Journal of Prosthetic Dentistry
Volume 93, Issue 5 , Pages 459-466 , May 2005

The effect of a layer of resin luting agent on the biaxial flexure strength of two all-ceramic systems

  • Roland P. Pagniano Jr., DDS, MS

      Affiliations

    • Private practice, Dublin, Ohio
    • Corresponding Author InformationReprint requests to: Dr Roland Pagniano and Associates, Inc, 6805 Avery-Muirfield Dr., Suite 201, Dublin, OH 43016, Fax: 614-932-9451
    • ,
  • Robert R. Seghi, DDS, MS

      Affiliations

    • Professor, Department of Restorative and Prosthetic Dentistry
    • ,
  • Stephen F. Rosenstiel, BDS, MSD

      Affiliations

    • Professor, Department of Restorative and Prosthetic Dentistry
    • ,
  • Rentong Wang, PhD

      Affiliations

    • Graduate Research Assistant, Department of Mechanical Engineering
    • ,
  • Noriko Katsube, PhD

      Affiliations

    • Professor, Department of Mechanical Engineering

References 

  1. Sjogren G, Lantto R, Granberg A, Sundstrom BO, Tillberg A. Clinical examination of leucite-reinforced glass-ceramic crowns (Empress) in general practice: a retrospective study. Int J Prosthodont. 1999;12:122–128
  2. van Dijken JW. All-ceramic restorations: classification and clinical evaluations. Compend Contin Educ Dent. 1999;20:1115–1124
  3. Gorman CM, McDevitt WE, Hill RG. Comparison of two heat-pressed all-ceramic dental materials. Dent Mater. 2000;16:389–395
  4. Malament KA, Socransky SS. Survival of Dicor glass-ceramic dental restorations over 14 years: part I. Survival of Dicor complete coverage restorations and effect of internal surface acid etching, tooth position, gender, and age. J Prosthet Dent. 1999;81:23–32
  5. Lehner C, Studer S, Brodbeck U, Scharer P. Short-term results of IPS-Empress full-porcelain crowns. J Prosthodont. 1997;6:20–30
  6. Green DJ, Hannink RHJ, Swain MV. Transformation toughening of ceramics. Boca Raton (FL): CRC Press; 1989;p. 57-93
  7. Seghi RR, Sorensen JA. Relative flexural strength of six new ceramic materials. Int J Prosthodont. 1995;8:239–246
  8. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent. 2002;88:4–9
  9. Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent. 2002;88:10–15
  10. Burke FJ, Fleming GJ, Nathanson D, Marquis PM. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent. 2002;4:7–22
  11. Höland W, Beall G. Glass-ceramic technology. Westerville (OH): The American Ceramic Society; 2002;p. 277-308
  12. Holand W, Schweiger M, Frank M, Rheinberger V. A comparison of the microstructure and properties of the IPS Empress 2 and the IPS Empress glass-ceramics. J Biomed Mater Res. 2000;53:297–303
  13. Wagner WC, Chu TM. Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics. J Prosthet Dent. 1996;76:140–144
  14. Cattell MJ, Clarke RL, Lynch EJ. The biaxial flexural strength and reliability of four dental ceramics – Part II. J Dent. 1997;25:409–414
  15. Cattell MJ, Palumbo RP, Knowles JC, Clarke RL, Samarawickrama DY. The effect of veneering and heat treatment on the flexural strength of Empress 2 ceramics. J Dent. 2002;30:161–169
  16. Oh SC, Dong JK, Luthy H, Scharer P. Strength and microstructure of IPS Empress 2 glass-ceramic after different treatments. Int J Prosthodont. 2000;13:468–472
  17. de Jager N, Feilzer AJ, Davidson CL. The influence of surface roughness on porcelain strength. Dent Mater. 2000;16:381–388
  18. Williamson RT, Kovarik RE, Mitchell RJ. Effects of grinding, polishing, and overglazing on the flexure strength of a high-leucite feldspathic porcelain. Int J Prosthodont. 1996;9:30–37
  19. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater. 1999;15:426–433
  20. Chantikul P, Anstis GR, Lawn BR, Marshall DB. A critical evaluation of indentation techniques for measuring fracture toughness. II. Strength method. J Am Ceram Soc. 1981;64:539–543
  21. Mencík J. Strength and fracture of glass and ceramics. Glass science and technology series. vol. 12. New York: Elsevier; 1992;p. 248-50
  22. Thompson JY, Anusavice KJ. Effect of surface etching on the flexure strength and fracture toughness of Dicor disks containing controlled flaws. J Dent Res. 1994;73:505–510Erratum in: J Dent Res 1994;73:710
  23. Yen TW, Blackman RB, Baez RJ. Effect of acid etching on the flexural strength of a feldspathic porcelain and a castable glass ceramic. J Prosthet Dent. 1993;70:224–233
  24. Malament KA, Socransky SS. Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: effect of luting agent and tooth or tooth-substitute core structure. J Prosthet Dent. 2001;86:511–519
  25. Thompson JY, Anusavice KJ, Naman A, Morris HF. Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res. 1994;73:1824–1832
  26. Kelly JR, Campbell SD, Bowen HK. Fracture-surface analysis of dental ceramics. J Prosthet Dent. 1989;62:536–541
  27. Kelly JR, Giordano R, Pober R, Cima MJ. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont. 1990;3:430–440
  28. Casson AM, Glyn Jones JC, Youngson CC, Wood DJ. The effect of luting media on the fracture resistance of a flame-sprayed all-ceramic crown. J Dent. 2001;29:539–544
  29. McCormick JT, Rowland W, Shillingburg HT, Duncanson MG. Effect of luting media on the compressive strengths of two types of all-ceramic crown. Quintessence Int. 1993;24:405–408
  30. Shehab GI. The effect of adhesive luting agent–dentinal surface interactions on compressive strength of two types of all-ceramic crowns. Egypt Dent J. 1995;41:1263–1270
  31. Groten M, Probster L. The influence of different cementation modes on the fracture resistance of feldspathic ceramic crowns. Int J Prosthodont. 1997;10:169–177
  32. Harvey CK, Kelly JR. Contact damage as a failure mode during in vitro testing. J Prosthodont. 1996;5:95–100
  33. Kelly JR. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 1999;81:652–661
  34. Sjogren G, Lantto R, Tillberg A. Clinical evaluation of all-ceramic crowns (Dicor) in general practice. J Prosthet Dent. 1999;81:277–284
  35. Rosenstiel SF, Gupta PK, Van der Sluys RA, Zimmerman MH. Strength of a dental glass-ceramic after surface coating. Dent Mater. 1993;9:274–279
  36. Fleming GJ, Narayan O. The effect of cement type and mixing on the bi-axial fracture strength of cemented aluminous core porcelain discs. Dent Mater. 2003;19:69–76
  37. Cattell MJ, Knowles JC, Clarke RL, Lynch E. The biaxial flexural strength of two pressable ceramic systems. J Dent. 1999;27:183–196
  38. Jacques LB, Ferrari M, Cardoso PE. Microleakage and resin cement film thickness of luted all-ceramic and gold electroformed porcelain-fused-to-metal crowns. J Adhes Dent. 2003;5:145–152
  39. ASTM designation: F394-78. American standard test method for biaxial flexure strength (modulus of rupture) of ceramic substrates. In: Annual book of ASTM standards. Philadelphia: American Society for Testing and Materials (re-approved 1984); 1978;p. 434–440
  40. Kirstein AF, Woolley RM. Symmetrical bending of thin circular elastic plates on equally spaced point supports. J Res Natl Inst Stand Technol. 1967;71C:1–10
  41. Shetty DK, Rosenfield AR, McGuire P, Bansal GK, Duckworth WH. Biaxial flexure tests for ceramics. Am Ceram Soc Bull. 1980;59:1193–1197
  42. Kingery WD, Bowen HK, Uhlmann DR. Introduction to ceramics. 2nd ed.. New York: John Wiley; 1976;p. 770
  43. Young WC. Roark's formulas for stress and strain. 6th ed.. New York: McGraw-Hill; 1989;p. 446-7
  44. Rokhlin SI, Wang W. Double through-transmission bulk wave method for ultrasonic phase velocity measurement and determination of elastic constants of composite materials. J Acoust Soc Am. 1992;91:3303–3312
  45. Abernethy R. The new Weibull handbook. North Palm Beach (FL): Robert B. Abernethy; 2000;p. 1-48
  46. Box GE, Cox DR. An analysis of transformations. J R Stat Soc. 1964;16:211–243

PII: S0022-3913(05)00101-0

doi: 10.1016/j.prosdent.2005.02.012

Journal of Prosthetic Dentistry
Volume 93, Issue 5 , Pages 459-466 , May 2005

Article Tools

* Image Usage & Resolution