Journal of Prosthetic Dentistry
Volume 83, Issue 2 , Pages 187-193 , February 2000

Evaluation of the dimensional changes and surface roughness of gold crowns cast with rapidly prepared phosphate-bonded investment: A pilot study

References 

  1. Cooney JP, Caputo AA. Type III gold alloy complete crowns cast in a phosphate-bonded investment. J Prosthet Dent. 1981;46:414–419
  2. Papadopoulos T, Axelsson M. Influence of heating rate in thermal expansion of dental phosphate-bonded investment material. Scand J Dent Res. 1990;98:60–65
  3. Jones DW, Wilson HJ. Variables affecting the thermal expansion of refractory investments. Br Dent J. 1968;125:249–255
  4. Bailey JH, Sherrard DJ. Post-and-core assemblies made with an accelerated pattern elimination technique. J Prosthodont. 1994;3:47–52
  5. Jorgensen KD, Okamoto A. Restraining factors affecting setting expansion of phosphate-bonded investments. Scand J Dent Res. 1986;94:178–181
  6. Hutton JE, Marshall GW. The expansion of phosphate-bonded investments: part I—setting expansion. J Prosthet Dent. 1993;70:121–125
  7. Santos JF, Ballester RY. Delayed hygroscopic expansion of phosphate-bonded investments. Dent Mater. 1987;3:165–167
  8. Stevens L. The effect of time between mixing and heating on expansion of phosphate bonded investment. Aust Dent J. 1986;31:207–213
  9. Rantanen T, Eerikäinen E. Accuracy of the palatal plate of removable partial dentures, and influence of laboratory handling of the investment on the accuracy. Dent Mater. 1986;2:28–31
  10. Luk HW, Darvell BW. Effect of burnout temperatures on strength of phosphate-bonded investments—part II: effect of metal temperature. J Dent. 1997;25:423–430
  11. Hutton JE, Marshall GW. Expansion of phosphate-bonded investments: part II—thermal expansion. J Prosthet Dent. 1995;73:126–131
  12. Takahashi J, Okazaki M, Kimura H, Haeuchi Y, Kubo F. Effect of the porosity of the filler aggregates on the setting expansion of investment material. J Dent Res. 1988;67:1278–1283
  13. Junner RE, Stevens L. Anisotropic setting expansion of phosphate bonded investment. Aust Dent J. 1986;31:434–439
  14. Luk HW, Darvell BW. Effect of burnout temperature on strength of phosphate-bonded investments. J Dent. 1997;25:153–160
  15. Earnshaw R, Morey EF, Edelman DC. The effect of potential investment expansion and hot strength on the fit of full crown castings made with phosphate-bonded investment. J Oral Rehabil. 1997;24:532–539
  16. Brockhurst PJ, McLaverty VG, Kasloff Z. A castability standard for alloys used in restorative dentistry. Oper Dent. 1983;8:130–139
  17. Stevens L, Okamoto A, Jörgensen KD. Dimensional change in mould space on setting of phosphate bonded investment. Aust Dent J. 1985;30:281–284
  18. Stevens L. The effect of early heating on the expansion of phosphate bonded investment. Aust Dent J. 1983;28:366–369
  19. Jones DW, Wilson HJ. Setting and hygroscopic expansion of investments. Br Dent J. 1970;129:22–26
  20. Meiser ET, de Rijk WG, Tesk JA, Hinman RW, Hesby RA, Pelleu GB. Internal setting expansion of a dental casting investment measured with strain gauges. J Prosthet Dent. 1985;53:870–873
  21. Bessing C. Evaluation of the castability of four different alternative alloys by measuring the marginal sharpness. Acta Odontol Scand. 1986;44:165–172
  22. Barreto MT, Goldberg AJ, Nitkin DA, Mumford G. Effect of investment on casting high-fusing alloys. J Prosthet Dent. 1980;44:504–507
  23. Naylor WP, Moore BK, Phillips RW, Goodacre CJ, Muñoz CA. Comparison of two tests to determine the castability of dental alloys. Int J Prosthodont. 1990;5:413–424

☆ Reprint requests to: DR RONALD B. BLACKMAN, 13235 HUNTERS SPRING, SAN ANTONIO, TX 78230, E-MAIL: rblackmn@flash.net

☆☆ 0022-3913/2000/$12.00 + 0. 10/1/104621

PII: S0022-3913(00)70110-7

Journal of Prosthetic Dentistry
Volume 83, Issue 2 , Pages 187-193 , February 2000

Article Tools

* Image Usage & Resolution