Journal of Prosthetic Dentistry
Volume 98, Issue 4 , Pages 277-284 , October 2007

The influence of cavity preparation design on fracture strength and mode of fracture of laboratory-processed composite resin restorations

  • Rodrigo Borges Fonseca, DDS, MS

      Affiliations

    • Student, Piracicaba Dental School, University of Campinas; Professor, Department of Operative Dentistry and Dental Materials, Dental School, Biomechanics Group, Federal University of Uberlandia, Minas Gerais, Brazil
    • ,
  • Alfredo Julio Fernandes-Neto, DDS, MS, PhD

      Affiliations

    • Professor and Chairman, Department of Fixed Prosthodontics, Occlusion and Dental Materials, Federal University of Uberlandia, Minas Gerais, Brazil
    • ,
  • Lourenco Correr-Sobrinho, DDS, MS, PhD

      Affiliations

    • Professor and Chairman, Department of Dental Materials, Piracicaba Dental School, State University of Campinas, Sao Paulo, Brazil
    • ,
  • Carlos Jose Soares, DDS, MS, PhD

      Affiliations

    • Professor, Department of Operative Dentistry and Dental Materials, Dental School, Biomechanics Group, Federal University of Uberlandia, Minas Gerais, Brazil
    • Corresponding Author InformationCorresponding author: Dr Carlos Jose Soares Faculdade de Odontologia, Universidade Federal de Uberlandia Departamento de Dentistica e Materiais Odontologicos Av. Para, n° 1720, Campus Umuarama Bloco 2B, Sala 2B-24,CEP 38400-902 Uberlandia, Minas Gerais BRAZIL Fax: 55-34-32182279

REFERENCES 

  1. Furukawa K , Inai N , Tagami J . The effects of luting resin bond to dentin on the strength of dentin supported by indirect resin composite . Dent Mater . 2002;18:136–142
  2. Bremer BD , Geurtsen W . Molar fracture resistance after adhesive restoration with ceramic inlays or resin-based composites . Am J Dent . 2001;14:216–220
  3. St-Georges AJ , Sturdevant JR , Swift EJ , Thompson JY . Fracture resistance of prepared teeth restored with bonded inlay restorations . J Prosthet Dent . 2003;89:551–557
  4. Krejci I , Duc O , Dietschi D , de Campos E . Marginal adaptation, retention and fracture resistance of adhesive composite restorations on devital teeth with and without posts . Oper Dent . 2003;28:127–135
  5. Mondelli J , Steagall L , Ishikiriama A , de Lima Navarro MF , Soares FB . Fracture strength of human teeth with cavity preparations . J Prosthet Dent . 1980;43:419–422
  6. Stampalia LL , Nicholls JI , Brudvik JS , Jones DW . Fracture resistance of teeth with resin-bonded restorations . J Prosthet Dent . 1986;55:694–698
  7. Joynt RB , Wieczkowski G , Klockowski R , Davis EL . Effects of composite restorations on resistance to cuspal fracture in posterior teeth . J Prosthet Dent . 1987;57:431–435
  8. Reel DC , Mitchell RJ . Fracture resistance of teeth restored with Class II composite restorations . J Prosthet Dent . 1989;61:177–180
  9. Burke FJ , Wilson NH , Watts DC . The effect of cavity wall taper on fracture resistance of teeth restored with resin composite inlays . Oper Dent . 1993;18:230–236
  10. Burke FJ , Watts DC . Fracture resistance of teeth restored with dentin-bonded crowns . Quintessence Int . 1994;25:335–340
  11. Burke FJ . The effect of variations in bonding procedure on fracture resistance of dentin-bonded all-ceramic crowns . Quintessence Int . 1995;26:293–300
  12. Fennis WM , Kuijs RH , Kreulen CM , Verdonschot N , Creugers NH . Fatigue resistance of teeth restored with cuspal-coverage composite restorations . Int J Prosthodont . 2004;17:313–317
  13. Mandikos MN , McGivney GP , Davis E , Bush PJ , Carter JM . A comparison of the wear resistance and hardness of indirect composite resins . J Prosthet Dent . 2001;85:386–395
  14. Cesar PF , Miranda WG , Braga RR . Influence of shade and storage time on the flexural strength, flexural modulus, and hardness of composites used for indirect restorations . J Prosthet Dent . 2001;86:289–296
  15. Soares CJ , Pizi EC , Fonseca RB , Martins LR . Mechanical properties of light-cured composites polymerized with several additional post-curing methods . Oper Dent . 2005;30:389–394
  16. Touati B , Aidan N . Second generation laboratory composite resins for indirect restorations . J Esthet Dent . 1997;9:108–118
  17. Ku CW , Park SW , Yang HS . Comparison of the fracture strengths of metal-ceramic crowns and three ceromer crowns . J Prosthet Dent . 2002;88:170–175
  18. Cho L , Song H , Koak J , Heo S . Marginal accuracy and fracture strength of ceromer/fiber-reinforced composite crowns: effect of variations in preparation design . J Prosthet Dent . 2002;88:388–395
  19. Soares CJ , Martins LR , Pfeifer JM , Giannini M . Fracture resistance of teeth restored with indirect-composite and ceramic inlay systems . Quintessence Int . 2004;35:281–286
  20. Magne P , Perakis N , Belser UC , Krejci I . Stress distribution of inlay-anchored adhesive fixed partial dentures: a finite element analysis of the influence of restorative materials and abutment preparation design . J Prosthet Dent . 2002;87:516–527
  21. Kelly JR . Clinically relevant approach to failure testing of all-ceramic restorations . J Prosthet Dent . 1999;81:652–661
  22. Chen HY , Hickel R , Setcos JC , Kunzelmann KH . Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns . J Prosthet Dent . 1999;82:468–475
  23. Yoshinari M , Derand T . Fracture strength of all-ceramic crowns . Int J Prosthodont . 1994;7:329–338
  24. Burke FJ . Tooth fracture in vivo and in vitro . J Dent . 1992;20:131–139
  25. De Jager N , Pallav P , Feilzer AJ . The influence of design parameters on the FEA-determined stress distribution in CAD-CAM produced all-ceramic dental crowns . Dent Mater . 2005;21:242–251
  26. Cho L , Choi J , Yi YJ , Park CJ . Effect of finish line variants on marginal accuracy and fracture strength of ceramic optimized polymer/fiber-reinforced composite crowns . J Prosthet Dent . 2004;91:554–560
  27. Khers SC , Carpenter CW , Vetter JD , Staley RN . Anatomy of cusps of posterior teeth and their fracture potential . J Prosthet Dent . 1990;64:139–147
  28. Dejak B , Mlotkowski A , Romanowicz M . Finite element analysis of stresses in molars during clenching and mastication . J Prosthet Dent . 2003;90:591–597
  29. Ortega VL , Pegoraro LF , Conti PC , do Valle AL , Bonfante G . Evaluation of fracture resistance of endodontically treated maxillary premolars, restored with ceromer or heat-pressed ceramic inlays and fixed with dual-resin cements . J Oral Rehabil . 2004;31:393–397
  30. de Freitas CR , Miranda MI , de Andrade MF , Flores VH , Vaz LG , Guimaraes C . Resistance to maxillary premolar fractures after restoration of class II preparations with resin composite or ceromer . Quintessence Int . 2002;33:589–594
  31. Steele A , Johnson BR . In vitro fracture strength of endodontically treated premolars . J Endod . 1999;25:6–8
  32. Soares CJ , Pizi EC , Fonseca RB , Martins LR . Influence of root embedment material and periodontal ligament simulation on fracture resistance tests . Braz Oral Res . 2005;19:11–16
  33. Soares CJ , Martins LR , Fonseca RB , Correr-Sobrinho L , Fernandes-Neto AJ . Influence of cavity preparation design on fracture resistance of posterior Leucite-reinforced ceramic restorations . J Prosthet Dent . 2006;95:421–429
  34. Soares CJ , Soares PV , Pereira JC , Fonseca RB . Surface treatment protocols in the cementation process of ceramic and laboratory-processed composite restorations: a literature review . J Esthet Restor Dent . 2005;17:224–235
  35. Lehmann F , Eickemeyer G , Rammelsberg P . Fracture resistance of metal-free composite crowns-effects of fiber reinforcement, thermal cycling, and cementation technique . J Prosthet Dent . 2004;92:258–264
  36. Van Meerbeek B , Vargas M , Inoue S , Yoshida Y , Perdigao J , Lambrechts P , et al.   Microscopy investigations. Techniques, results, limitations . Am J Dent . 2000;13:3D–18D

PII: S0022-3913(07)60101-2

doi: 10.1016/S0022-3913(07)60101-2

Journal of Prosthetic Dentistry
Volume 98, Issue 4 , Pages 277-284 , October 2007

Article Tools

* Image Usage & Resolution