Journal of Prosthetic Dentistry
Volume 94, Issue 5 , Pages 445-452 , November 2005

Evaluation of adhesion of chairside hard relining materials to denture base polymers

  • Mustafa Murat Mutluay, DDS, PhD

      Affiliations

    • Visiting Scientist, NIOM, Scandinavian Institute of Dental Materials; Research Assistant, University of Oslo, Faculty of Dentistry, Department of Prosthodontics
    • Corresponding Author InformationReprint requests to: Dr M. Murat Mutluay, NIOM, Scandinavian Institute of Dental Materials, Kirkeveien 71 B, Haslum, 1305 Oslo, NORWAY, Fax: +47 67 59 15 30
    • ,
  • I. Eystein Ruyter, Dr Rer Nat, Dr Philos

      Affiliations

    • Senior Scientist, NIOM, Scandinavian Institute of Dental Materials

References 

  1. Wrangsjo K, Swartling C, Meding B. Occupational dermatitis in dental personnel: contact dermatitis with special reference to (meth)acrylates in 174 patients. Contact Dermatitis. 2001;45:158–163
  2. Kanerva L, Estlander T, Jolanki R, Tarvainen K. Occupational allergic contact dermatitis caused by exposure to acrylates during work with dental prostheses. Contact Dermatitis. 1993;28:268–275
  3. Bunch J, Johnson GH, Brudvik JS. Evaluation of hard direct reline resins. J Prosthet Dent. 1987;57:512–519
  4. Arima T, Nikawa H, Hamada T. Harsini. Composition and effect of denture base resin surface primers for reline acrylic resins. J Prosthet Dent. 1996;75:457–462
  5. Minami H, Suzuki S, Minesaki Y, Kurashige H, Tanaka T. In vitro evaluation of the influence of repairing condition of denture base resin on the bonding of autopolymerizing resins. J Prosthet Dent. 2004;91:164–170
  6. Arena CA, Evans DB, Hilton TJ. A comparison of bond strengths among chairside hard reline materials. J Prosthet Dent. 1993;70:126–131
  7. Cucci AL, Rached RN, Giampaolo ET, Vergani CE. Tensile bond strengths of hard chairside reline resins as influenced by water storage. J Oral Rehabil. 1999;26:631–634
  8. Leles CR, Machado AL, Vergani CE, Giampaolo ET, Pavarina AC. Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment. J Oral Rehabil. 2001;28:1153–1157
  9. Vallittu PK. Some factors affecting the transverse strength of repaired denture acrylic resin. Eur J Prosthodont Restor Dent. 1996;4:7–9
  10. Takahashi Y, Chai J. Shear bond strength of denture reline polymers to denture base polymers. Int J Prosthodont. 2001;14:271–275
  11. Chai J, Takahashi Y, Kawaguchi M. The flexural strengths of denture base acrylic resins after relining with a visible-light-activated material. Int J Prosthodont. 1998;11:121–124
  12. Takahashi Y, Kawaguchi M, Chai J. Flexural strength at the proportional limit of a denture base material relined with four different denture reline materials. Int J Prosthodont. 1997;10:508–512
  13. Takahashi Y, Chai J. Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin. Int J Prosthodont. 2001;14:531–535
  14. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent. 1994;72:639–643
  15. Mittal KL. Adhesion measurement, recent progress, unsolved problems, and prospects. In:  Mittal KL editors. Adhesion measurement of thin films, thick films, and bulk coatings – stp 640. Philadelphia: American Society for Testing & Materials; 1978;p. 5–27
  16. Vallittu PK, Ruyter IE. The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers. J Prosthet Dent. 1997;78:194–199
  17. Vallittu PK, Ruyter IE. Swelling of poly (methyl methacrylate) resin at the repair joint. Int J Prosthodont. 1997;10:254–258
  18. American Society for Testing and Materials . Standard test method for tensile strength of adhesives by means of bar and rod specimens. [ASTM D 2095-96] In: Annual book of ASTM Standards [15.06]. West Conshohocken (PA): ASTM International; 1988;p. 137–139
  19. Ruyter IE, Oysaed H. Analysis and characterization of dental polymers. CRC Critical Reviews in Biocompatibility. 1998;4:247–279
  20. Gjos N, Urdal G, Ruyter IE, Sjovik IJ. Identification of methacrylates and acrylates in dental materials by mass spectrometry. Anal Chim Acta. 1983;149:87–99
  21. Tezvergil A, Lassila LV, Vallittu PK. The shear bond strength of bidirectional and random-oriented fibre-reinforced composite to tooth structure. J Dent. 2005;33:509–516
  22. Nakabayashi N, Takarada K. Effect of HEMA on bonding to dentin. Dent Mater. 1992;8:125–130
  23. Miettinen VM, Narva KK, Vallittu PK. Water sorption, solubility and effect of post-curing of glass fibre reinforced polymers. Biomaterials. 1999;20:1187–1194
  24. Brewis DM. Weak boundary layers. In:  Packham DE editors. Handbook of adhesion. New York: John Wiley; 1992;p. 493–496
  25. Brandrup J, Immergut EH, Grulke EA, Akihiro A, Bloch DR. Polymer handbook, Volume 1. 4th ed.. Hoboken (NJ): John Wiley; 2003;p. III/14, III/16

 This work was presented at the 81st General Session of the International Association for Dental Research, June, 2003, Goteborg, Sweden.This work was partially supported by The Research Council of Norway.

PII: S0022-3913(05)00437-3

doi: 10.1016/j.prosdent.2005.08.011

Journal of Prosthetic Dentistry
Volume 94, Issue 5 , Pages 445-452 , November 2005

Article Tools

* Image Usage & Resolution