Journal of Prosthetic Dentistry
Volume 90, Issue 5 , Pages 434-440 , November 2003

Evaluation of dental arch reproduction using three-dimensional optical digitization

This article was presented at the Hinman Student Research Symposium, Memphis, Tenn, October 25-27, 2002.

  • M.E Brosky, DMD

      Affiliations

    • Assistant Professor, Division of Prosthodontics, Department of Restorative Sciences, University of Minnesota, Minneapolis, Minn, USA
    • Corresponding Author InformationReprint requests to: Dr Mary Elizabeth Brosky, University of Minnesota, 9-450 Moos Tower, Minneapolis, MN 55455, USA, Fax: 612-626-1496
    • ,
  • R.J Major, BA

      Affiliations

    • Dental student, Summer Research Fellowship Program, University of Minnesota, Minneapolis, Minn, USA
    • ,
  • R DeLong, DDS, PhD

      Affiliations

    • Professor, Department of Oral Sciences. Minnesota Dental Research Center for Biomaterials and Biomechanics, University of Minnesota, Minneapolis, Minn, USA
    • ,
  • J.S Hodges, PhD

      Affiliations

    • Senior Research Associate, Division of Biostatistics, University of Minnesota, Minneapolis, Minn, USA

References 

  1. Reisbick MH, Matyas J. The accuracy of highly filled elastomeric impression materials. J Prosthet Dent. 1975;33:67–72
  2. Lacy AM, Fukui H, Bellman T, Jendresen MD. Time-dependent accuracy of elastomeric impression materials. Part II (polyether, polysulfides, and polyvinylsiloxane). J Prosthet Dent. 1981;45:329–333
  3. American Dental Association . Vinyl polysiloxane impression materials (a status report. Council of Dental Materials, Instruments and Equipment). J Am Dent Assoc. 1990;120:595–596 -600
  4. Eames WB, Sieweke JC, Wallace SW, Rogers LB. Elastomeric impression materials (effect of bulk on accuracy). J Prosthet Dent. 1979;41:304–307
  5. Johnson GH, Craig RG. Accuracy of four types of rubber impression materials compared with time of pour and a repeat pour of models. J Prosthet Dent. 1985;53:484–490
  6. Gordon GE, Johnson GH, Drennon DG. The effect of tray selection on the accuracy of elastomeric impression materials. J Prosthet Dent. 1990;63:12–15
  7. Rueda LJ, Sy-Munoz JT, Naylor WP, Goodacre CJ, Swartz ML. The effect of using custom or stock trays on the accuracy of gypsum casts. Int J Prosthodont. 1996;9:367–373
  8. Boulton JL, Gage JP, Vincent PF, Basford KE. A laboratory study of dimensional changes for three elastomeric impression materials using custom and stock trays. Aust Dent J. 1996;4:398–404
  9. Millstein P, Maya A, Segura C. Determining the accuracy of stock and custom tray impression/casts. J Oral Rehabil. 1998;25:645–648
  10. Martinez LJ, von Fraunhofer JA. The effects of custom tray material on the accuracy of master casts. J Prosthodont. 1998;7:106–110
  11. Nissan J, Laufer BZ, Brosh T, Assif D. Accuracy of three polyvinyl siloxane putty-wash impression techniques. J Prosthet Dent. 2000;83:161–165
  12. Johnson GH, Craig RG. Accuracy of addition silicones as a function of technique. J Prosthet Dent. 1986;55:197–203
  13. Saunders WP, Sharkey SW, Smith GM, Taylor WG. Effect of impression tray design upon the accuracy of stone casts produced from a single-phase medium-bodied polyvinyl siloxane impression material. J Dent. 1992;20:189–192
  14. Thongthammachat S, Moore K, Barco MT, Hovijitra S, Brown DT, Andres CJ. Dimensional accuracy of dental casts (influence of tray material, impression material, and time). J Prosthodont. 2002;11:98–108
  15. Brosky ME, Pesun IJ, Lowder PD, DeLong R, Hodges JS. Laser digitization of casts to determine the effect of tray selection and formation technique on accuracy. J Prosthet Dent. 2002;87:204–209
  16. Davis DR, Preble JS. Accuracy of a hydrophilic irreversible hydrocolloid/silicone impression material. J Prosthet Dent. 1986;55:304–308
  17. Valderhaug J, Floystrand F. Dimensional stability of elastomeric impression materials in custom-made and stock trays. J Prosthet Dent. 1984;52:514–517
  18. Mendez AJ. The influence of impression trays on the accuracy of stone casts poured from irreversible hydrocolloid impressions. J Prosthet Dent. 1985;54:383–388
  19. Woodward JD, Morris JC, Kahn Z. Accuracy of stone cast produced by perforated trays and nonperforated trays. J Prosthet Dent. 1985;53:347–350
  20. Saunders WP, Sharkey SW, Smith GM, Taylor WG. Effect of impression tray design and impression technique upon the accuracy of stone casts produced from a putt-wash polyvinyl siloxane impression material. J Dent. 1991;19:283–289
  21. Linke BA, Nicholls JI, Faucher RR. Distortion analysis of stone casts made from impression materials. J Prosthet Dent. 1985;54:794–802
  22. Quick DC, Holtan JR. Use of a scanning laser three-dimensional digitizer for analysis of dental materials. Biomed Instrum Technol. 1991;25:60–67
  23. Quick DC, Holtan JR, Ross GK. Use of a scanning laser three-dimensional digitizer to evaluate dimensional accuracy of dental impression materials. J Prosthet Dent. 1992;68:229–235
  24. Lautenschlager EP, Miyamoto P, Hilton R. Elastic recovery of polysulfide base impressions. J Dent Res. 1972;51:773–779
  25. deAraujo PA, Jorgensen KD. Effect of material bulk and undercuts on the accuracy of impression materials. J Prosthet Dent. 1985;54:791–794
  26. Anusavice KJ. Phillips' science of dental materials. In: 10th ed. St Louis: Elsevier; 1996;p. 170
  27. Rudd KD, Morrow RM, Bange AA. Accurate casts. J Prosthet Dent. 1969;21:545–554
  28. Kaiser DA, Nicholls JI. A study of distortion and surface hardness of improved artificial stone casts. J Prosthet Dent. 1976;36:373–381
  29. Shillingburg HT, Sumiya H, Whitsett L, Brackett S, Hobo S. Fundamentals of fixed prosthodontics. In: 3rd ed.. Chicago: Quintessence; 1997;p. 311
  30. Tuit CM, Rosen M, Cohen J, Becker PJ. Effect of impression technique and multiple pours on accuracy of stone models. J Dent Assoc S Afr. 1991;46:515–518
  31. Dastane A, Vaidyanathan TK, Vaidyanathan J, Mehra R, Hesby R. Development and evaluation of a new 3-D digitization and computer graphic system to study the anatomic tissue and restoration surfaces. J Oral Rehabil. 1996;23:25–34
  32. Mehl A, Gloger W, Kunzelmann KH, Hickel R. A new optical 3-D device for the detection of wear. J Dent Res. 1997;76:1799–1807
  33. Studer SP, Sourlier D, Wegmann U, Scharer P, Rees TD. Quantitative measurement of volume changes induced by oral plastic surgery (validation of an optical method using different geometrically-formed specimens). J Periodontol. 1997;68:950–962
  34. Mayhall JT, Kageyama I. A new, three-dimensional method for determining tooth wear. Am J Phys Anthropol. 1997;103:463–469
  35. DeLong R, Heizen M, Hodges JS, Ko CC, Douglas WH. Accuracy of a system for creating 3D computer models of dental tissues. J Dent Res. 2003;82:438–442

☆ Research for this article was supported in part by The University of Minnesota School of Dentistry Summer Research Fellowship Program NIH/5T35-DE07098-19, 2R44DE11638 and NIH/NIDCR Grant P30-DE12225 and The Minnesota Research Center for Biomaterials and Biomechanics.

PII: S0022-3913(03)00592-4

doi: 10.1016/j.prosdent.2003.08.021

Journal of Prosthetic Dentistry
Volume 90, Issue 5 , Pages 434-440 , November 2003

Article Tools

* Image Usage & Resolution