Journal of Prosthetic Dentistry
Volume 91, Issue 3 , Pages 247-252 , March 2004

Fracture strength of all-ceramic crowns luted using two bonding methods

  • Ahmed Attia, MScD, PhD

      Affiliations

    • Lecturer, Department of Conservative Dentistry and Fixed Prosthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Egypt. Former Visiting Research Assistant Lecturer, Department of Prosthodontics, Propaedeutics and Dental Materials, School of Dentistry, Christian-Albrechts University at Kiel, Kiel, Germany
    • Corresponding Author InformationReprint requests to: Dr Ahmed Attia Abo El-Naga, Department of Conservative Dentistry and Fixed Prosthodontics, Faculty of Dentistry, Mansoura University, Mansoura, Egypt, Fax: 002-050-226-0173
    • ,
  • Matthias Kern, DMD, PhD

      Affiliations

    • Professor and Chair, Department of Prosthodontics, Propaedeutics and Dental Materials, School of Dentistry, Christian-Albrechts University at Kiel, Kiel, Germany

References 

  1. Cronin RJ, Cagna DR. An update on fixed prosthodontics. J Am Dent Assoc. 1997;128:425–436
  2. Burke EJ, Qualtrough AJ. Aesthetic inlays. Composite or ceramic. Br Dent J. 1994;22:53–60
  3. Ferrari M, Cagidiaco MC, Vichi A, Mannocci F, Mason PN, Mjor IA. Bonding of all-porcelain crowns: structural characteristics of the substrate. Dent Mater. 2001;17:156–164
  4. Cattell MJ, Chadwick TC, Knowles JC, Clarke RL, Lynch E. Flexural strength optimization of a leucite reinforced glass ceramic. Dent Mater. 2001;17:21–33
  5. Vichi A, Ferrari M, Davidson CL. Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent. 2000;83:412–417
  6. Wiedhahn K. Cerec 3 as the first step in digitizing the dental office. Int J Comput Dent. 2000;3:67–71
  7. Kassak H. Cerec 3 in the practice network. Int J Comput Dent. 2000;3:73–77
  8. Kamada K, Yoshida K, Atsuta M. Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent. 1998;79:508–513
  9. Morikawa T, Matsumura H, Alsuta M. Bonding of a mica-based castable ceramic material with a tri-n-butylborane-initiated adhesive resin. J Oral Rehabil. 1996;23:450–455
  10. Aida M, Hayakawa T, Mizokawa K. Adhesion of composite to porcelain with various surface conditions. J Prosthet Dent. 1995;73:464–470
  11. Wolf DM, Powers JM, O'Keefe KL. Bond strength of composite to porcelain treated with new porcelain repair agents. J Dent Mater. 1992;8:158–161
  12. Stangel I, Nathanson D, Hsu CS. Shear strength of the composite bond to etched porcelain. J Dent Res. 1987;66:1460–1465
  13. Kamada K, Yoshida K, Atsuta M. Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent. 1998;79:508–513
  14. Fan PL. Porcelain repair materials. Council on dental materials instruments and equipments. J Am Dent Assoc. 1991;122:124–130
  15. Diaz-Arnold AM, Vargas MA, Haselton DR. Current status of luting agents for fixed prosthodontics. J Prosthet Dent. 1999;81:135–141
  16. Kao E, Johnston WM. Fracture incidence on debonding of orthodontic brackets from porcelain veneer laminates. J Prosthet Dent. 1999;66:631–637
  17. Yoshinari M, Derand T. Fracture strength of all-ceramic crowns. Int J Prosthodont. 1994;7:329–338
  18. Strub JR, Beschnidt M. Fracture strength of 5 different all-ceramic crown systems. Int J Prosthodont. 1998;11:602–609
  19. Chen HY, Hickel R, Setcos JC, Kunzelmann KH. Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed ceramic crowns. J Prosthet Dent. 1999;82:468–475
  20. Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 1999;81:652–661
  21. Matsumura H, Kato H, Atusta M. Shear bond strength to feldspathic porcelain of two luting cements in combination with three surface treatments. J Prosthet Dent. 1997;78:511–517
  22. Morikawa T, Matsumura H, Atusta M. Bonding of a mica-based castable ceramic material with a tri-n-butylborane–initiated adhesive resin. J Oral Rehabil. 1996;23:450–455
  23. Magne P, Oh WS, Pintado MR, Delong R. Wear of enamel and veneering ceramics after laboratory and chairside finishing procedures. J Prosthet Dent. 1999;82:669–679
  24. Palin WM, Fleming GJ, Marquis PM. An evaluation of the technique sensitivity of a hydrothermal low fusing dental ceramic. J Dent. 2001;29:443–449
  25. Neuman P. CAD/CAM-Ceramics. An overview for the Cerec practioner. Int J Comput Dent. 1999;2:45–57
  26. Thompson JY, Bayne SC, Heymann HO. Mechanical properties of a new mica-based machinable glass ceramic for CAD/CAM restorations. J Prosthet Dent. 1996;76:619–623
  27. Mormann WH, Bindl A. The Cerec 3. A quantum leap for computer-aided restorations: initial clinical results. Quintessence Int. 2000;31:699–712
  28. Koutayas SO, Kern M, Ferraresso F, Strub JR. Influence of design and mode of loading on the fracture strength of all-ceramic resin-bonded fixed partial dentures: an in vitro study in a dual-axis chewing simulator. J Prosthet Dent. 2000;83:540–547
  29. Sjogern G. Marginal and internal fit of four different types of ceramic inlays after luting. Acta Odontol Scand. 1995;53:24–28
  30. Burke FJ. The effect of variations in bonding procedures on fracture resistance of dentin- bonded all-ceramic crowns. Quintessence Int. 1995;26:293–300

☆ Presented at the 79th IADR General Session, Chiba, Tokyo, Japan, June 2001.This project was supported by the Egyptian Ministry of Higher Education.

PII: S0022-3913(03)00849-7

doi: 10.1016/j.prosdent.2003.12.005

Journal of Prosthetic Dentistry
Volume 91, Issue 3 , Pages 247-252 , March 2004

Article Tools