« Previous
Next »
Journal of Prosthetic Dentistry
Volume 88, Issue 3
, Pages 252-254
, September 2002
New approach to bonding all-ceramic adhesive fixed partial dentures: A clinical report
References
- . The all porcelain, resin-bonded bridge. Quintessence Int. 1991;22:257–262
- . Three-year comparison of fired ceramic inlays cemented with composite resin or glass ionomer cement. Acta Odontol Scand. 1994;52:140–149
- . Fracture-surface analysis of dental ceramics. J Prosthet Dent. 1989;62:536–541
- . Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont. 1990;3:430–440
- . Microscopic and energy dispersive x-ray analysis of surface adaptation of dental cements to dental ceramic surfaces. J Prosthet Dent. 1998;79:378–383
- . Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent. 1994;72:355–359
- . Shear strength of the composite bond to etched porcelain. J Dent Res. 1987;66:1460–1465
- . Tensile bond to resin cements to porcelain veneers. J Prosthet Dent. 1988;60:443–447
- . Bond strength of composite to porcelain treated with new porcelain repair agents. Dent Mater. 1992;8:158–161
- . Adhesion of composite to porcelain with various surface conditions. J Prosthet Dent. 1995;73:464–470
- . Shear bond strength to feldspathic porcelain of two luting cements in combination with three surface treatments. J Prosthet Dent. 1997;78:511–517
- . Porcelain-composite interface microleakage with various porcelain surface treatments. Dent Mater. 1991;7:118–123
- . Comparison of acidulated phosphate fluoride gel and hydrofluoric acid etchants for porcelain-composite repair. J Prosthet Dent. 1994;72:121–127
- . Effects of treatment and storage conditions on ceramic/composite bond strength. J Dent Res. 1995;74:381–387
- . SEM evaluation of etch patterns by three etchants on three porcelains. J Prosthet Dent. 1990;64:734–739
- . Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont. 2000;13:131–135
- . The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont. 2001;14:335–339
- . Adhesive monomers for porcelain repair. Int J Prosthodont. 1989;2:483–489
- . Fatigue life of porcelain repair systems. Int J Prosthodont. 1992;5:205–213
- . A brief history and current status of metal- and ceramic-surface conditioning concepts for resin bonding in dentistry. Quintessence Int. 1998;29:713–724
- . Silicoating: evaluation of a new method of bonding composite resin to metal. Scand J Dent Res. 1988;96:171–176
- . Effects of surface treatments on shear bond strengths between a resin cement and an alumina core. J Prosthet Dent. 2000;83:644–647
- . Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements. Int J Prosthodont. 2000;13:221–226
-
.
Approaches for intraoral repair of ceramic restorations.
Compendium. 2000;21:629–635
642-4; quiz 646
☆ Reprint requests to: Dr Mutlu Ozcan, Universitair Docent, Oral Health Institute, Faculty of Medical Sciences, University of Groningen, Antonius Deusinglaan 1, 9713 AV Groningen, The Netherlands, Fax: (31)50-363-2696, E-mail: mutluozcan@hotmail.com
☆☆ aAssistant Professor and Lecturer, Department of Prosthodontics.
★ bPhD student, Department of Prosthodontics.
PII: S0022-3913(02)00193-2
doi: 10.1067/mpr.2002.127897
© 2002 Editorial Council of The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.
« Previous
Next »
Journal of Prosthetic Dentistry
Volume 88, Issue 3
, Pages 252-254
, September 2002

