Journal of Prosthetic Dentistry
Volume 89, Issue 2 , Pages 154-160 , February 2003

An in vitro study of the compressive load at fracture of Procera AllCeram crowns with varying thickness of veneer porcelain

Presented as an IADR 2000 abstract, Washington, D.C.

References 

  1. Donovan TE, Chee WW. Conservative indirect restorations for posterior teeth. Cast versus bonded ceramic. Dent Clin North Am. 1993;37:433–443
  2. Craig RG, Powers JM. Restorative Dental Materials. In: 11th ed. St Louis: Mosby; 2002;p. 551–592
  3. Andersson M, Razzoog ME, Oden A, Hegenbarth EA, Lang BR. Procera: a new way to achieve an all-ceramic crown. Quintessence Int. 1998;29:285–296
  4. Zeng K, Oden A, Rowcliffe D. Flexure tests on dental ceramics. Int J Prosthodont. 1996;9:434–439
  5. White SN, Caputo AA, Vidjak FM, Seghi RR. Moduli of rupture of layered dental ceramics. Dent Mater. 1994;10:52–58
  6. Kelly JR, Tesk JA, Sorensen JA. Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling. J Dent Res. 1995;74:1253–1258
  7. Wagner WC, Chu TM. Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics. J Prosthet Dent. 1996;76:140–144
  8. Zeng K, Oden A, Rowcliffe D. Evaluation of mechanical properties of dental ceramic core materials in combination with porcelains. Int J Prosthodont. 1998;11:183–189
  9. Neiva G, Yaman P, Dennison JB, Razzoog ME, Lang BR. Resistance to fracture of three all-ceramic systems. J Esthet Dent. 1998;10:60–66
  10. Kelly JR, Giordano R, Pober R, Cima MJ. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont. 1990;3:430–440
  11. Thompson JY, Rapp MM, Parker AJ. Microscopic and energy dispersive x-ray analysis of surface adaptation of dental cements to dental ceramic surfaces. J Prosthet Dent. 1998;79:378–383
  12. Awliya W, Oden A, Yaman P, Dennison JB, Razzoog ME. Shear bond strength of a resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol Scand. 1998;56:9–13
  13. Thompson JY, Anusavice KJ, Naman A, Morris HF. Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res. 1994;73:1824–1832
  14. Kelly JR. Perspectives on strength. Dent Mater. 1995;11:103–110
  15. Wakabayashi N, Anusavice KJ. Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness. J Dent Res. 2000;79:1398–1404
  16. Sobrinho LC, Cattell MJ, Glover RH, Knowles JC. Investigation of the dry and wet fatigue properties of three all-ceramic crown systems. Int J Prosthodont. 1998;11:255–262
  17. Sobrinho LC, Consani S, Knowles JC. Effect of convergence angle and luting agent on the fracture strength of In Ceram crowns. J Mater Sci: Materials in Medicine. 1999;10:493–496
  18. Waltimo A, Kononen M. A novel bite force recorder and maximal isometric bite force values for healthy young adults. Scand J Dent Res. 1993;101:171–175
  19. Probster L. Compressive strength of two modern all-ceramic crowns. Int J Prosthodont. 1992;5:409–414
  20. Sulaiman F, Chai J, Jameson LM, Wozniak WT. A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. Int J Prosthodont. 1997;10:478–484
  21. Scherrer SS, de Rijk WG. The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont. 1993;6:462–467
  22. Anusavice KJ, Tsai YL. Stress distribution in ceramic crown forms as a function of thickness, elastic modulus, and supporting substrate. In:  Bumgardner JD,  Puckett AD editor. Proceedings of the Sixteenth Southern Biomedical Engineering Conference. Biloxi (MS): Institute of Electrical and Electronics Engineers; 1997;p. 246–267

☆ Reprint requests to: Dr Ailbhe McDonald, Department of Conservation, Eastman Dental Hospital and Institute for Oral Health Care Sciences, 256 Grays Inn Rd., London WCIX 8LD, UNITED KINGDOM, Fax: 44-020-7915-1028, Email: a.mcdonald@eastman.ucl.ac.uk

☆☆ Submitted in partial fulfillment of the requirements for the degree of Master of Science in Conservative Dentistry, Eastman Dental Institute for Oral Health Care Sciences, 1999.

★ aPostgraduate, Department of Conservation.

★★ bConsultant, Department of Conservation.

♢ cReader and Head of Unit, Department of Biomaterials.

♢♢ 0022-3913/2003/$30.00 + 0

PII: S0022-3913(03)00067-2

doi: 10.1067/mpr.2003.85

Journal of Prosthetic Dentistry
Volume 89, Issue 2 , Pages 154-160 , February 2003

Article Tools

* Image Usage & Resolution