Journal of Prosthetic Dentistry
Volume 89, Issue 6 , Pages 558-564 , June 2003

Tensile bond strength of four resin luting agents bonded to bovine enamel and dentin

  • Cristiane Soares Mota, DDS, MS

      Affiliations

    • Navy Dentist, Rio Grande, Brazil
    • ,
  • Flávio Fernando Demarco, DDS, PhD

      Affiliations

    • Associate Professor, Department of Operative Dentistry, Federal University of Pelotas, Pelotas, Brazil
    • Corresponding Author InformationReprint requests to: Dr Flávio Fernando Demarco, Federal University of Pelotas, School of Dentistry, Department of Operative Dentistry, Rua Gonçalves Chaves, 457 —Centro, Pelotas-RS, CEP 96015-560 Brazil, Fax: 55-53-272-3823
    • ,
  • Guilherme Brião Camacho, DDS, PhD

      Affiliations

    • Associate Professor, Department of Operative Dentistry, Federal University of Pelotas, Pelotas, Brazil
    • ,
  • John M Powers, PhD

      Affiliations

    • Director, Houston Biomaterials Research Center, University of Texas Health Science Center, Houston, Texas, USA

References 

  1. Christensen GJ. Acceptability of alternatives for conservative restoration of posterior teeth. J Esthet Dent. 1995;7:228–232
  2. Jacobsen PH, Rees JS. Luting agents for ceramic and polymeric inlays and onlays. Int Dent J. 1992;42:145–149
  3. Braga RR, Ballester RY, Carrilho MR. Pilot study on the early shear strength of porcelain-dentin bonding using dual-cure cements. J Prosthet Dent. 1999;81:285–289
  4. Braga RR, Cesar PF, Gonzaga CC. Mechanical properties of resin cements with different activation modes. J Oral Rehabil. 2002;29:257–262
  5. Hahn P, Attin T, Grofke M, Hellwig E. Influence of resin cement viscosity on microleakage of ceramic inlays. Dent Mater. 2001;17:191–196
  6. Kitasako Y, Burrow MF, Katahira N, Nikaido T, Tagami J. Shear bond strengths of three resin cements to dentine over 3 years in vitro. J Dent. 2001;29:139–144
  7. Sanares AM, Itthagarun A, King NM, Tay FR, Pashley DH. Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater. 2001;17:542–556
  8. Yanagawa T, Finger WJ. Relationship between degree of polymerization of resin composite and bond strength to Gluma-treated dentin. Am J Dent. 1994;7:157–160
  9. Nakamura T, Miyamae M, Koh N, Hino T, Maruyama T. Adhesive strength between teeth and resin cements for porcelain laminate veneer. J Osaka Univ Dent Sch. 1992;32:21–26
  10. Carvalho RM, Pereira JC, Yoshiyama M, Pashley DH. A review of polymerization contraction (the influence of stress development versus stress relief). Oper Dent. 1996;21:17–24
  11. Eick JD, Gwinnett AJ, Pashley DH, Robinson SL. Current concepts on adhesion to dentin. Crit Rev Oral Biol Med. 1997;8:306–335
  12. Kelsey WP, Triolo PT, Blankenau RJ, Kelsey MN, Ortmeier C, Hauser D. Bond strengths to enamel and dentin with indirect and direct resin composites. Am J Dent. 1996;9:105–108
  13. Nikaido T, Nakajima M, Higashi T, Kanemura N, Pereira PN, Tagami J. Shear bond strengths of a single-step bonding system to enamel and dentin. Dent Mater J. 1997;16:40–47
  14. Watanabe EK, Yamashita A, Yatani H, Ishikawa K, Suzuki K. Improvement in the tensile bond strength between resin cement and dentin surfaces after temporary cement application. Int J Prosthodont. 1998;11:203–211
  15. Phrukkanon S, Burrow MF, Tyas MJ. Effect of cross-sectional surface area on bond strengths between resin and dentin. Dent Mater. 1998;14:120–128
  16. Davies B, Dunne SM, Mokhtari M, Nicholson J. A comparison of the shear bond strength of composite resin bonded by a fourth and a fifth generation dental adhesive to bovine teeth. Prim Dent Care. 1999;6:103–106
  17. Mondragon E, Soderholm KJ. Shear strength of dentin and dentin bonded composites. J Adhes Dent. 2001;3:227–236
  18. Inoue S, Vargas MA, Abe Y, Yoshida Y, Lambrechts P, Vanherle G, et al.  Microtensile bond strength of eleven contemporary adhesives to dentin. J Adhes Dent. 2001;3:237–245
  19. Leloup G, D’Hoore W, Bouter D, Degrange M, Vreven J. Meta-analytical review of factors involved in dentin adherence. J Dent Res. 2001;80:1605–1614
  20. Della Bona A, van Noort R. Shear vs tensile bond strength of resin composite bonded to ceramic. J Dent Res. 1995;74:1591–1596
  21. Kitasako Y, Burrow MF, Nikaido T, Harada N, Inokoshi S, Yamada T, et al. Shear and tensile bond testing for resin cement evaluation. Dent Mater. 1995;1:298–304
  22. Pashley DH, Sano H, Ciucchi B, Yoshiyama M, Carvalho RM. Adhesion testing of dentin bonding agents (a review). Dent Mater. 1995;11:117–125
  23. Alster D, Feilzer AJ, De Gee AJ, Davidson CL. Tensile strength of thin resin composite layers as a function of layer thickness. J Dent Res. 1995;74:1745–1748
  24. Frankenberger R, Sindel J, Kramer N, Petschelt A. Dentin bond strength and marginal adaptation (direct composite resins vs ceramic inlays). Oper Dent. 1999;24:147–155
  25. Zheng L, Pereira PN, Nakajima M, Sano H, Tagami J. Relationship between adhesive thickness and microtensile bond strength. Oper Dent. 2001;26:97–104
  26. Versluis A, Tantbirojn D, Douglas WH. Why do shear bond tests pull out dentin?. J Dent Res. 1997;76:1298–1307
  27. Saunders WP. The shear impact retentive strengths of four dentine bonding agents to human and bovine dentine. J Dent. 1988;16:233–238
  28. Schilke R, Bauss O, Lisson JA, Schuckar M, Geurtsen W. Bovine dentin as a substitute for human dentin in shear bond strength measurements. Am J Dent. 1999;12:92–96
  29. Muench A, da Silva EM, Ballester RY. Influence of different dentinal substrates on the tensile bond strength of three adhesive systems. J Adhes Dent. 2000;2:209–212
  30. Nakamichi I, Iwaku M, Fusayama T. Bovine teeth as possible substitutes in the adhesion test. J Dent Res. 1983;62:1076–1081
  31. Oesterle LJ, Shellhart WC, Belanger GK. The use of bovine enamel in bonding studies. Am J Orthod Dentofacial Orthop. 1998;114:514–519
  32. Schilke R, Lisson JA, Bauss O, Geurtsen W. Comparison of the number and diameter of dentinal tubules in human and bovine dentine by scanning electron microscopic investigation. Arch Oral Biol. 2000;45:355–361
  33. Kells BE, Kennedy JG. Temperature and humidity (significant factors in resin/enamel bonding). Eur J Prosthodont Restor Dent. 1995;3:269–274
  34. Demarco FF, Turbino ML, Matson E. Tensile bond strength of two dentin adhesive systems. Braz Dent J. 1998;9:19–24
  35. Kitasako Y, Burrow MF, Nikaido T, Tagami J. The influence of storage solution on dentin bond durability of resin cement. Dent Mater. 2000;16:1–6
  36. Barakat MM, Powers JM. In vitro bond strength of cements to treated teeth. Aust Dent J. 1986;31:415–419
  37. Zidan O, Asmussen E, Jorgensen KD. Microscopical analysis of fractured restorative resin/etched enamel bonds. Scand J Dent Res. 1982;90:286–291
  38. Braga RR, Cesar PF, Gonzaga CC. Tensile bond strength of filled and unfilled adhesives to dentin. Am J Dent. 2000;13:73–76

PII: S0022-3913(03)00177-X

doi: 10.1016/S0022-3913(03)00177-X

Journal of Prosthetic Dentistry
Volume 89, Issue 6 , Pages 558-564 , June 2003

Article Tools