Journal of Prosthetic Dentistry
Volume 93, Issue 4 , Pages 321-323 , April 2005

An indirect repair technique for fractured metal-ceramic restorations: A clinical report

  • Aristidis A. Galiatsatos, DDS, Dr Dent

      Affiliations

    • Instructor, Department of Fixed Prosthodontics
    • Corresponding Author InformationReprint requests to: Dr Aristidis A. Galiatsatos, 60 Stratigou Rogkakou Str., 15125 Athens, GREECE Fax: 30 210 6852823

References 

  1. Du Pont R. Large ceramo-metallic restorations. Int Dent J. 1968;18:288–308
  2. Rosenstiel SF, Land M, Fujimoto J. Contemporary fixed prosthodontics. 3rd ed.. St. Louis: Elsevier; 2000;p. 795-800
  3. Shillingburg HT, Hobo S, Whitsett LD. Fundamentals of fixed prosthodontics. 3rd ed.. Chicago: Quintessence Publishing Co; 1997;p. 419-42
  4. Craig RG, Powers J. Restorative dental materials. 11th ed.. St. Louis: Elsevier; 2001;p. 499-508
  5. Roberts DH. The failure of retainers in bridge prostheses. An analysis of 2,000 retainers. Br Dent J. 1970;128:117–124
  6. Jacobi R, Shillingburg HT, Duncanson MG. Effect of abutment mobility, site, and angle of impact on retention of fixed partial dentures. J Prosthet Dent. 1985;54:178–183
  7. Reuter JE, Brose MO. Failures in full crown retained dental bridges. Br Dent J. 1984;157:61–63
  8. Llobell A, Nicholls JI, Kois JC, Daly CH. Fatigue life of porcelain repair systems. Int J Prosthodont. 1992;5:205–213
  9. Libby G, Arcuri MR, LaVelle WE, Hebl L. Longevity of fixed partial dentures. J Prosthet Dent. 1997;78:127–131
  10. Strub JR, Stiffler S, Scharer P. Causes of failure following oral rehabilitation: biological versus technical factors. Quintessence Int. 1988;19:215–222
  11. Haselton DR, Diaz-Arnold AM, Dunne JT. Shear bond strengths of 2 intraoral porcelain repair systems to porcelain or metal substrates. J Prosthet Dent. 2001;86:526–531
  12. Bertolotti RL, Lacy AM, Watanabe LG. Adhesive monomers for porcelain repair. Int J Prosthodont. 1989;2:483–489
  13. Stangel I, Nathanson D, Hsu CS. Shear strength of the composite bond to etched porcelain. J Dent Res. 1987;66:1460–1465
  14. Della Bona A, van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res. 1995;74:1591–1596
  15. Pratt RC, Burgess JO, Schwartz RS, Smith JH. Evaluation of bond strength of six porcelain repair systems. J Prosthet Dent. 1989;62:11–13
  16. Kupiec KA, Wuertz KM, Barkmeier WW, Wilwerding TM. Evaluation of porcelain surface treatments and agents for composite-to-porcelain repair. J Prosthet Dent. 1996;76:119–124
  17. Welsh SL, Schwab JT. Repair technique for porcelain-fused-to-metal restorations. J Prosthet Dent. 1977;38:61–65
  18. Bakland LK. Replacing porcelain veneers in the mouth. Quintessence Int. 1972;3:45–49
  19. Barreto MT, Bottaro BF. A practical approach to porcelain repair. J Prosthet Dent. 1982;48:349–351
  20. Helpin ML, Fleming JE. Laboratory technique for the laminate veneer restoration. Pediatr Dent. 1982;4:48–50
  21. Rehany A, Stern N. A method of refacing cemented veneered crowns. J Prosthet Dent. 1977;38:158–160
  22. Kwok-hung Chung, Yen-chang Hwang. Bonding strengths of porcelain repair system with various surface treatments. J Prosthet Dent. 1997;78:267–274
  23. Appeldoorn RE, Wilwerding TM, Barkmeier WW. Bond strength of composite resin to porcelain with newer generation porcelain repair systems. J Prosthet Dent. 1993;70:6–11
  24. Cardoso AC, Spinelli Filho P. Clinical and laboratory techniques for repair of fractured porcelain in fixed prostheses: a case report. Quintessence Int. 1994;25:835–838
  25. Hirschfeld Z, Rehany A. Esthetic repair of porcelain in a complete-mouth reconstruction: a case report. Quintessence Int. 1991;22:945–947
  26. Finger IM. Salvaging the restoration. Dent Clin North Am. 1987;31:487–503
  27. Wolf DM, Powers JM, O'Keefe KL. Bond strength of composite to porcelain treated with new porcelain repair agents. Dent Mater. 1992;8:158–161
  28. Porcelain repair materials. Council on Dental Materials, Instruments and Equipment. J Am Dent Assoc. 1991;122:124–130
  29. Leibrock A, Degenhart M, Behr M, Rosentritt M, Handel G. In vitro study of the effect of thermo- and load-cycling on the bond strength of porcelain repair systems. J Oral Rehabil. 1999;26:130–137
  30. Nowlin TP, Barghi N, Norling BK. Evaluation of the bonding of three porcelain repair systems. J Prosthet Dent. 1981;46:516–518
  31. Cooley RL, Tseng EY, Evans JG. Evaluation of a 4-META porcelain repair system. J Esthet Dent. 1991;3:11–13
  32. Thurmond JW, Barkmeier WW, Wilwerding TM. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent. 1994;72:355–359
  33. Johnson JF, Dykema RW, Cunningham DM. The use and construction of gold crowns with a fused porcelain veneer – a progress report. J Prosthet Dent. 1956;6:811–821
  34. Miller TH, Thayer KE. Intraoral repair of fixed partial dentures. J Prosthet Dent. 1971;25:382–388
  35. Dent RJ. Repair of porcelain-fused-to-metal restorations. J Prosthet Dent. 1979;41:661–664
  36. Bruggers H, Jeansonne EE, Grush L. Repair technique for fractured anterior facings. J Am Dent Assoc. 1979;98:947–948
  37. Weiss PA. New design parameters: utilizing the properties of nickel-cromium superalloys. Dent Clin North Am. 1977;21:769–785
  38. Bezzon OL, Ribeiro RF, Rollo JM, Crosara S. Castability and resistance of ceramometal bonding in Ni-Cr and Ni-Cr-Be alloys. J Prosthet Dent. 2001;85:299–304
  39. Hegedus C, Daroczi L, Kokenyesi V, Beke DL. Comparative microstructural study of the diffusion zone between NiCr alloy and diffeent dental ceramics. J Dent Res. 2002;81:334–337
  40. Rake PC, Goodacre CJ, Moore BK, Munoz CA. Effect of two opaquing techiques and two metal surface conditions on metal-ceramic bond strength. J Prosthet Dent. 1995;74:8–17
  41. O'Connor RP, Mackert JR, Myers ML, Parry EE. Castability, opaque masking, and porcelain bonding of 17 porcelain-fused-to-metal alloys. J Prosthet Dent. 1996;75:367–374

PII: S0022-3913(04)00831-5

doi: 10.1016/j.prosdent.2004.12.018

Journal of Prosthetic Dentistry
Volume 93, Issue 4 , Pages 321-323 , April 2005

Article Tools

* Image Usage & Resolution