Journal of Prosthetic Dentistry
Volume 90, Issue 2 , Pages 168-174 , August 2003

The effect of thermocycling on microleakage of several commercially available composite Class V restorations in vitro

  • Fouad K Wahab, BDS, MScD, PhD

      Affiliations

    • Associate Professor of Conservative Dentistry and Dental Materials Science, Head of Department of Conservative Dentistry and Prosthodontics, University of Jordan, Amman, Jordan
    • Corresponding Author InformationReprint requests to: Dr Fouad K. Wahab, The University of Jordan, Faculty of Dentistry, Department of Conservative Dentistry and Prosthodontics, Amman, Jordan, Fax: 962 6 535 5511
    • ,
  • Firas J Shaini, BDS, MDentSc, PhD

      Affiliations

    • Assistant Professor of Conservative Dentistry and Dental Materials Science, Department of Conservative Dentistry and Prosthodontics, University of Jordan, Amman, Jordan
    • ,
  • Steven M Morgano, DMD

      Affiliations

    • Professor and Director, Division of Postdoctoral Prosthodontics, Department of Restorative Sciences and Biomaterials, Boston University, Boston, Mass., USA

References 

  1. Mazer RB, Leinfelder KF, Russell CM. Degradation of microfilled posterior composite. Dent Mater. 1992;8:185–189
  2. Willems G, Lamberchts P, Lesaffre E, Vanherle G. Three-year follow-up of posterior composites (SEM study of differential wear). J Dent. 1993;21:79–86
  3. Bayne C, Heymann O, Swift J. Update on dental composite restorations. J Am Dent Assoc. 1994;125:687–701
  4. Van Meerbeek B, Perdigao J, Lambrechts P, Vanherle G. The clinical performance of adhesives. J Dent. 1998;26:1–20
  5. Willems G, Lambrechts P, Braem M, Celis P, Vanherle G. A classification of dental composites according to their morphological and mechanical characteristics. Dent Mater. 1992;8:310–319
  6. Davidson CL, de Gee AJ, Feilzer A. The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res. 1984;63:1396–1399
  7. Puckett AD, Smith R. Method to measure the polymerization shrinkage of light-cured composites. J Prosthet Dent. 1992;68:56–58
  8. Eick JD, Welch FH. Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity. Quintessence Int. 1986;17:103–111
  9. Browne RM, Tobias RS. Microbial microleakage and pulpal inflammation (a review). Endod Dent Traumatol. 1986;2:177–183
  10. Lutz F, Krejci I, Luescher B, Oldenburg T. Improved proximal margin adaptation of Class II composite resin restorations by use of light-reflecting wedges. Quintessence Int. 1986;17:659–664
  11. Qvist V, Qvist J, Mjor IA. Placement and longevity of tooth-colored restorations in Denmark. Acta Odontol Scand. 1990;48:305–311
  12. MacInnis WA, Ismail A, Brogan H. Placement and replacement of restorations in a military population. J Can Dent Assoc. 1991;57:227–231
  13. Mjor IA, Jokstad A. Five-year study of Class II restorations in permanent teeth using amalgam, glass polyalkenoate (ionomer) cement and resin-based composite materials. J Dent. 1993;21:338–343
  14. Friedl KH, Hiller KA, Schmalz G. Placement and replacement of composite restorations in Germany. Oper Dent. 1995;20:34–38
  15. Applequist EA, Meiers JC. Effect of bulk insertion, prepolymerized resin composite balls, and beta-quartz inserts on microleakage of Class V resin composite restorations. Quintessence Int. 1996;27:253–258
  16. Hakimeh S, Vaidyanathan J, Houpt ML, Vaidyanathan TK, Von Hagen S. Microleakage of compomer Class V restorations (effect of load cycling, thermal cycling, and cavity shape differences). J Prosthet Dent. 2000;83:194–203
  17. Geis-Gerstorfer J. In vitro corrosion measurements of dental alloys. J Dent. 1994;22:247–251
  18. Joyston-Bechal A, Kidd E, Joyston-Bechal S. In: Essentials of dental caries (the disease and its management). 2nd ed. Oxford: Oxford University Press; 1998;p. 66–78
  19. Versluis A, Douglas WH, Sakaguchi RL. Thermal expansion coefficient of dental composites measured with strain gauges. Dent Mater. 1996;12:290–294
  20. McCabe JF, Walls AW. Properties used to characterize materials. In: Applied dental materials. 8th ed. Oxford: Blackwell Science; 1998. p. 4-28
  21. Olmez A, Oztas N, Bilici S. Microleakage of resin composite restorations with glass-ceramic inserts. Quintessence Int. 1998;29:725–729
  22. Helvatjoglou-Antoniades M, Theodoridou-Pahini S, Papadogiannis Y, Karezis A. Microleakage of bonded amalgam restorations (effect of thermal cycling). Oper Dent. 2000;25:316–323
  23. Barclay CW, Boyle EL, Williams R, Marquis PM. The effect of thermocycling on five adhesive luting cements. J Oral Rehabil. 2002;29:546–552
  24. Tanaka T, Kamada K, Matsumura H, Atsuta M. A comparison of water temperatures for thermocyling of metal-bonded resin specimens. J Prosthet Dent. 1995;74:345–349
  25. Dubois RJ, Kyriakakis P, Weiner S, Vaidyanathan TK. Effects of occlusal loading and thermocycling on the marginal gaps of light-polymerized and autopolymerized resin provisional crowns. J Prosthet Dent. 1999;82:161–166
  26. Yap AUJ, Wee KEC, Teoh SH, Chew CL. Influence of thermal cycling on OCA wear of composite restoratives. Oper Dent. 2001;26:349–356
  27. Owens BM, Halter TK, Brown DM. Microleakage of tooth-colored restorations with a beveled gingival margin. Quintessence Int. 1998;29:356–361
  28. Jang KT, Chung DH, Shin D, Garcia-Godoy F. Effect of eccentric load cycling on microleakage of Class V flowable and packable composite resin restorations. Oper Dent. 2001;26:603–608
  29. Lucena-Martin C, Gonzalez-Rodriguez MP, Ferrer-Luque CM, Robles-Gijon V, Navajas JM. Influence of time and thermocycling on marginal sealing of several dentin adhesive systems. Oper Dent. 2001;26:550–555
  30. Manhart J, Chen HY, Mehl A, Weber K, Hickel R. Marginal quality and microleakage of adhesive Class V restorations. J Dent. 2001;29:123–130
  31. von Fraunhofer JA, Adachi EI, Barnes DM, Romberg E. The effect of tooth preparation on microleakage behavior. Oper Dent. 2000;25:526–533
  32. Cooley RL, Barkmeier WW. Dentinal shear bond strength, microleakage, and contraction gap of visible light-polymerized liners/bases. Quintessence Int. 1991;22:467–474
  33. Hilton TJ, Schwartz RS, Ferracane JL. Microleakage of four Class II resin composite insertion techniques at intraoral temperature. Quintessence Int. 1997;28:135–144
  34. Meiers JC, Kazemi R, Meiers CD. Microleakage of packable composite resins. Oper Dent. 2001;26:121–126
  35. Feilzer AJ, de Gee AJ, Davidson CL. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res. 1987;66:1636–1639
  36. Tung FF, Estafan D, Scherer W. Microleakage of a condensable resin composite (an in-vitro investigation). Quintessence Int. 2000;31:430–434

☆ Supported by research grant 34/98-99 from Faculty of Scientific Research, University of Jordan, Amman, Jordan.

PII: S0022-3913(03)00300-7

doi: 10.1016/S0022-3913(03)00300-7

Journal of Prosthetic Dentistry
Volume 90, Issue 2 , Pages 168-174 , August 2003

Article Tools

* Image Usage & Resolution