« Previous
Next »
Journal of Prosthetic Dentistry
Volume 86, Issue 5
, Pages 511-519
, November 2001
Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: Effect of luting agent and tooth or tooth-substitute core structure
References
- . Survival of Dicor glass-ceramic dental restorations over 14 years: Part I. Survival of Dicor complete coverage restorations and effect of internal surface acid etching, tooth position, gender, and age. J Prosthet Dent. 1999;81:23–32
- . Survival of Dicor glass-ceramic dental restorations over fourteen years. Part II: effect of thickness of Dicor material and design of tooth preparation. J Prosthet Dent. 1999;81:662–667
- . A compressive strength study of an all-ceramic crown. J Prosthet Dent. 1985;53:301–303
- . A compressive strength study of complete ceramic crowns. Part II. J Prosthet Dent. 1991;65:388–391
- . Fracture strength of all-ceramic crowns. Int J Prosthodont. 1994;7:329–338
- . Apparent fracture toughness of all-ceramic crown systems. J Prosthet Dent. 1989;62:529–532
- . Relative flexural strength of six new ceramic materials. Int J Prosthodont. 1995;8:239–246
- . Fracture-surface analysis of dental ceramics. J Prosthet Dent. 1989;62:536–541
- . Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 1999;81:652–661
- . Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res. 1994;73:1824–1832
- . Physiological aging of an all-ceramic restorative material. Dent Mater. 1991;7:133–137
- . DICOR surface treatments for enhanced bonding. J Dent Res. 1988;67:925–931
- . Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic. J Prosthet Dent. 1993;70:224–233
- . Tensile stress in glass-ceramic crowns: effect of flaws and cement voids. Int J Prosthodont. 1992;5:351–358
- . Microscopic and energy dispersive x-ray analysis of surface adaptation of dental cements to dental ceramic surfaces. J Prosthet Dent. 1998;79:378–383
- . A comparison of the shear bond strength between two composite resins and two etched ceramic materials. Int J Prosthodont. 1988;1:73–79
- . Shear bond strength of Dicor using resin adhesive systems and light activated cement. J Esthet Dent. 1991;3:95–99
- . Effect of luting media on the compressive strengths of two types of all-ceramic crown. Quintessence Int. 1993;24:405–408
- . Fracture resistance to teeth restored with dentin-bonded crowns. Quintessence Int. 1994;25:335–340
- . The influence of different cementation modes on the fracture resistance of feldspathic ceramic crowns. Int J Prosthodont. 1997;10:169–177
- . Effect of cement film thickness on the fracture resistance of a machinable glass-ceramic. Dent Mater. 1994;10:172–177
- . The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont. 1993;6:462–467
- . Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont. 1990;3:430–440
- Principles, concepts and practices in prosthodontics—1994. Academy of Prosthodontics. J Prosthet Dent. 1995;73:73–94
- . Mechanical characterization of dental ceramics by Hertzian contacts. J Dent Res. 1998;77:589–602
☆ aClinical Professor, Postgraduate Prosthodontics, Tufts University School of Dental Medicine; Private Practice, Boston, Mass.
☆☆ bSenior Staff Member and Chairman, Department of Periodontology, The Forsyth Institute.
★ Reprint requests to: Dr Kenneth A. Malament, 50 Staniford St, Boston, MA 02114, Fax: (617)367-9145, E-mail: kenmalament@attglobal.net
PII: S0022-3913(01)30191-9
doi: 10.1067/mpr.2001.119415
© 2001 Editorial Council of The Journal of Prosthetic Dentistry. Published by Elsevier Inc All rights reserved.
« Previous
Next »
Journal of Prosthetic Dentistry
Volume 86, Issue 5
, Pages 511-519
, November 2001

