Journal of Prosthetic Dentistry
Volume 94, Issue 4 , Pages 370-376 , October 2005

Changes in gloss after simulated generalized wear of composite resins

  • Yong-Keun Lee, DDS, PhD

      Affiliations

    • Associate Professor, Department of Dental Biomaterials Science, College of Dentistry, Seoul National University
    • Corresponding Author InformationReprint requests to: Dr Yong-Keun Lee, Associate Professor, Department of Dental Biomaterials Science, College of Dentistry, Seoul National University, 28 Yeongeon-dong, Jongro-gu, Seoul, REPUBLIC OF KOREA, Fax: 82-2-740-8694
    • ,
  • Huan Lu, DDS, PhD

      Affiliations

    • Assistant Professor of Oral Biomaterials, Department of Restorative Dentistry and Biomaterials, Houston Biomaterials Research Center, University of Texas Dental Branch at Houston
    • ,
  • Makoto Oguri

      Affiliations

    • Scientist, Tokuyama Dental Corp
    • ,
  • John M. Powers, PhD

      Affiliations

    • Professor, Department of Restorative Dentistry and Biomaterials, and Director, Houston Biomaterials Research Center, University of Texas Dental Branch at Houston

References 

  1. O'Brien WJ, Johnston WM, Fanian F, Lambert S. The surface roughness and gloss of composites. J Dent Res. 1984;63:685–688
  2. Charig A, Winston A, Flickinger M. Enamel mineralization by calcium-containing bicarbonate toothpastes: assessment by various techniques. Compend Contin Educ Dent. 2004;25:14–24
  3. Joiner A. Tooth colour: a review of the literature. J Dent. 2004;32:3–12
  4. Keyf F, Etikan I. Evaluation of gloss changes of two denture acrylic resin materials in four different beverages. Dent Mater. 2004;20:244–251
  5. Lu H, Roeder LB, Lei L, Powers JM. Effect of surface roughness on stain resistance of dental resin composites. J Esthet Restor Dent. 2005;17:102–108
  6. Mandikos MN, McGivney GP, Davis E, Bush PJ, Carter JM. A comparison of the wear resistance and hardness of indirect composite resins. J Prosthet Dent. 2001;85:386–395
  7. Obein G, Knoblauch K, Vienot F. Difference scaling of gloss: nonlinearity, binocularity, and constancy. J Vis. 2004;4:711–720
  8. Schmidlin PR, Sener B, Lutz F. Cleaning and polishing efficacy of abrasive-bristle brushes and a prophylaxis paste on resin composite material in vitro. Quintessence Int. 2002;33:691–699
  9. van Dijken JW, Ruyter IE. Surface characteristics of posterior composites after polishing and toothbrushing. Acta Odontol Scand. 1987;45:337–346
  10. Stanford WB, Fan PL, Wozniak WT, Stanford JW. Effect of finishing on color and gloss of composites with different fillers. J Am Dent Assoc. 1985;110:211–213
  11. Lee YK, Lim BS, Kim CW. Effect of surface conditions on the color of dental resin composites. J Biomed Mater Res. 2002;63:657–663
  12. Mair LH, Stolarski TA, Vowles RW, Lloyd CH. Wear: mechanisms, manifestations and measurement. Report of a workshop. J Dent. 1996;24:141–148
  13. Kawai K, Leinfelder KF. In vitro evaluation of OCA wear resistance of posterior composites. Dent Mater. 1995;11:246–251
  14. Matsumura H, Leinfelder KF, Kawai K. Three-body wear of light-activated composite veneering materials. J Prosthet Dent. 1995;73:233–239
  15. Paravina RD, Roeder L, Lu H, Vogel K, Powers JM. Effect of finishing and polishing procedures on surface roughness, gloss and color of resin-based composites. Am J Dent. 2004;17:262–266
  16. Cha HS, Lee YK, Lim BS, Rhee SH, Yang HC. Evaluation of wear resistance of dental resin composites with a 3D profilometer. J Biomed Mater Res B Appl Biomater. 2004;71:414–420
  17. Brainard DH, Maloney LT. Perception of color and material properties in complex scenes. J Vis. 2004;4:2–4
  18. Delahunt PB, Brainard DH. Color constancy under changes in reflected illumination. J Vis. 2004;4:764–778
  19. Campbell PM, Johnston WM, O'Brien WJ. Light scattering and gloss of an experimental quartz-filled composite. J Dent Res. 1986;65:892–894
  20. Tanoue N, Matsumura H, Atsuta M. Wear and surface roughness of current prosthetic composites after toothbrush/dentifrice abrasion. J Prosthet Dent. 2000;84:93–97
  21. Neme AM, Wagner WC, Pink FE, Frazier KB. The effect of prophylactic polishing pastes and toothbrushing on the surface roughness of resin composite materials in vitro. Oper Dent. 2003;28:808–815
  22. Sakaguchi RL, Douglas WH, DeLong R, Pintado MR. The wear of a posterior composite in an artificial mouth: a clinical correlation. Dent Mater. 1986;2:235–240
  23. Leinfelder KF, Suzuki S. In vitro wear device for determining posterior composite wear. J Am Dent Assoc. 1999;130:1347–1353
  24. Craig RG, Powers JM. Restorative dental materials. 11th ed.. St. Louis: Mosby; 2001;p. 244
  25. Condon JR, Ferracane JL. Factors effecting dental composite wear in vitro. J Biomed Mater Res. 1997;38:303–313
  26. Condon JR, Ferracane JL. In vitro wear of composite with varied cure, filler level, and filler treatment. J Dent Res. 1997;76:1405–1411
  27. Peutzfeldt A. Resin composites in dentistry: the monomer systems. Eur J Oral Sci. 1997;105:97–116

PII: S0022-3913(05)00432-4

doi: 10.1016/j.prosdent.2005.08.006

Journal of Prosthetic Dentistry
Volume 94, Issue 4 , Pages 370-376 , October 2005

Article Tools

* Image Usage & Resolution