Journal of Prosthetic Dentistry
Volume 90, Issue 2 , Pages 175-183 , August 2003

An in vitro comparison of tensile bond strengths of noble and base metal alloys to enamel

This paper was presented at the International Association of Dental Research in San Diego, Calif., March 2002. This paper is submitted in partial fulfillment of the requirements for the Master of Science degree in Biomaterials and Biomimetics, New York University, College of Dentistry, New York, NY, August 2001.

  • Roya Zand Parsa, DDS, MSc

      Affiliations

    • Assistant Professor, Department of Restorative Dentistry, Prosthodontics Division, Tufts University, School of Dental Medicine, Boston, Mass, USA
    • Corresponding Author InformationReprint requests to: Dr Roya Zand Parsa, PO Box 1294, Brookline, MA 02446, USA, Fax: 617-636-6583
    • ,
  • Gary R Goldstein, DDS

      Affiliations

    • Professor and Director, Advanced Education Program in Prosthodontics, New York University, College of Dentistry, New York, NY, USA
    • ,
  • Gerald M Barrack, DDS

      Affiliations

    • Clinical Professor, Advanced Education Program in Prosthodontics, New York University, College of Dentistry, New York, NY, USA
    • ,
  • Racquel Z LeGeros, PhD

      Affiliations

    • Professor, Department of Biomaterials and Biomimetics, New York University, College of Dentistry, New York, NY, USA

References 

  1. Thompson VP, Del-Castillo E, Livaditis GJ. Resin bonded retainers. Part I. Resin bond to electrolytically etched non-precious alloys. J Prosthet Dent. 1983;50:771–779
  2. Rochette AL. Attachment of a splint to enamel of lower anterior teeth. J Prosthet Dent. 1973;30:418–423
  3. Livaditis GJ, Thompson VP. Etched casting (an improved retentive mechanism for resin-bonded retainers). J Prosthet Dent. 1982;47:52–58
  4. Watanabe F, Powers JM, Lorey RE. In vitro bonding of prosthodontic adhesives to dental alloys. J Dent Res. 1988;67:479–483
  5. Wiltshire WA, Ferreira MR. A classification of resin-bonded bridges based on the evolutionary changes of the different technique types. Quintessence Dent Technol. 1987;11:253–258
  6. O’Connor RP, Nayyar A, Kovarik RE. Effect of internal microblasting on retention of cemented cast crowns. J Prosthet Dent. 1990;64:557–562
  7. McLaughlin GT, Rochette AL, Sossamon J. Direct bonded retainers: the advanced alternative. Philadelphia: J.B. Lippincott; 1986; p. 117–52
  8. Inoue K, Murakami T, Terada Y. The bond strength of porcelain to Ni-Cr alloy—the influence of tin or chromium plating. Int J Prosthodont. 1992;5:262–268
  9. Degrange M, Roulet JF. Minimally invasive restorations with bonding. Carol Stream (IL): Quintessence; 1997. p. 161-8
  10. Taira Y, Yanagida H, Matsumura H, Yoshida K, Atsuta M, Suzuki S. Adhesive bonding of titanium with a thione-phosphate dual functional primer and self-curing luting agents. Eur J Oral Sci. 2000;108:456–460
  11. Gates WD, Diaz-Arnold AM, Aquilino SA, Ryther JS. Comparison of the adhesive strengths of a BIS-GMA cement to tin-plated and non–tin-plated alloys. J Prosthet Dent. 1993;69:12–16
  12. Imbery TA, Burgess JO, Naylor WP. Tensile strength of three resin cements following two alloy surface treatments. Int J Prosthodont. 1992;5:59–67
  13. Lynde TA, Whitehill JM, Coffey JP, Meiers JC. The bond strength of an adhesive resin luting cement to a variety of surface treatments of a high-palladium copper alloy. J Prosthodont. 1996;5:295–300
  14. Stoknorm R, Isidor F, Ravnholt G. Tensile bond strength of resin luting cement to a porcelain-fusing noble alloy. Int J Prosthodont. 1996;9:323–330
  15. Rubo JH, Pegoraro LF, Ferreira PM. A comparison of tensile bond strength of resin-retained prostheses made using five alloys. Int J Prosthodont. 1996;9:277–281
  16. Creugers NH, Welle PR, Vrijhoef MM. Four bonding systems for resin-retained cast metal prostheses. Dent Mater. 1988;4:85–88
  17. Garcia-Godoy F, Kaiser DA, Malone WF, Hubbard G. Shear bond strength of two resin adhesives for acid-etched metal prostheses. J Prosthet Dent. 1991;65:787–789
  18. Tanaka T, Hirano M, Kawahara M, Matsumura H, Atsuta M. A new ion-coating surface treatment of alloys for dental adhesive resins. J Dent Res. 1988;67:1376–1380
  19. Watanabe F, Powers JM, Lorey RE. In vitro bonding of prosthodontic adhesives to dental alloys. J Dent Res. 1988;67:479–483
  20. Imbery TA, Davis RD. Evaluation of tin-plating systems for a high-noble alloy. Int J Prosthodont. 1993;6:55–60
  21. Ayad MF, Rosenstiel SF. Preliminary evaluation of tin-plating for extracoronal restorations (evaluation of marginal quality and retention). Int J Prosthodont. 1998;11:44–48
  22. Ogunyinka A. A simple method of increasing the adhesion between resinous cements and tinplated gold alloy (a pilot study). J Prosthet Dent. 1998;80:302–306
  23. Antoniadou M, Kern M, Strub JR. Effect of a new metal primer on the bond strength between a resin cement and two high-noble alloys. J Prosthet Dent. 2000;84:554–560

PII: S0022-3913(03)00411-6

doi: 10.1016/S0022-3913(03)00411-6

Journal of Prosthetic Dentistry
Volume 90, Issue 2 , Pages 175-183 , August 2003

Article Tools

* Image Usage & Resolution