Journal of Prosthetic Dentistry
Volume 94, Issue 4 , Pages 350-356 , October 2005

Effect of surface treatment on bond strength of low-fusing porcelain to commercially pure titanium

  • Ibrahim Al Hussaini, BDS

      Affiliations

    • Postgraduate student in Prosthodontics
    • ,
  • Khalid A. Al Wazzan, BDS, MS

      Affiliations

    • Associate Professor, Department of Prosthetic Dental Sciences
    • Corresponding Author InformationReprint requests to: Dr Khalid A. Al Wazzan, Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, P.O. Box 60169, Riyadh 11545, SAUDI ARABIA, Fax: +966-1-467-8069

References 

  1. O'Brien WJ. Dental materials and their selection. 3rd ed.. Chicago: Quintessence; 2002;p. 200-9
  2. Giordano RA. Dental ceramic restorative systems. Compend Contin Educ Dent. 1996;17:779–786
  3. Anusavice KJ, Carroll JE. Effect of incompatibility stress on the fit of metal-ceramic crowns. J Dent Res. 1987;66:1341–1345
  4. Fenton AH, Jeffrey JD. Allergy to a partial denture casting: case report. Dent J. 1978;44:466–468
  5. Jones TK, Hansen CA, Singer MT, Kessler HP. Dental implications of nickel hypersensitivity. J Prosthet Dent. 1986;56:507–509
  6. Morris HF. Veterans Administration Cooperative Studies Project No. 147. Part IV: biocompatibility of base metal alloys. J Prosthet Dent. 1987;58:1–5
  7. Geurtsen W. Biocompatibility of dental casting alloys. Crit Rev Oral Biol Med. 2002;13:71–84
  8. Wataha JC. Biocompatibility of dental casting alloys: a review. J Prosthet Dent. 2000;83:223–234
  9. Kasemo B. Biocompatibility of titanium implants: surface science aspects. J Prosthet Dent. 1983;49:832–837
  10. Lautenschlager EP, Monaghan P. Titanium and titanium alloys as dental materials. Int Dent J. 1993;43:245–253
  11. Reclaru L, Meyer JM. Study of corrosion between a titanium implant and dental alloys. J Dent. 1994;22:159–168
  12. Wang RR, Fenton A. Titanium for prosthodontic applications: a review of the literature. Quintessence Int. 1996;27:401–408
  13. Boening KW, Walter MH, Reppel PD. Non-cast titanium restorations in fixed prosthodontics. J Oral Rehabil. 1992;19:281–287
  14. Mori T, Togaya T, Jean-Louis M, Yabugami M. Titanium for removable dentures. I. Laboratory procedures. J Oral Rehabil. 1997;24:338–341
  15. Ortorp A, Jemt T, Back T, Jalevic T. Comparisons of precision of fit between cast and CNC-milled titanium implant frameworks for the edentulous mandible. Int J Prosthodont. 2003;16:194–200
  16. Kimura H, Horng CJ, Okazaki M, Takahashi J. Oxidation effects on porcelain-titanium interface reactions and bond strength. Dent Mater J. 1990;9:91–99
  17. Adachi M, Mackert JR, Parry EE, Fairhurst CW. Oxide adherence and porcelain bonding to titanium and Ti-6Al-4V alloy. J Dent Res. 1990;69:1230–1235
  18. Lacy AM. The chemical nature of dental porcelain. Dent Clin North Am. 1977;21:661–667
  19. Low D, Sumii T, Swain M. Thermal expansion coefficient of titanium casting. J Oral Rehabil. 2001;28:239–242
  20. Pang IC, Gilbert JL, Chai J, Lautenschlager EP. Bonding characteristics of low-fusing porcelain bonded to pure titanium and palladium-copper alloy. J Prosthet Dent. 1995;73:17–25
  21. Yilmaz H, Dincer C. Comparison of the bond compatibility of titanium and an NiCr alloy to dental porcelain. J Dent. 1999;27:215–222
  22. Atsu S, Berksun S. Bond strength of three porcelains to two forms of titanium using two firing atmospheres. J Prosthet Dent. 2000;84:567–574
  23. Derand T, Hero H. Bond strength of porcelain on cast vs. wrought titanium. Scand J Dent Res. 1992;100:184–188
  24. Gilbert JL, Covey DA, Lautenschlager EP. Bond characteristics of porcelain fused to milled titanium. Dent Mater. 1994;10:134–140
  25. Probster L, Maiwald U, Weber H. Three-point bending strength of ceramics fused to cast titanium. Eur J Oral Sci. 1996;104:313–319
  26. Troia MG, Henriques GE, Nobilo MA, Mesquita MF. The effect of thermal cycling on the bond strength of low-fusing porcelain to commercially pure titanium and titanium-aluminum-vanadium alloy. Dent Mater. 2003;19:790–796
  27. Reyes MJ, Oshida Y, Andres CJ, Barco T, Hovijitra S, Brown D. Titanium-porcelain system. Part III: effects of surface modification on bond strengths. Biomed Mater Eng. 2001;11:117–136
  28. Miyakawa O, Watanabe K, Okawa S, Kanatani M, Nakano S, Kobayashi M. Surface contamination of titanium by abrading treatment. Dent Mater J. 1996;15:11–21
  29. al Mutawa NJ, Sato T, Shiozawa I, Hasegawa S, Miura H. A study of the bond strength and color of ultralow-fusing porcelain. Int J Prosthodont. 2000;13:159–165
  30. International Organization for Standardization. ISO 9693: metal-ceramic dental restorative systems; 1999. Available at: http://www.iso.ch/iso/en/prods-services/ISOstore/store.html. Accessed August 28, 2005.
  31. Wang RR, Fung KK. Oxidation behavior of surface-modified titanium for titanium-ceramic restorations. J Prosthet Dent. 1997;77:423–434
  32. Jochen DG, Caputo AA, Matyas J. Effect of metal surface treatment on ceramic bond strength. J Prosthet Dent. 1986;55:186–188
  33. Hammad IA, Stein RS. A quantitative study for the bond and color of ceramometals. Part I. J Prosthet Dent. 1990;63:643–653
  34. Hofstede TM, Ercoli C, Graser GN, Tallents RH, Moss ME, Zero DT. Influence of metal surface finishing on porcelain porosity and beam failure loads at the metal-ceramic interface. J Prosthet Dent. 2000;84:309–317
  35. Kelly M, Asgar K, O'Brien WJ. Tensile strength determination of the interface between porcelain fused to gold. J Biomed Mater Res. 1969;3:403–408

PII: S0022-3913(05)00393-8

doi: 10.1016/j.prosdent.2005.07.007

Journal of Prosthetic Dentistry
Volume 94, Issue 4 , Pages 350-356 , October 2005

Article Tools

* Image Usage & Resolution