Journal of Prosthetic Dentistry
Volume 89, Issue 6 , Pages 572-578 , June 2003

Comparison of retentive systems for composites used as alternatives to porcelain in fixed partial dentures

  • Luciana Silva Andrade Tarozzo, DDS, MS

      Affiliations

    • Graduate student, Dental Material and Prosthesis Department, São Paulo, Brazil
    • ,
  • Maria da Gloria Chiarello de Mattos, DDS, MS, PhD

      Affiliations

    • Head Professor of Removable Partial Prosthesis, Dental Materials and Prosthesis Department, São Paulo, Brazil
    • Corresponding Author InformationReprint requests to: Dr Maria da Gloria Chiarello de Mattos, FORP/USP, Avenida do café s/n, 14040-904 - Ribeiráo Preto—SP, Brazil, Fax: 55-16-633-0999
    • ,
  • Ricardo Faria Ribeiro, DDS, MS, PhD

      Affiliations

    • Associate Professor of Removable Partial Prosthesis, Dental Materials and Prosthesis Department, São Paulo, Brazil
    • ,
  • Marisa Semprini, DDS, MS, PhD

      Affiliations

    • Head Professor of Anatomy, Morphology, Stomatology and Physiology Department, São Paulo, Brazil

References 

  1. Jones RM, Goodacre CJ, Moore BK, Dykema RW. A comparison of the physical properties of four prosthetic veneering materials. J Prosthet Dent. 1989;61:38–44
  2. Jones RM, Moore BK, Goodacre CJ, Munoz-Viveros CA. Microleakage and shear bond strength of resin and porcelain veneers bonded to cast alloys. J Prosthet Dent. 1991;65:221–228
  3. Lee CF, Pierpont HP, Strickler ER. The effect of bead attachment systems on casting patterns and resultant tensile bond strength of composite resin veneer cast restorations. J Prosthet Dent. 1991;66:623–630
  4. Shue SL, Nicholls JI, Townsend JD. The effect of metal retentive designs on resin veneer retention. J Prosthet Dent. 1987;58:297–305
  5. Vojvodic D, Jerolimov V, Zabarovic D, Loncar A. Bond strengths of two dental bonding systems. Mil Med. 2000;165:560–565
  6. Ishijima T, Caputo AA, Mito R. Adhesion of resin to casting alloys. J Prosthet Dent. 1992;67:445–449
  7. Caeg C, Leinfelder KF, Lacefield WR, Bell W. Effectiveness of a method used in bonding resins to metal. J Prosthet Dent. 1990;64:37–41
  8. Watanabe I, Kurtz KS, Kabcenell JL, Okabe T. Effect of sandblasting and silicoating on bond strength of polymer-glass composite to cast titanium. J Prosthet Dent. 1999;82:462–467
  9. Yap AU, Stokes AN. Resin-bonded prostheses. Quintessence Int. 1995;26:521–530
  10. Nicholls JI, Shue SL. Effect of bead spacing on the tensile bond strength of resin veneers to cast alloys. Quintessence Dent Technol. 1986;10:511–515
  11. Scott JA, Strang R, McCrosson J. Silane effects on luting resin bond to a Ni-Cr alloy. J Dent. 1991;19:373–376
  12. Hansson O. The Silicoater technique for resin-bonded prostheses (clinical and laboratory procedures). Quintessence Int. 1989;20:85–99
  13. Laufer BZ, Nicholls JI, Townsend JD. SiOx-C coating (a composite-to-metal bonding mechanism). J Prosthet Dent. 1988;60:320–327
  14. Barzilay I, Myers ML, Cooper LB, Graser GN. Mechanical and chemical retention of laboratory cured composite to metal surfaces. J Prosthet Dent. 1988;59:131–137
  15. Lüthy H, Marinello CP, Schärer P. Factors influencing metal-resin tensile bond strength to filled composites. Dent Mater. 1990;6:73–77
  16. Magneville B, Dejou J. A comparison of two methods of adhering composite to metal. J Prosthet Dent. 1996;76:97–101
  17. Vojvodic D, Predanic-Gasparac H, Brkic H, Celebic A. The bond strength of polymers and metal surfaces using the ‘silicoater’ technique. J Oral Rehabil. 1995;22:493–499
  18. Herø H, Ruyter LE, Waarli ML, Hultquist G. Adhesion of resins to Ag-Pd alloys by means of the silicoating technique. J Dent Res. 1987;66:1380–1385
  19. Ohkubo C, Watanabe I, Hosoi T, Okabe T. Shear bond strengths of polymethyl methacrylate to cast titanium and cobalt-chromium frameworks using five metal primers. J Prosthet Dent. 2000;83:50–57
  20. Cobb DS, Vargas MA, Fridrich TA, Bouschlicher MR. Metal surface treatment (characterization and effect on composite-to-metal bond strength). Oper Dent. 2000;25:427–433
  21. Matsumura H, Tanoue N, Atsuta M. Adhesive bonding of stainless steels and their component metals. J Oral Rehabil. 2000;27:1054–1059
  22. Bouschlicher MR, Cobb DS, Vargas MA. Effect of two abrasive systems on resin bonding to laboratory-processed indirect resin composite restorations. J Esthet Dent. 1999;11:185–196
  23. Kern M, Thompson VP. Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloy. Dent Mater. 1994;10:19–25
  24. Shell JS, Nielsen JP. Study of the bond between gold alloys and porcelain. J Dent Res. 1962;41:1424–1437
  25. Anthony DH, Burnett AP, Smith DL, Brooks MS. Shear test for measuring bonding in cast gold alloy-porcelain composites. J Dent Res. 1970;49:27–33
  26. Bezzon OL, de Mattos M, da G, Ribeiro RF, Rollo JM. Effect of beryllium on the castability and resistance of ceramometal bonds in nickel-chromium alloys. J Prosthet Dent. 1998;80:570–574

☆ Supported by grant no. 98/13106-0 from FAPESP. Abstract of PhD’s degree thesis presented at the Ribeirão Preto School of Dentistry, São Paulo University. Major area: Oral Rehabilitation.

PII: S0022-3913(03)00180-X

doi: 10.1016/S0022-3913(03)00180-X

Journal of Prosthetic Dentistry
Volume 89, Issue 6 , Pages 572-578 , June 2003

Article Tools

* Image Usage & Resolution