Journal of Prosthetic Dentistry
Volume 83, Issue 2 , Pages 210-215 , February 2000

Shear bond strength of resin luting cement to glass-infiltrated porous aluminum oxide cores

  • Deniz Sen, DDS, PhD

      Affiliations

    • Associate Professor, Department of Prosthodontics, Faculty of Dentistry, Istanbul University
    • ,
  • Erdal Poyrazoglu, DDS, PhD

      Affiliations

    • Professor, Department of Prosthodontics, Faculty of Dentistry, Istanbul University
    • ,
  • Betül Tuncelli, DDS, PhD

      Affiliations

    • Professor, Department of Prosthodontics, Faculty of Dentistry, Istanbul University
    • ,
  • Gültekin Göller, DDS, PhD

      Affiliations

    • Associate Professor, Department of Metallurgical Engineering, Istanbul Technical University

References 

  1. Rinke S, Hüls A. Copy-milled aluminous core ceramic crowns: a clinical report. J Prosthet Dent. 1996;76:343–346
  2. Carrier DD, Kelly JR. In-Ceram failure behavior and core-veneer interface quality as influenced by residual infiltration glass. J Prosthodont. 1995;4:237–242
  3. Kraivixien-Vonghantuset R, Pietrobon N, Nathanson D. Bond strength of resin cement to In-Ceram core materials. J Dent Res. 1992;71:141; (IADR Abstracts)
  4. Neikes MJ, Kern M, Strub JR. Tensile bond strength of two silicoating systems on the AI D ceramics In-Ceram. J Dent Res. 1992;71:144; (IADR Abstracts)
  5. Thompson JY, Rapp MM, Parker AJ. Microscopic and energy dispersive x-ray analysis of surface adaptation of dental cements to dental ceramic surfaces. J Prosthet Dent. 1998;79:378–383
  6. Isidor F, Stokholm R, Ravnholt G. Tensile bond strength of resin luting cement to glass infiltrated porous aluminum oxide cores (In-Ceram). Eur J Prosthodont Restor Dent. 1995;3:199–202
  7. Lambrechts P, Inokoshi S, van Meerbeek B, Williams G, Braem M, Vanherle G. Classification and potential of composite luting materials. In:  Morman W editors. International Symposium on Computer Restorations. Berlin: Quintessence Books; 1991;p. 61–90
  8. Tabat Y, Amano H. Study of anterior adhesive bridges and splints using newly developed adhesive resins. J Gnathol. 1985;4:73–85
  9. Omura J, Yamauchi J, Harada I, Wada T. Adhesive and mechanical properties of a new dental adhesive. J Dent Res. 1984;63:233; (abstract)
  10. Pape FW, Pfeiffer P, Marx R. Bond strength of etched In-Ceram to tooth enamel. [in German] ZWR. 1991;100:450–453
  11. Stangel I, Nathanson D, Hsu CS. Shear strength of the composite bond to etched porcelain. J Dent Res. 1987;66:1460–1465
  12. Wolf DM, Powers JM, O’Keefe KL. Bond strength of composite to etched and sandblasted porcelain. Am J Dent. 1993;6:155–158
  13. Sadoun M, Asmussen E. Bonding of resin cements to an aluminous ceramic: a new surface treatment. Dent Mater. 1994;10:185–189
  14. van Noort R. Dental materials. In: London: CV Mosby; 1994;p. 66
  15. Kern M, Thompson VP. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent. 1995;73:240–249
  16. Wood DJ, Bubb NL, Millar BJ, Dunne SM. Preliminary investigation of a novel retentive system for hydrofluoric acid etch-resistant dental ceramics. J Prosthet Dent. 1997;78:275–280
  17. Kern M, Thompson VP. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent. 1994;71:453–461

☆ Reprint requests to: DR DENIZ SEN, DEPARTMENT OF PROSTHETIC DENTISTRY, ISTANBUL UNIVERSITY, 34390 ISTANBUL, TURKEY, FAX: (90)212-534-44-96,E-MAIL: dsen@istanbul.edu.tr

☆☆ 0022-3913/2000/$12.00 + 0. 10/1/102933

PII: S0022-3913(00)70113-2

Journal of Prosthetic Dentistry
Volume 83, Issue 2 , Pages 210-215 , February 2000

Article Tools

* Image Usage & Resolution