Effect of soldering on the metal-ceramic bond strength of an Ni-Cr base alloy

References 

1. Schwartz MM. Introduction to brazing and soldering. In:  Olson DL,  Siewert TA,  Liu S,  Edwards GR editor. Welding, brazing and soldering. Materials Park (OH): ASM Intl; 1993;p. 109–111
2. ISO 9333. Dental brazing materials. International Standard Organization, Geneva, 1990. Available at: http://www.iso.ch/iso/en/prods-services/ISOstore/store.html. Accessed June 15, 2005.
3. Craig R, Powers J. Restorative dental materials. 11th ed.. St Louis: Elsevier; 2001;p. 515-51, 575-93
4. In:  Anusavice KJ,  Phillips RW editor. Phillips' science of dental materials. 11th ed.. St Louis: Elsevier; 2003;p. 563–621
5. Ryge G. Dental soldering procedures. Dent Clin North Am. 1958;2:747–757
6. Shigeto N, Yanagihara T, Murakami S, Hamada T. Corrosion properties of soldered joints. Part II: corrosion pattern of dental solder and dental nickel-chromium alloy. J Prosthet Dent. 1991;66:607–610
   • Abstract
   • Full-Text PDF (1840 KB)
   • CrossRef
7. Sobieralski JA, Schelb E, Prihoda TJ. Torch versus oven preceramic soldering of a nickel-chromium alloy. Quintessence Int. 1990;21:753–757
   • MEDLINE
8. Louly AC, Mora AF, Moore BK, Andres CJ, Goodacre CJ. Tensile strength of preceramic solder joints formed using an infrared heat source. Int J Prosthodont. 1991;4:425–431
   • MEDLINE
9. Shigeto N, Yanagihara T, Hamada T, Budtz-Jorgensen E. Corrosion properties of soldered joints. Part I: electrochemical action of dental solder and dental nickel-chromium alloy. J Prosthet Dent. 1989;62:512–515
   • Abstract
   • Full-Text PDF (374 KB)
   • CrossRef
10. Staffanou RS, Radke RA, Jendresen MD. Strength properties of soldered joints from various ceramic-metal combinations. J Prosthet Dent. 1980;43:31–39
    • Full-Text PDF (7501 KB)
    • CrossRef
11. Anusavice KJ, Okabe T, Galloway SE, Hoyt DJ, Morse PK. Flexure test evaluation of presoldered base metal alloys. J Prosthet Dent. 1985;54:507–517
    • Full-Text PDF (8110 KB)
    • CrossRef
12. Anusavise KJ, Shafagh I. Inert gas presoldering of nickel-chromium alloys. J Prosthet Dent. 1986;55:317–323
    • Full-Text PDF (1272 KB)
    • CrossRef
13. Gavelis JR, Lim SB, Guckes AD, Morency JD, Sozio RB. A comparison of the bond strength of two ceramometal systems. J Prosthet Dent. 1982;48:424–428
    • Full-Text PDF (1852 KB)
    • CrossRef
14. Bagby M, Marshall SJ, Marshall GW. Metal ceramic compatibility: a review of the literature. J Prosthet Dent. 1990;63:21–25
    • Abstract
    • Full-Text PDF (617 KB)
    • CrossRef
15. Naylor P. Introduction to metal ceramic technology. Chicago: Quintessence; 1992;p. 486
16. Apotheker H, Nishimura I, Seerattan C. Laser-welded vs. soldered nonprecious alloy dental bridges: a comparative study. Lasers Surg Med. 1984;4:207–213
    • MEDLINE
    • CrossRef
17. Galindo DF, Ercoli C, Grazer GN, Tallents RH, Moss ME. Effect of soldering on metal-porcelain bond strength in repaired porcelain-fused-to-metal castings. J Prosthet Dent. 2001;85:88–94
    • Abstract
    • Full Text
    • Full-Text PDF (335 KB)
    • CrossRef
18. Kang MS, Ercoli C, Galindo DF, Graser GN, Moss ME, Tallents RH. Comparison of the load at failure of soldered and nonsoldered porcelain-fused-to-metal crowns. J Prosthet Dent. 2003;90:235–240
    • Abstract
    • Full Text
    • Full-Text PDF (258 KB)
    • CrossRef
19. ISO 9693. Metal-ceramic dental restorative systems. International Organization for Standardization, 2nd ed. Geneva 1999. Availabe at: http://www.iso.ch/iso/en/prods-services/ISOstore/store.html. Accessed June 15, 2005.
20. Morton RK. Topography of surfaces. In:  Cotell CM,  Sprague JA,  Smidt FA editor. Surface engineering. Materials Park (OH): ASM Intl; 1994;p. 136–138
21. Guha A. Bending strength tests. In:  Murray JL editors. 9th ed. ASM metals handbook. Vol. 8:Materials Park (OH): ASM Intl; 1985;p. 132–136
22. Ugural AC, Fenster SK. Advanced strength and applied elasticity. 4th ed.. Upper Saddle River (NJ): Prentice Hall; 1995;p. 207-23