Journal of Prosthetic Dentistry
Volume 88, Issue 2 , Pages 145-150 , August 2002

Tensile bond strength of acrylic resin denture teeth to a microwave- or heat-processed denture base

References 

  1. Cunningham JL, Benington IC. An investigation of the variables which may affect the bond between plastic teeth and denture base resin. J Dent. 1999;27:129–135
  2. Thean HP, Chew CL, Goh KI. Shear bond strength of denture teeth to a base: a comparative study. Quintessence Int. 1996;27:425–428
  3. Barpal D, Curtis DA, Finzen F, Perry J, Gansky SA. Failure load of acrylic resin denture teeth bonded to high impact acrylic resins. J Prosthet Dent. 1998;80:666–671
  4. Cunningham JL, Benington IC. Bond strength variation of synthetic resin teeth in dentures. Int J Prosthodont. 1995;8:69–72
  5. Nishii M. [Studies on the curing of denture base resins with microwave irradiation.]. J Osaka Dent Univ. 1968;2:23–40 Japanese
  6. Schneider RL. Microwave processing of acrylic resin. Trends Tech Contemp Dent Lab. 1995;12:29–33
  7. De Clerck JP. Microwave polymerization of acrylic resins used in dental prostheses. J Prosthet Dent. 1987;57:650–658
  8. Turck MD, Richards MW. Microwave processing for denture relines, repairs, and rebases. J Prosthet Dent. 1993;69:340–343
  9. Yunus N, Harrison A, Huggett R. Effect of microwave irradiation on the flexural strength and residual monomer levels of an acrylic resin repair material. J Oral Rehabil. 1994;21:641–648
  10. Wallace PW, Graser GN, Myers ML, Proskin HM. Dimensional accuracy of denture resin cured by microwave energy. J Prosthet Dent. 1991;66:403–408
  11. Reitz PV, Sanders JL, Levin B. The curing of denture acrylic resins by microwave energy. Physical properties. Quintessence Int. 1985;16:547–551
  12. Truong VT, Thomasz FG. Comparison of denture acrylic resins cured by boiling water and microwave. Aust Dent J. 1988;33:201–204
  13. Sanders JL, Levin B, Reitz PV. Porosity in denture acrylic resins cured by microwave energy. Quintessence Int. 1987;18:453–456
  14. Polyzois GL, Zissis AJ. Comparison of the toughness of denture bases cured by microwaves or dry heat. Compend Contin Educ Dent. 1995;16:228–230-232
  15. Ilbay SG, Güvener S, Alkumru HN. Processing dentures using a microwave technique. J Oral Rehabil. 1994;21:103–109
  16. Alkhatib MB, Goodacre CJ, Swartz ML, Munoz-Viveros CA, Andres CJ. Comparison of microwave-polymerized denture base resins. Int J Prosthodont. 1990;3:249–255
  17. Takamata T, Setcos JC, Phillips RW, Boone ME. Adaptation of acrylic resin dentures as influenced by the activation mode of polymerization. J Am Dent Assoc. 1989;119:271–276
  18. Vallittu PK, Ruyter IE, Nat R. The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers. J Prosthet Dent. 1997;78:194–199
  19. Geerts GA, Jooste CH. A comparison of the bond strengths of microwave- and water bath-cured denture material. J Prosthet Dent. 1993;70:406–409
  20. Clancy JM, Hawkins LF, Keller JC, Boyer DB. Bond strength and failure analysis of light-cured denture resins to denture teeth. J Prosthet Dent. 1991;65:315–324

☆ Reprint requests to: Dr Robert L. Schneider, Department of Prosthodontics, 424 Dental Science South, College of Dentistry S-413, The University of Iowa, Iowa City, IA 52242-1001, Fax: (319)353-4278, E-mail: robert-schneider@uiowa.edu

☆☆ aClinical Professor, Department of Prosthodontics.

★ bOrthodontic resident.

★★ cAssociate Professor, Department of Prosthodontics.

PII: S0022-3913(02)00071-9

doi: 10.1067/mpr.2002.127898

Journal of Prosthetic Dentistry
Volume 88, Issue 2 , Pages 145-150 , August 2002

Article Tools

* Image Usage & Resolution