Journal of Prosthetic Dentistry
Volume 83, Issue 2 , Pages 161-165 , February 2000

Accuracy of three polyvinyl siloxane putty-wash impression techniques

  • Joseph Nissan, DMD

      Affiliations

    • Instructor, Department of Prosthetic Dentistry
    • ,
  • Ben-Zion Laufer, DMD, MSD

      Affiliations

    • Former Director, Graduate Prosthodontics, Department of Prosthetic Dentistry
    • ,
  • Tamar Brosh, PhD

      Affiliations

    • Lecturer, Department of Prosthetic Dentistry
    • ,
  • David Assif, DMD

      Affiliations

    • Associate Professor and Head, Department of Department of Prosthetic Dentistry

References 

  1. Sorensen SE, Larsen IB, Jorgensen KD. Gingival and alveolar bone reaction to marginal fit of subgingival crown margins. Scand J Dent Res. 1986;94:109–114
  2. Philips RW. Skinner’s science of dental materials. In: 9th ed. Philadelphia: WB Saunders; 1991;p. 145–156
  3. McCabe JF, Wilson HJ. Addition curing silicone rubber impression materials. An appraisal of their physical properties. Br Dent J. 1978;145:17–20
  4. Braden M, Elliott JC. Characterization of the setting process of silicone dental rubbers. J Dent Res. 1966;45:1016–1023
  5. Yeh CL, Powers JM, Craig RG. Properties of addition-type silicone impression materials. J Am Dent Assoc. 1980;101:482–484
  6. Lacy AM, Fukui H, Bellman T, Jendresen MD. Time-dependent accuracy of elastomeric impression materials. Part II: polyether, polysulfides and polyvinylsiloxane. J Prosthet Dent. 1981;45:329–333
  7. Craig RG. Review of dental impression materials. Adv Dent Res. 1988;2:51–64
  8. Morgano SM, Milot P, Ducharme P, Rose L. Ability of various impression materials to produce duplicate dies from successive impressions. J Prosthet Dent. 1995;73:333–340
  9. Chee WW, Donovan TE. Polyvinyl siloxane impression materials: a review of properties and techniques. J Prosthet Dent. 1992;68:728–732
  10. Donovan TE, Chee WW. Impression techniques for fixed prosthodontics and operative dentistry. Calif Inst Continuing Educ. 1989;28:3
  11. Hung SH, Purk JH, Tira DE, Eick JD. Accuracy of one-step versus two-step putty wash addition silicone impression technique. J Prosthet Dent. 1992;67:583–589
  12. Idris B, Houston F, Claffey N. Comparison of the dimensional accuracy of one- and two-step techniques with the use of putty/wash addition silicone impression materials. J Prosthet Dent. 1995;74:535–541
  13. Eames WB, Sieweke C, Wallace SW, Rogers LB. Elastomeric impression materials: effect of bulk on accuracy. J Prosthet Dent. 1979;41:304–307
  14. Williams PT, Jackson GD, Bergman W. An evaluation of the time-dependent dimensional stability of eleven elastomeric impression materials. J Prosthet Dent. 1984;52:120–125
  15. Donovan TE. A review of contemporary impression materials. Calif Inst Continuing Educ. 1988;27:9–19
  16. Takahashi H, Finger WJ. Effects of setting on the accuracy of double-mix impressions made with addition-curing silicone. J Prosthet Dent. 1994;72:78–84
  17. Saunders WP, Sharkey SW, Smith GM, Taylor WG. Effect of impression tray design and impression technique upon the accuracy of stone casts produced from a putty-wash polyvinyl siloxane impression materials. J Dent. 1991;19:283–289
  18. Pameijer CH. A one-step putty-wash impression technique utilizing vinyl polysiloxanes. Quintessence Int. 1983;14:861–863
  19. Johnson GH, Craig RG. Accuracy of addition silicones as a function of technique. J Prosthet Dent. 1986;55:197–203
  20. Marshak B, Assif D, Pilo R. A controlled putty-wash impression technique. J Prosthet Dent. 1990;64:635–636
  21. Johnson GH, Craig RG. Accuracy of four types of rubber impression materials compared with time of pour and a repeat pour of models. J Prosthet Dent. 1985;53:484–490
  22. Lewinstein I. The ratio between vertical and horizontal changes of impressions. J Oral Rehabil. 1993;20:107–114
  23. Eames WB, Sieweke JC. Seven acrylic resins for custom trays and five putty-wash systems compared. Oper Dent. 1980;5:162–167
  24. Johnson GH, Drennon DG. Clinical evaluation of detail reproduction of elastomeric impression materials. J Dent Res. 1987;66:331
  25. Revised American Dental Association Specification no. 19 for Non-aqueous, Elastomeric Dental Impression Materials. J Am Dent Assoc. 1977;94:733–741

☆ Reprint requests to: DR JOSEPH NISSAN, DEPARTMENT OF PROSTHETIC DENTISTRY, MAURICE AND GABRIELA GOLDSCHLEGER SCHOOL OF DENTAL MEDICINE, TEL AVIV UNIVERSITY, TEL AVIV, ISRAEL, FAX: +972-3-6409250, E-MAIL: nissandr@post.tau.ac.il

☆☆ 0022-3913/2000/$12.00 + 0. 10/1/104281

PII: S0022-3913(00)70106-5

Journal of Prosthetic Dentistry
Volume 83, Issue 2 , Pages 161-165 , February 2000

Article Tools

* Image Usage & Resolution