Journal of Prosthetic Dentistry
Volume 83, Issue 3 , Pages 323-331 , March 2000

Comparison of impression materials for direct multi-implant impressions

References 

  1. Jemt T, Carlsson L, Boss A, Jorneus L. In vivo load measurements on osseointegrated implants supporting fixed or removable prostheses: a comparative pilot study. Int J Oral Maxillofac Implants. 1991;6:413–417
  2. Jemt T. Three-dimensional distortion of gold-alloy castings and welded titanium frameworks: measurements of the precision of fit between completed implant prostheses and the master cast in routine edentulous situations. J Oral Rehabil. 1995;22:557–564
  3. Jemt T. In vivo measurements of precision of fit involving implant-supported prostheses in the edentulous jaw. Int J Oral Maxillfac Implants. 1996;11:151–158
  4. Tan KB. The clinical significance of distortion in implant prosthodontics: is there such a thing as passive fit?. Ann Acad Med Singapore. 1995;24:138–157
  5. Wee AG, Aquilino SA, Schneider RL. Strategies to achieve fit in implant prosthodontics: a review of the literature. Int J Prosthodont. 1999;12:167–178
  6. Jemt T, Rubenstein JE, Carlsson L, Lang BR. Measuring fit at the implant prosthodontic interface. J Prosthet Dent. 1996;75:314–324
  7. Riedy SJ, Lang BF, Lang BE. Fit of implant framework fabricated by different techniques. J Prosthet Dent. 1997;78:596–604
  8. Jemt T, Linden B. Fixed implant supported prosthesis with welded titanium frameworks. Int J Periodontics Restorative Dent. 1992;12:177–183
  9. Linehan AD, Windeler AS. Passive fit of implant-retained prosthetic framework improved by electric discharge machining. J Prosthodont. 1994;3:88–95
  10. Schmitt SM, Chance DA. Fabrication of titanium implant-retained restorations with nontraditional machining techniques. Int J Prosthodont. 1995;8:332–336
  11. LaBarge KW. Electrical discharge machining. J Dent Technol. 1997;14:19–22
  12. Hsu CC, Millstein PL, Stein RS. A comparative analysis of the accuracy of implant transfer techniques. J Prosthet Dent. 1993;69:588–593
  13. Vigolo P, Millstein PL. Evaluation of master cast technique for multiple abutment implant prostheses. Int J Oral Maxillofac Implants. 1993;8:439–445
  14. Wee AG, Schneider RL, Aquilino SA, Huff TL, Lindquist TJ, Williamson DL. Evaluation of the accuracy of solid implant casts. J Prosthodont. 1998;7:161–169
  15. Barrett MG, de Rijk WG, Burgess JO. The accuracy of six impression techniques for osseointegrated implants. J Prosthodont. 1993;2:75–82
  16. Humphries RM, Yaman P, Bloem TJ. The accuracy of implant master casts constructed from transfer impressions. Int J Oral Maxillofac Implants. 1990;5:331–336
  17. Spector M, Donovan TE, Nicholls JI. An evaluation of impression techniques for osseointegrated implants. J Prosthet Dent. 1990;63:444–447
  18. Carr AB. Comparison of impression techniques for a five-implant mandibular model. Int J Oral Maxillofac Implants. 1991;6:448–455
  19. Carr AB. Comparison of impression techniques for a two-implant 15-degree divergent model. Int J Oral Maxillofac Implants. 1992;7:468–475
  20. Assif D, Fenton AH, Zarb GA, Schmitt A. Comparative accuracy of implant impression procedures. Int J Periodontics Restorative Dent. 1992;12:113–121
  21. Phillips KM, Nicholls JI, Ma T, Rubenstein JE. The accuracy of three implant impression techniques: a 3-dimensional analysis. Int J Oral Maxillofac Implants. 1994;9:533–540
  22. Assif D, Marshak B, Schmidt A. Accuracy of implant impression techniques. Int J Oral Maxillofac Implants. 1996;11:216–222
  23. Finger IM, Guerra LR. Prosthetic consideration in reconstructive implantology. Dent Clin North Am. 1986;30:69–83
  24. Rasmussen EJ. Alternative prosthodontic technique for tissue-integrated prostheses. J Prosthet Dent. 1987;57:198–204
  25. Inturregui JA, Aquilino SA, Ryther JS, Lund PS. Evaluation of three impression techniques for osseointegrated oral implants. J Prosthet Dent. 1993;69:503–509
  26. Burawi G, Houston F, Byme D, Claffey N. A comparison of the dimensional accuracy of the splinted and unsplinted impression techniques for Bone-Lock implant system. J Prosthet Dent. 1997;77:68–75
  27. Liou AD, Nicholls JI, Yuodelis RA, Brudvik JS. Accuracy of replacing three tapered transfer impression copings into two elastomeric impression materials. Int J Prosthodont. 1993;6:377–383
  28. Tautin FS. Impression making for osseointegrated dentures. J Prosthet Dent. 1985;54:250–251
  29. Zarb GA, Jansson TP. Prosthodontic procedures and laboratory procedures and protocol. In:  Brånemark PI,  Zarb GA,  Albrektsson L editor. Tissue integrated prostheses. Chicago: Quintessence; 1985;p. 241–282 293-315, 233-40, 317-27
  30. Taylor R, Bergman G. Laboratory techniques for the Brånemark system. Chicago: Quintessence; 1990;
  31. Goll GE. Production of accurately fitting full-arch implant frameworks: part I—clinical procedures. J Prosthet Dent. 1991;66:377–384
  32. Schneider RL, Wee AG. Fabricating low-fusing metal casts for more accurate implant prosthodontics. J Prosthodont. 1996;5:301–303
  33. Dixon DL, Breeding LC, Brown JS. The effect of custom tray material type and adhesive drying time on the tensile bond strength of an impression material/adhesive system. Int J Prosthodont. 1994;7:129–133
  34. American Dental Association . Revised American Dental Association specification No: 19 for non-aqueous, elastomeric dental impression materials. J Am Dent Assoc. 1977;94:733–741
  35. SAS Institute 1 . SAS User’s Guide: Basic. 5 ed. Cary, NC: SAS Institute Inc; 1985;
  36. Arlo K. Evaluation of the Vident die and model system. Report No.: Project 90-63 San Antonio: USAF Dental Investigation Services; 1991;
  37. Nicholls JI. The measurement of distortion: concluding remarks. J Prosthet Dent. 1980;43:218–223
  38. Petropoulos VC, Weintraub A, Weintraub GS. Predoctoral fixed prosthodontics curriculum survey. J Prosthodont. 1998;7:183–191
  39. Arbree NS, Fleck F, Askinas SW. The results of a brief survey of complete denture prosthodontic techniques in predoctoral programs in North American dental schools. J Prosthodont. 1996;5:219–225
  40. Chai J, Takahashi Y, Lautenschlager EP. Clinically relevant mechanical properties of elastomeric impression materials. Int J Prosthodont. 1998;11:219–223
  41. Rosenstiel SF, Land MF, Fujimoto J. Tissue management and impression making. In: 2nd ed.  Rosenstiel SF,  Land MF,  Fujimoto J editor. Contemporary fixed prosthodontics. St Louis: Mosby; 1995;p. 314–317
  42. Nicholls JI. The measurement of distortion: theoretical considerations. J Prosthet Dent. 1977;37:578–586
  43. Carr AB, Master J. The accuracy of implant verification casts compared with casts produced from a rigid transfer coping technique. J Prosthodont. 1996;5:248–252
  44. Skalak R. Biomechanical considerations in osseointegrated prostheses. J Prosthet Dent. 1983;49:843–848
  45. Tan KB, Rubenstein JE, Nicholls JI, Yuodelis RA. Three dimensional analysis of the casting accuracy of one-piece, osseointegrated implant retained prosthesis. Int J Prosthodont. 1993;6:346–363
  46. Ness EM, Nicholls JI, Rubenstein JE, Smith DE. Accuracy of the acrylic pattern resin for the implant-retained prosthesis. Int J Prosthodont. 1992;5:542–549
  47. Jemt T, Lie A. Accuracy of implant-supported prostheses in the edentulous jaw: analysis of precision of fit between cast gold-alloy frameworks and master casts by means of a three-dimensional photogrammetric technique. Clin Oral Implants Res. 1995;6:172–180
  48. Craig RG. Restorative dental materials. 10th ed. St Louis: Mosby; 1997;

☆ This project was supported in part by funds from The Ohio State University College of Dentistry and presented in part at the 1999 International Association of Dental Research Annual Session as a finalist for the 1999 Arthur R. Frechette Prosthodontic Research Award competition.

☆☆ Reprint requests to: Dr Alvin G. Wee, Section of Restorative Dentistry, Prosthodontics and, Endodontics, College of Dentistry, the Ohio State University, 305 W 12th Ave, Columbus, OH 43210-1241, FAX: 614-292-9422, E-MAIL: Wee.12@osu.edu

PII: S0022-3913(00)70136-3

Journal of Prosthetic Dentistry
Volume 83, Issue 3 , Pages 323-331 , March 2000

Article Tools

* Image Usage & Resolution