Journal of Prosthetic Dentistry
Volume 90, Issue 5 , Pages 459-464 , November 2003

In vitro marginal fit of three all-ceramic crown systems

  • In-Sung Yeo, DDS, MSD

      Affiliations

    • Graduate Student and Resident, Department of Prosthodontics, Seoul, South Korea
    • ,
  • Jae-Ho Yang, DDS, MSD, PhD

      Affiliations

    • Professor, Department of Prosthodontics, Seoul, South Korea
    • Corresponding Author InformationReprint requests to: Dr Jae-Ho Yang, Department of Prosthodontics, Seoul National University Dental Hospital, 28 Yonkon-dong, Chongro-gu, Seoul, South Korea, Fax: 82-2-760-3860
    • ,
  • Jai-Bong Lee, DDS, MSD, PhD

      Affiliations

    • Assistant Professor, Department of Prosthodontics, Seoul, South Korea

References 

  1. Sorensen JA. A rationale for comparison of plaque-retaining properties of crown systems. J Prosthet Dent. 1989;62:264–269
  2. Sorensen SE, Larsen IB, Jorgensen KD. Gingival and alveolar bone reaction to marginal fit of subgingival crown margins. Scand J Dent Res. 1986;94:109–114
  3. Beschnidt SM, Strub JR. Evaluation of the marginal accuracy of different all-ceramic crown systems after simulation in the artificial mouth. J Oral Rehabil. 1999;26:582–593
  4. May KB, Russell MM, Razzoog ME, Lang BR. Precision of fit (the Procera AllCeram crown). J Prosthet Dent. 1998;80:394–404
  5. Leong D, Chai J, Lautenschlager E, Gilbert J. Marginal fit of machine-milled titanium and cast titanium single crowns. Int J Prosthodont. 1994;7:440–447
  6. Schaerer P, Sato T, Wohlwend A. A comparison of the marginal fit of three cast ceramic crown systems. J Prosthet Dent. 1988;59:534–542
  7. Oruc S, Tulunoglu Y. Fit of titanium and a base metal alloy metal-ceramic crown. J Prosthet Dent. 2000;83:314–318
  8. Vahidi F, Egloff ET, Panno FV. Evaluation of marginal adaptation of all-ceramic crowns and metal ceramic crowns. J Prosthet Dent. 1991;66:426–431
  9. Karlsson S. The fit of Procera titanium crowns. An in vitro and clinical study. Acta Odontol Scand. 1993;51:129–134
  10. Groten M, Girthofer S, Probster L. Marginal fit consistency of copy-milled all-ceramic crowns during fabrication by light and scanning electron microscopic analysis in vitro. J Oral Rehabil. 1997;24:871–881
  11. Hung SH, Hung KS, Eick DJ, Chappell RP. Marginal fit of porcelain-fused-to-metal and two types of ceramic crown. J Prosthet Dent. 1990;63:26–31
  12. Cooney JP, Richter WA, MacEntee MI. Evaluation of ceramic margins for metal-ceramic restorations. J Prosthet Dent. 1985;54:1–5
  13. Holmes JR, Sulik WD, Holland GA, Bayne SC. Marginal fit of castable ceramic crowns. J Prosthet Dent. 1992;67:594–599
  14. Rinke S, Huls A, Jahn L. Marginal accuracy and fracture strength of conventional and copy-milled all-ceramic crowns. Int J Prosthodont. 1995;8:303–310
  15. Blackman R, Baez R, Barghi N. Marginal accuracy and geometry of cast titanium copings. J Prosthet Dent. 1992;67:435–440
  16. Keith SE, Miller BH, Woody RD, Higginbottom FL. Marginal discrepancy of screw-retained and cemented metal-ceramic crowns on implant abutments. Int J Oral Maxillofac Implants. 1999;14:369–378
  17. Morris HF. Department of Veterans Affairs Cooperative Studies Project No. 242. Quantitative and qualitative evaluation of the marginal fit of cast ceramic, porcelain-shoulder, and cast metal full crown margins. Participants of CSP No. 147/242. J Prosthet Dent. 1992;67:198–204
  18. Tjan AH, Li T, Logan GI, Baum L. Marginal accuracy of complete crowns made from alternative casting alloys. J Prosthet Dent. 1991;66:157–164
  19. Sulaiman F, Chai J, Jameson LM, Wozniak WT. A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera Crowns. Int J Prosthodont. 1997;10:478–484
  20. Omar R. Scanning electron microscopy of the marginal fit of ceramometal restorations with facially butted porcelain margins. J Prosthet Dent. 1987;58:13–19
  21. Duncan JD. The casting accuracy of nickel-chromium alloys for fixed prostheses. J Prosthet Dent. 1982;47:63–68
  22. Chao LL. In: Statistics (methods and analysis). 2nd ed. Tokyo: McGraw-Hill; 1974;p. 436–437
  23. Groten M, Axmann D, Probster L, Weber H. Determination of the minimum number of marginal gap measurements required for practical in vitro testing. J Prosthet Dent. 2000;83:40–49
  24. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures (a laboratory study). Int J Prosthodont. 2001;14:231–238
  25. Molin M, Karlsson S. The fit of gold inlays and three ceramic inlay systems. A clinical and in vitro study. Acta Odontol Scand. 1993;51:201–206
  26. Trushkowsky RD. Ceramic inlay fabrication with three-dimensional copy milling technology. Celay. Compend Contin Educ Dent. 1998;19:1077–1080 1082-4, passim; quiz, 1086
  27. Hwang JW, Yang JH. Fracture strength of copy-milled and conventional In-Ceram crowns. J Oral Rehabil. 2001;28:678–683
  28. Shearer B, Gough MB, Setchell DJ. Influence of marginal configuration and porcelain addition on the fit of In-Ceram crowns. Biomaterials. 1996;17:1891–1895
  29. Syu JZ, Byrne G, Laub LW, Land MF. Influence of finish-line geometry on the fit of crowns. Int J Prosthodont. 1993;6:25–30
  30. Goodacre CJ, Campagni WV, Aquilino SA. Tooth preparations for complete crowns (an art form based on scientific principles). J Prosthet Dent. 2001;85:363–376
  31. Hunter AJ, Hunter AR. Gingival margins for crowns (a review and discussion. Part II: discrepancies and configurations). J Prosthet Dent. 1990;64:636–642
  32. McLean JW, von Fraunhofer JA. The estimation of cement film thickness by an in vivo technique. Br Dent J. 1971;131:107–111
  33. Grey NJ, Piddock V, Wilson MA. In vitro comparison of conventional crowns and a new all-ceramic system. J Dent. 1993;21:47–51

PII: S0022-3913(03)00586-9

doi: 10.1016/j.prosdent.2003.08.005

Journal of Prosthetic Dentistry
Volume 90, Issue 5 , Pages 459-464 , November 2003

Article Tools

* Image Usage & Resolution