Journal of Prosthetic Dentistry
Volume 93, Issue 2 , Pages 148-152 , February 2005

Comparative tensile strengths of preceramic and postceramic solder connectors using high-palladium alloy

  • Abdul-Hadi Shehab, DDS

      Affiliations

    • Graduate Student, Graduate Prosthodontics, Department of Prosthodontics
    • ,
  • Maria Pappas, DMD

      Affiliations

    • Graduate Student, Graduate Prosthodontics, Department of Prosthodontics
    • ,
  • David R. Burns, DMD

      Affiliations

    • Professor and Director, Graduate Prosthodontics, Department of Prosthodontics
    • Corresponding Author InformationReprint requests to: Dr David R. Burns, Department of Prosthodontics, Virginia Commonwealth University School of Dentistry, 521 North 11th Street, Richmond, VA 23298-0566, Fax: (804) 827-1017
    • ,
  • Hugh Douglas, DDS

      Affiliations

    • Associate Professor, Department of Prosthodontics
    • ,
  • Peter C. Moon, MS, PhD

      Affiliations

    • Associate Professor, Department of General Practice

References 

  1. Willis LM, Nicholls JI. Distortion in dental soldering as affected by gap distance. J Prosthet Dent. 1980;43:272–278
  2. Chaves M, Vermilyea SG, Papazoglou E, Brantley WA. Effects of three soldering techniques on the strength of high-palladium alloy solder joints. J Prosthet Dent. 1998;79:677–684
  3. Gegauff AG, Rosenstiel SF. The seating of one-piece and soldered fixed partial dentures. J Prosthet Dent. 1989;62:292–297
  4. Clelland NL, Carr AB, Gilat A. Comparison of strains transferred to a bone stimulant between as-cast and postsoldered implant frameworks for a five-implant-supported fixed prosthesis. J Prosthodont. 1996;5:193–200
  5. Wiskott HW, Macheret F, Bussy F, Belser UC. Mechanical and elemental characterization of solder joints and welds using a gold-palladium alloy. J Prosthet Dent. 1997;77:607–616
  6. NaBadalung DP, Nicholls JI. Laser welding of a cobalt-chromium removable partial denture alloy. J Prosthet Dent. 1998;79:285–290
  7. Riedy SJ, Lang BR, Lang BE. Fit of implant frameworks fabricated by different techniques. J Prosthet Dent. 1997;78:596–604
  8. Cattaneo G, Wagnild G, Marshall G, Watanabe L. Comparison of tensile strength of solder joints by infrared and conventional torch technique. J Prosthet Dent. 1992;68:33–37
  9. Cheng AC, Chai JY, Gilbert J, Jameson LM. Investigation of stiffness and microstructure of joints soldered with gas-oxygen torch and infrared methods. J Prosthet Dent. 1994;72:8–15
  10. Romero GG, Engelmeier R, Powers JM, Canterbury AA. Accuracy of three corrective techniques for implant bar fabrication. J Prosthet Dent. 2000;84:602–607
  11. Monday JJ, Asgar K. Tensile strength comparison of presoldered and postsoldered joints. J Prosthet Dent. 1986;55:23–27
  12. Stade EH, Reisbick MH, Preston JD. Preceramic and postceramic solder joints. J Prosthet Dent. 1975;34:527–532
  13. Phillips RW. Skinner's Science of Dental Materials. 11th ed.. St. Louis: Elsevier; 2003;p. 563-617
  14. Beck DA, Moon PC, Janus CE. A quantitative study of preporcelain soldered connector strength with palladium-based porcelain bonding alloys. J Prosthet Dent. 1986;56:301–306
  15. Janus CE, Beck DA, Moon PC. Quantitative study of soldered connector tensile strength using low-gold content alloys. J Prosthet Dent. 1985;54:517–521
  16. In:  O'Brien WJ editors. Dental Materials and their selection. 3rd ed.. Chicago: Quintessence; 2002;p. 249–257
  17. Hollenback GM, Shell JS. The accuracy of dental appliances assembled by soldering. J Calif Dent Assoc. 1965;41:207–210
  18. Hollenback GM, Smith DD, Shell JS. The accuracy of dental appliances assembled by soldering. II. J Calif Dent Assoc. 1966;42:124–128
  19. Anusavice KJ, Okabe T, Galloway SE, Hoyt DJ, Morse PK. Flexure test evaluation of presoldered base metal alloys. J Prosthet Dent. 1985;54:507–517
  20. Rasmussen EJ, Goodkind RJ, Gerberich WW. An investigation of tensile strength of dental solder joints. J Prosthet Dent. 1979;41:418–423
  21. Staffanou RS, Radke RA, Jendresen MD. Strength properties of soldered joints from various ceramic-metal combinations. J Prosthet Dent. 1980;43:31–39
  22. Kriebel R, Moore BK, Goodacre CJ, Dykema RW. A comparison of the strength of base metal and gold solder joints. J Prosthet Dent. 1984;51:60–66
  23. Lorenzana RE, Staffanou RS, Marker VA, Okabe T. Strength properties of soldered joints for a gold-palladium alloy and a palladium alloy. J Prosthet Dent. 1987;57:450–454
  24. Ziebert GJ, Hurtado A, Glapa C, Schiffleger BE. Accuracy of one-piece castings, preceramic and postceramic soldering. J Prosthet Dent. 1986;55:312–317

PII: S0022-3913(04)00744-9

doi: 10.1016/j.prosdent.2004.11.013

Journal of Prosthetic Dentistry
Volume 93, Issue 2 , Pages 148-152 , February 2005

Article Tools

* Image Usage & Resolution