Journal of Prosthetic Dentistry
Volume 95, Issue 4 , Pages 315-322 , April 2006

Load-fatigue performance of gold crowns luted with resin cements

  • Joanne Ngo Uy, DDM, MDS

      Affiliations

    • Visiting Fellow, Department of Restorative Dentistry, National University of Singapore
    • Corresponding Author InformationReprint requests to: Dr Joanne N. Uy, Department of Restorative Dentistry, Faculty of Dentistry, National University of Singapore, 5 Lower Kent Ridge Rd, SINGAPORE 119074, Fax: 65-67785742
  • ,
  • Jennifer Neo Chiew Lian, BDS, MS

      Affiliations

    • Associate Professor, Department of Restorative Dentistry, National University of Singapore
  • ,
  • Jack Ivan Nicholls, PhD

      Affiliations

    • Professor, Department of Restorative Dentistry, School of Dentistry, University of Washington
  • ,
  • Keson Beng-Choon Tan, BDS, MSD

      Affiliations

    • Associate Professor, Department of Restorative Dentistry, National University of Singapore

References 

  1. Kydd WL, Nicholls JI, Harrington G, Freeman M. Marginal leakage of cast gold crowns luted with zinc phosphate cement: an in vivo study. J Prosthet Dent. 1996;75:9–13
  2. Diaz-Arnold AM, Vargas MA, Haselton DR. Current status of luting agents for fixed prosthodontics. J Prosthet Dent. 1999;81:135–141
  3. El-Mowafy OM, Fenton AH, Forrester N, Milenkovic M. Retention of metal ceramic crowns cemented with resin cements: effects of preparation taper and height. J Prosthet Dent. 1996;76:524–529
  4. Mitchell CA, Abbariki M, Orr JF. The influence of luting cement on the probabilities of survival and modes of failure of cast full-coverage crowns. Dent Mater. 2000;16:198–206
  5. Ergin S, Gemalmaz D. Retentive properties of five different luting cements on base and noble metal copings. J Prosthet Dent. 2002;88:491–497
  6. Pameijer CH, Jefferies SR. Retentive properties and film thickness of 18 luting agents and systems. Gen Dent. 1996;44:524–530
  7. Ayad MF, Rosenstiel SF, Salama M. Influence of tooth surface roughness and type of cement on retention of complete cast crowns. J Prosthet Dent. 1997;77:116–121
  8. Johnson GH, Lepe X, Bales DJ. Crown retention with use of a 5% glutaraldehyde sealer on prepared dentin. J Prosthet Dent. 1998;79:671–676
  9. Yim NH, Rueggeberg FA, Caughman WF, Gardner FM, Pashley DH. Effect of dentin desensitizers and cementing agents on retention of full crowns using standardized crown preparations. J Prosthet Dent. 2000;83:459–465
  10. Ernst CP, Wenzl N, Stender E, Willershausen B. Retentive strengths of cast gold crowns using glass ionomer, compomer, or resin cement. J Prosthet Dent. 1998;79:472–476
  11. Wiskott HW, Nicholls JI, Belser UC. Stress fatigue: basic principles and prosthodontic implications. Int J Prosthodont. 1995;8:105–116
  12. The glossary of prosthodontic terms. J Prosthet Dent. 2005;94:38
  13. Kelly E. Fatigue failure in denture base polymers. J Prosthet Dent. 1969;21:257–266
  14. Stafford GD, Lewis TT, Huggett R. Fatigue testing of denture base polymers. J Oral Rehabil. 1982;9:139–154
  15. Nielsen LE. Simple theory of stress strain properties of filled polymers. J Appl Polymer Sci. 1966;10:97–103
  16. Wiskott HW, Nicholls JI, Taggart R. Fatigue strength of a Au-Pd alloy/585 solder combination. J Dent Res. 1991;70:140–145
  17. Libman WJ, Nicholls JI. Load fatigue of teeth restored with cast posts and cores and complete crowns. Int J Prosthodont. 1995;8:155–161
  18. Fan P, Nicholls JI, Kois JC. Load fatigue of five restoration modalities in structurally compromised premolars. Int J Prosthodont. 1995;8:213–220
  19. Junge T, Nicholls JI, Phillips KM, Libman WJ. Load fatigue of compromised teeth: a comparison of 3 luting cements. Int J Prosthodont. 1998;11:558–564
  20. Hsu YB, Nicholls JI, Phillips KM, Libman WJ. Effect of core bonding on fatigue failure of compromised teeth. Int J Prosthodont. 2002;15:175–178
  21. Fissore B, Nicholls JI, Yuodelis RA. Load fatigue of teeth restored by a dentin bonding agent and a posterior composite resin. J Prosthet Dent. 1991;65:80–85
  22. Wiskott HW, Nicholls JI, Belser UC. Fatigue resistance of soldered joints: a methodological study. Dent Mater. 1994;10:215–220
  23. Wiskott HW, Nicholls JI, Belser UC. The relationship between abutment taper and resistance of cemented crowns to dynamic loading. Int J Prosthodont. 1996;9:117–139
  24. Wiskott HW, Nicholls JI, Belser UC. The effect of tooth preparation height and diameter on the resistance of complete crowns to fatigue loading. Int J Prosthodont. 1997;10:207–215
  25. Wiskott HW, Belser UC, Scherrer SS. The effect of film thickness and surface texture on the resistance of cemented extracoronal restorations to lateral fatigue loading. Int J Prosthodont. 1999;12:255–262
  26. Freeman MA, Nicholls JI, Kydd WL, Harrington GW. Leakage associated with load fatigue induced preliminary failure of full crowns over three post and core systems. J Endod. 1998;24:26–32
  27. Pashley DH. Clinical considerations of microleakage. J Endod. 1990;16:70–77
  28. Lewis R, Smith BG. A clinical survey of failed post-retained crowns. Br Dent J. 1988;165:95–97
  29. Sorensen J, Engelman M. Ferrule design and fracture resistance of endodontically treated teeth. J Prosthet Dent. 1990;63:529–536
  30. Li ZC, White SN. Mechanical properties of dental luting cements. J Prosthet Dent. 1999;81:597–609
  31. Mitchell CA, Orr JF. Comparison of conventional and resin-modified glass-ionomer luting cements in the retention of post-crowns by fatigue loading. J Oral Rehabil. 1998;25:472–478
  32. Anderson DJ. Measurement of stress in mastication. I. J Dent Res. 1956;35:671–673
  33. Anderson DJ. Measurement of stress in mastication. II. J Dent Res. 1956;35:664–670
  34. Graf H. Bruxism. Dent Clin North Am. 1969;13:659–665
  35. Browning WD, Nelson SK, Cibirka R, Myers ML. Comparison of luting cements for minimally retentive crown preparations. Quintessence Int. 2002;33:95–100

 Presented at the IADR/AADR 83rd General Session and Exhibition, March 2005, Baltimore, Mass.This study was supported by National University of Singapore Research Grant R-224-000-007-112.

PII: S0022-3913(06)00045-X

doi: 10.1016/j.prosdent.2006.01.016

Journal of Prosthetic Dentistry
Volume 95, Issue 4 , Pages 315-322 , April 2006