Journal of Prosthetic Dentistry
Volume 92, Issue 4 , Pages 348-353 , October 2004

Thermo-hydrolytic stability of core foundation and restorative composites

  • Mansuang Arksornnukit, DDS, MS

      Affiliations

    • Assistant Professor, Department of Prosthodontics, Faculty of Dentistry, Chulalongkorn University, Bangkok Thailand
    • Corresponding Author InformationReprint requests to: Dr Mansuang Arksornnukit Chulalongkorn Universtiy Department of Prosthodontics, Faculty of Dentistry 34 Henri-Dunant Rd. Bangkok, 10330 THAILAND Fax: 66-2-218-8534
    • ,
  • Hidekazu Takahashi, DDS, PhD

      Affiliations

    • Associate Professor, Advanced Biomaterials, Department of Restorative Sciences, Division of Oral Health Sciences, Graduate School, Tokyo Medical and Dental University, Tokyo Japan

References 

  1. Reeh ES, Messer HH, Douglas WH. Reduction in tooth stiffness as a result of endodontic and restorative procedures. J Endod. 1989;15:512–516
  2. Sornkul E, Stannard JG. Strength of roots before and after endodontic treatment and restoration. J Endod. 1992;18:440–443
  3. Cho GC, Kaneko LM, Donovan TE, White SN. Diametral and compressive strength of dental core materials. J Prosthet Dent. 1999;82:272–276
  4. Combe EC, Shaglouf AM, Watts DC, Wilson NH. Mechanical properties of direct core build-up materials. Dent Mater. 1999;15:158–165
  5. Pilo R, Cardash HS, Levin E, Assif D. Effect of core stiffness on the in vitro fracture of crowned, endodontically treated teeth. J Prosthet Dent. 2002;88:302–306
  6. Asmussen E, Peutzfeldt A. Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater. 1998;14:51–56
  7. Li Y, Swartz ML, Phillips RW, Moore BK, Roberts TA. Effect of filler content and size on properties of composites. J Dent Res. 1985;64:1396–1401
  8. Braem M, Finger W, Van Doren VE, Lambrechts P, Vanherle G. Mechanical properties and filler fraction of dental composites. Dent Mater. 1989;5:346–348
  9. Mohsen NM, Craig RG. Effect of silanation of fillers on their dispersability by monomer systems. J Oral Rehabil. 1995;22:183–189
  10. In:  Annusavice KJ,  Phillips RW editor. Phillips' science of dental materials. 11th ed.. St Louis: Elsevier; 2003;p. 85–86 100-1
  11. Callister WD. Fundamentals of material science and engineering. 5th ed.. New York: John Wiley & Sons; 2001; p. 171
  12. Shackelford JF. Introduction to materials science for engineers. 5th ed.. Upper Saddle River: Pearson Education; 1999; p. 205
  13. Bagis YH, Rueggeberg FA. Effect of post-cure temperature and heat duration on monomer conversion of photo-activated dental resin composite. Dent Mater. 1997;13:228–232
  14. Lovell LG, Newman SM, Bowman CN. The effects of light intensity, temperature, and comonomer composition on the polymerization behavior of dimethacrylate dental resins. J Dent Res. 1999;78:1469–1476
  15. ISO 4049: Dental resin-based restorative materials. Geneva: International Organization for Standardization; 2000;
  16. O' Brien WJ. Dental materials and their selection. 3rd ed.. Chicago: Quintessence; 2002; p. 330-4
  17. Manhart J, Kunzelmann KH, Chen HY, Hickel R. Mechanical properties of new composite restorative materials. J Biomed Mater Res. 2000;53:353–361
  18. Yamamoto M, Takahashi H. Tensile fatigue strength of light cure composite resins for posterior teeth. Dent Mater J. 1995;14:175–184
  19. Arikawa H, Kuwahata H, Seki H, Kanie T, Fujii K, Inoue K. Deterioration of mechanical properties of composite resins. Dent Mater J. 1995;14:78–83
  20. Calais JG, Soderholm KJ. Influence of filler type and water exposure on flexural strength of experimental composite resins. J Dent Res. 1988;67:836–840
  21. Tarumi H, Torii M, Tsuchitani Y. Relationship between particle size of barium glass filler and water sorption of light-cured composite resin. Dent Mater J. 1995;14:37–44
  22. Vijayaraghavan TV, Hsiao J. Flexural behavior of visible light-cured composites as function of temperature under water immersion test conditions. Dent Mater. 1994;10:347–352
  23. Ferracane JL, Marker VA. Solvent degradation and reduced fracture toughness in aged composites. J Dent Res. 1992;71:13–19
  24. Manhart J, Kunzelmann KH, Chen HY, Hickel R. Mechanical properties and wear behavior of light-cured packable composite resins. Dent Mater. 2000;16:33–40
  25. Santerre JP, Shajii L, Tsang H. Biodegradation of commercial dental composite by cholesterol esterase. J Dent Res. 1999;78:1459–1468
  26. Shin MA, Drummond JL. Evaluation of chemical and mechanical properties of dental composites. J Biomed Mater Res. 1999;48:540–545
  27. Mohsen NM, Craig RG. Hydrolytic stability of silanated zirconia-silica-urethane dimethacrylate composites. J Oral Rehabil. 1995;22:213–220
  28. Scherrer SS, de Rijk WG. The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont. 1993;6:462–467
  29. Stanford JW, Weigel KV, Paffenbarger GC, Sweeney WT. Compressive properties of hard tooth tissues and some restorative materials. J Am Dent Assoc. 1960;60:746–756
  30. Jantarat J, Palamara JE, Lindner C, Messer HH. Time-dependent properties of human root dentin. Dent Mater. 2002;18:486–493
  31. Watts DC. Elastic moduli and visco-elastic relaxation. J Dent. 1994;22:154–158
  32. Craig RG. Restorative dental materials. 11th ed.. St. Louis: Elsevier; 2002; p. 87-8

PII: S0022-3913(04)00340-3

doi: 10.1016/j.prosdent.2004.05.009

Journal of Prosthetic Dentistry
Volume 92, Issue 4 , Pages 348-353 , October 2004

Article Tools

* Image Usage & Resolution