Journal of Prosthetic Dentistry
Volume 103, Issue 5 , Pages 267-274 , May 2010

Shear bond strength between veneering ceramics and ceria-stabilized zirconia/alumina

  • Jens Fischer, Dr med dent, Dr rer nat, PhD

      Affiliations

    • Associate Professor, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Center for Oral and Maxillofacial Medicine, University of Zurich, Zurich, Switzerland
    • Corresponding Author InformationCorresponding author: Dr Jens Fischer, Department of Dental Materials Science, Clinic for Fixed and Removable Prosthodontics, Center for Dental and Oral Medicine, University of Zurich, Plattenstrasse 11, CH-8032 Zurich, SWITZERLAND, Fax: +41 44 634 43 05
  • ,
  • Bogna Stawarczyk, Dipl-Ing MSc

      Affiliations

    • Temporary Head of Materials Science, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Center for Oral and Maxillofacial Medicine, University of Zurich, Zurich, Switzerland
  • ,
  • Irena Sailer, Dr med dent

      Affiliations

    • Associate Professor, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Center for Oral and Maxillofacial Medicine, University of Zurich, Zurich, Switzerland
  • ,
  • Christoph H.F. Hämmerle, Prof Dr med dent

      Affiliations

    • Professor and Chair, Clinic for Fixed and Removable Prosthodontics and Dental Materials Science, Center for Oral and Maxillofacial Medicine, University of Zurich, Zurich, Switzerland

References 

  1. Lin JD , Duh JG . Fracture toughness and hardness of ceria- and yttria-doped tetragonal zirconia ceramics . Mater Chem Phys . 2002;78:253–261
  2. Mangalaraja RV , Chandrasekhar BK , Manohar P . Effect of ceria on the physical, mechanical and thermal properties of yttria stabilized zirconia toughened alumina . Mat Sci Engin . 2003;343:71–75
  3. Cutler RA , Mayhew RJ , Prettyman KM , Virkar AV . High-toughness Ce-TZP/Al2O3 ceramics with improved hardness and strength . J Am Ceram Soc . 1991;74:179–186
  4. Hirano M , Inada H . Fracture toughness, strength and Vickers hardness of yttria-ceria doped tetragonal zirconia/alumina composites fabricated by hot isostatic pressing . J Mater Sci . 1992;27:3511–3518
  5. Nawa M , Nakamoto S , Sekino T , Niihara K . Tough and strong Ce-TZP/alumina nanocomposites doped with titania . Ceram Int . 1998;24:497–506
  6. Tanaka K , Tamura J , Kawanabe K , Nawa M , Oka M , Uchida M , et al.   Ce-TZP/Al2O3 nanocomposite as a bearing material in total joint replacement . J Biomed Mater Res . 2002;63:262–270
  7. Fischer J , Stawarczyk B . Compatibility of machined Ce-TZP/Al2O3 nanocomposite and a veneering ceramic . Dent Mater . 2007;23:1500–1505
  8. Luthardt RG , Sandkuhl O , Reitz B . Zirconia-TZP and alumina–advanced technologies for the manufacturing of single crowns . Eur J Prosthodont Rest Dent . 1999;7:113–119
  9. Aboushelib MN , Kleverlaan CJ , Feilzer AJ . Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics . Dent Mater . 2006;22:857–863
  10. Kosmac T , Oblak C , Jevnikar P , Funduk N , Marion L . Strength and reliability of surface treated Y-TZP dental ceramics . J Biomed Mater Res . 2000;53:304–313
  11. Patil RN , Subbarao EC . Axial thermal expansion of ZrO2 and HfO2 in the range room temperature to 1400°C . J Appl Cryst . 1969;2:281–288
  12. Al-Dohan HM , Yaman P , Dennison JB , Razzoog ME , Lang BR . Shear strength of core-veneer interface in bi-layered ceramics . J Prosthet Dent . 2004;91:349–355
  13. Aboushelib MN , de Jager N , Kleverlaan CJ , Feilzer AJ . Microtensile bond strength of different components of core veneered all-ceramic restorations . Dent Mater . 2005;21:984–991
  14. Fischer J , Grohmann P , Stawarczyk B . Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites . Dent Mater J . 2008;27:448–454
  15. DeHoff PH , Anusavice KJ . Viscoelastic stress analysis of thermally compatible and incompatible metal-ceramic systems . Dent Mater . 1998;14:237–245
  16. DeHoff PH , Anusavice KJ . Viscoelastic finite element stress analysis of the thermal compatibility of dental bilayer ceramic systems . Int J Prosthodont . 2009;22:56–61
  17. Fischer J , Stawarczyk B , Trottmann A , Hämmerle CH . Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks . Dent Mater . 2009;25:326–330

PII: S0022-3913(10)60056-X

doi: 10.1016/S0022-3913(10)60056-X

Journal of Prosthetic Dentistry
Volume 103, Issue 5 , Pages 267-274 , May 2010