Journal of Prosthetic Dentistry
Volume 89, Issue 5 , Pages 479-488 , May 2003

Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics

  • Gilberto Antonio Borges, DDS, MS

      Affiliations

    • Assistant Professor, Department of Dental Materials, University of Uberaba, Uberaba, Brazil
    • ,
  • Ana Maria Sophr, DDS, MS, PhD

      Affiliations

    • Associate Professor, Department of Dental Materials, Pontificial Catholic University of Rio Grande do Sul, Brazil
    • ,
  • Mario Fernando de Goes, DDS, MS, PhD

      Affiliations

    • Professor, Department of Dental Materials, University of Campinas, Campinas, Brazil
    • Corresponding Author InformationReprint requests to:Dr Mario Fernando De Goes, Av. Limeira, 901, Cep 13414-900, Piracicaba—Sao Paulo, Brazil, Fax: 19-3412-5218
    • ,
  • Lourenço Correr Sobrinho, DDS, MS, PhD

      Affiliations

    • Associate Professor, Department of Dental Materials, University of Campinas, Campinas, Brazil
    • ,
  • Daniel C.N Chan, DDS, MS

      Affiliations

    • Associate Professor, Department of Oral Rehabilitation, Division of Operative Dentistry, Medical College of Georgia, Augusta, Ga, USA

References 

  1. McLean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J. 1965;119:251–267
  2. Jones DW. Development of dental ceramics. An historical perspective. Dent Clin North Am. 1985;29:621–644
  3. van Noort R. Introduction to dental materials. St. Louis: Mosby; 1994;

    . p. 201-14

  4. Brecker SC. Porcelain baked to gold—a new medium in prosthodontics. J Prosthet Dent. 1956;6:801–810
  5. Dunworth FD. Porcelain fused to gold. J Prosthet Dent. 1958;8:635–639
  6. Hondrum SO. A review of the strength properties of dental ceramics. J Prosthet Dent. 1992;67:859–865
  7. Anusavice KJ. Recent developments in restorative dental ceramics. J Am Dent Assoc. 1993;124:72–74

    76-8, 80-4

  8. Gwinnett AJ, Matsui A. A study of enamel adhesives. The physical relationship between enamel and adhesive. Arch Oral Biol. 1967;12:1615–1620
  9. Fusayama T, Nakamura M, Kurosaki N, Iwaku M. Non-pressure adhesion of a new adhesive restorative resin. J Dent Res. 1979;58:1364–1370
  10. Nakabayashi N, Kojima K, Masuhara E. The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res. 1982;16:265–273
  11. Thurmond JW, Barkmeier WW, Wilwerding TM. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent. 1994;72:355–359
  12. Kato H, Matsumura H, Tanaka T, Atsuta M. Bond strength and durability of porcelain bonding systems. J Prosthet Dent. 1996;75:163–168
  13. Stangel I, Nathanson D, Hsu CS. Shear strength of the composite bond to etched porcelain. J Dent Res. 1987;66:1460–1465
  14. Yen TW, Blackman RB, Baez RJ. Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic. J Prosthet Dent. 1993;70:224–233
  15. Holand W, Schweiger M, Frank M, Rheinberger V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J Biomed Mater Res. 2000;53:297–303
  16. Kato H, Matsumura H, Atsuta M. Effect of etching and sandblasting on bond strength to sintered porcelain of unfilled resin. J Oral Rehabil. 2000;27:103–110
  17. Sen D, Poyrazoglu E, Tuncelli B, Goller G. Shear bond strength of resin luting cement to glass-infiltrated porous aluminum oxide cores. J Prosthet Dent. 2000;83:210–215
  18. Bowen RL. Properties of a silica-reinforced polymer for dental restorations. J Am Dent Assoc. 1963;66:57–64
  19. Paffenbarger GC, Sweeney WT, Bowen RL. Bonding porcelain teeth to acrylic resins denture bases. J Am Dent Assoc. 1967;74:1018–1023
  20. Newburg R, Pameijer CH. Composite resins bonded to porcelain with silane solution. J Am Dent Assoc. 1978;96:288–291
  21. Sheth J, Jensen M, Tolliver D. Effect of surface treatment on etched porcelain bond strength to enamel. Dent Mater. 1988;4:328–337
  22. Kamada K, Yoshida M, Atsuta M. Effect of ceramic treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent. 1998;79:508–513
  23. Chen JH, Matsumura H, Atsuta M. Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain. J Dent. 1998;26:53–58
  24. Kern M, Thompson VP. Bonding to glass infiltrated alumina ceramic (adhesive methods and their durability). J Prosthet Dent. 1995;73:240–249
  25. Ozcan M, Alkumru HN, Gemalmaz D. The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont. 2001;14:335–339
  26. Awliya W, Oden A, Yaman P, Dennison JB, Razzoog ME. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol Scand. 1998;56:9–13

PII: S0022-3913(02)52704-9

doi: 10.1016/S0022-3913(02)52704-9

Journal of Prosthetic Dentistry
Volume 89, Issue 5 , Pages 479-488 , May 2003

Article Tools

* Image Usage & Resolution