Journal of Prosthetic Dentistry
Volume 103, Issue 5 , Pages 275-282 , May 2010

The influence of incisal veneering porcelain thickness of two metal ceramic crown systems on failure resistance after cyclic loading

  • Alessandro Geminiani, DDS

      Affiliations

    • Former postgraduate student, Advanced Education in General Dentistry Program, University of Rochester Eastman Dental Center; currently, postgraduate student, Periodontics Program, University of Rochester Eastman Dental Center, Rochester, NY.
    • ,
  • Heeje Lee, DDS

      Affiliations

    • Assistant Professor, Department of Prosthodontics, Louisiana State University School of Dentistry, New Orleans, La.
    • ,
  • Changyong Feng, PhD

      Affiliations

    • Assistant Professor, Department of Biostatistics and Computational Biology, University of Rochester, Rochester, NY.
    • ,
  • Carlo Ercoli, DDS

      Affiliations

    • Associate Professor, Chair and Program Director, Division of Prosthodontics, University of Rochester, Rochester, NY.
    • Corresponding Author InformationCorresponding author: Dr Carlo Ercoli, Division of Prosthodontics, University of Rochester, Eastman Dental Center, 625 Elmwood Ave, Rochester, NY 14620, Fax: 585-244-8772

References 

  1. Christensen GJ . Longevity of posterior tooth dental restorations . J Am Dent Assoc . 2005;136:201–203
  2. Libby G , Arcuri MR , LaVelle WE , Hebl L . Longevity of fixed partial dentures . J Prosthet Dent . 1997;78:127–131
  3. Walton JN , Gardner FM , Agar JR . A survey of crown and fixed partial denture failures: length of service and reasons for replacement . J Prosthet Dent . 1986;56:416–421
  4. Anderson RJ , Janes GR , Sabella LR , Morris HF . Comparison of the performance on prosthodontic criteria of several alternative alloys used for fixed crown and partial denture restorations: Department of Veterans Affairs Cooperative Studies project 147 . J Prosthet Dent . 1993;69:1–8
  5. Kelly JR . Dental ceramics: current thinking and trends . Dent Clin North Am . 2004;48:513–530 viii
  6. Watson P . Longevity expectations of prosthodontic treatments for dentate and edentulous patients . Int J Prosthodont . 2003;16(Suppl):66–68 discussion 68-70.
  7. Anusavice KJ , Hojjatie B . Stress distribution in metal-ceramic crowns with a facial porcelain margin . J Dent Res . 1987;66:1493–1498
  8. Anusavice KJ , Hojjatie B , Dehoff PH . Influence of metal thickness on stress distribution in metal-ceramic crowns . J Dent Res . 1986;65:1173–1178
  9. Hobo S , Shillingburg HT . Porcelain fused to metal: tooth preparation and coping design . J Prosthet Dent . 1973;30:28–36
  10. Shillingburg HT , Hobo S , Fisher DW . Preparation design and margin distortion in porcelain-fused-to-metal restorations . J Prosthet Dent . 1973;29:276–284
  11. Shillingburg HT , Hobo S , Whitsett LD , Jacobi R , Brackett SE . In: Fundamentals of fixed prosthodontics . 3rd ed.. Chicago: Quintessence; 1997;p. 139–154
  12. Ulusoy M , Toksavul S . Fracture resistance of five different metal framework designs for metal-ceramic restorations . Int J Prosthodont . 2002;15:571–574
  13. Stokes AN , Hood JA . Impact fracture characteristics of intact and crowned human central incisors . J Oral Rehabil . 1993;20:89–95
  14. Smith TB , Kelly JR , Tesk JA . In vitro fracture behavior of ceramic and metal-ceramic restorations . J Prosthodont . 1994;3:138–144
  15. Gibbs CH , Mahan PE , Mauderli A , Lundeen HC , Walsh EK . Limits of human bite strength . J Prosthet Dent . 1986;56:226–229
  16. Helkimo E , Carlsson GE , Helkimo M . Bite force and state of dentition . Acta Odontol Scand . 1977;35:297–303
  17. Kelly JR . Clinically relevant approach to failure testing of all-ceramic restorations . J Prosthet Dent . 1999;81:652–661
  18. Magne P , Kwon KR , Belser UC , Hodges JS , Douglas WH . Crack propensity of porcelain laminate veneers: A simulated operatory evaluation . J Prosthet Dent . 1999;81:327–334
  19. Magne P , Versluis A , Douglas WH . Effect of luting composite shrinkage and thermal loads on the stress distribution in porcelain laminate veneers . J Prosthet Dent . 1999;81:335–344
  20. Rosentritt M , Behr M , Gebhard R , Handel G . Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures . Dent Mater . 2006;22:176–182
  21. White SN , Zhao XY , Zhaokun Y , Li ZC . Cyclic mechanical fatigue of a feldspathic dental porcelain . Int J Prosthodont . 1995;8:413–420
  22. Palmer DS , Barco MT , Billy EJ . Temperature extremes produced orally by hot and cold liquids . J Prosthet Dent . 1992;67:325–327
  23. Shirakura A , Lee H , Geminiani A , Ercoli C , Feng C . The influence of veneering porcelain thickness of all-ceramic and metal ceramic crowns on failure resistance after cyclic loading . J Prosthet Dent . 2009;101:119–127
  24. O'Connor RP , Mackert JR , Myers ML , Parry EE . Castability, opaque masking, and porcelain bonding of 17 porcelain-fused-to-metal alloys . J Prosthet Dent . 1996;75:367–374
  25. Daftary F , Donovan T . Effect of four pretreatment techniques on porcelain-to-metal bond strength . J Prosthet Dent . 1986;56:535–539
  26. Uusalo EK , Lassila VP , Yli-Urpo AU . Bonding of dental porcelain to ceramic-metal alloys . J Prosthet Dent . 1987;57:26–29
  27. Lorenzana RE , Chambless LA , Marker VA , Staffanou RS . Bond strengths of high-palladium content alloys . J Prosthet Dent . 1990;64:677–680
  28. Wood MC , Thompson GA , Agar JR . A comparison of debonding strengths of four metal-ceramic systems with and without opaque porcelain . J Prosthet Dent . 2007;97:141–149
  29. Nelson SJ . In: Wheeler's dental anatomy, physiology, and occlusion . 9th ed.. Philadelphia: Elsevier; 2009;p. 1–19
  30. DeLong R , Douglas WH , Sakaguchi RL , Pintado MR . The wear of dental porcelain in an artificial mouth . Dent Mater . 1986;2:214–219
  31. Stappert CF , Ozden U , Gerds T , Strub JR . Longevity and failure load of ceramic veneers with different preparation designs after exposure to masticatory simulation . J Prosthet Dent . 2005;94:132–139
  32. Dixon DL , Breeding LC , Lilly KR . Use of luting agents with an implant system: Part II . J Prosthet Dent . 1992;68:885–890
  33. Mathews MF , Breeding LC , Dixon DL , Aquilino SA . The effect of connector design on cement retention in an implant and natural tooth-supported fixed partial denture . J Prosthet Dent . 1991;65:822–827
  34. Mansour A , Ercoli C , Graser G , Tallents R , Moss M . Comparative evaluation of casting retention using the ITI solid abutment with six cements . Clin Oral Implants Res . 2002;13:343–348
  35. Mehta CR , Patel NR . Exact logistic regression: theory and examples . Stat Med . 1995;14:2143–2160
  36. Conover WJ , Iman RL . Rank transformations as a bridge between parametric and nonparametric statistics . Am Stat . 1981;35:124–133
  37. Akritas MG . The rank transform method in some two-factor designs . J Am Stat Assoc . 1990;85:73–78
  38. Feng C , Ercoli C , Wang H . A simple nonparametric approach of survival data with two-stage outcomes of different scales . Adv Appl Stat . 2009;12:1–9
  39. Hochberg Y . A sharper Bonferroni procedure for multiple tests of significance . Biometrika . 1988;75:800–802
  40. Simes RJ . An improved Bonferroni procedure for multiple tests of significance . Biometrika . 1986;73:751–754

PII: S0022-3913(10)60058-3

doi: 10.1016/S0022-3913(10)60058-3

Journal of Prosthetic Dentistry
Volume 103, Issue 5 , Pages 275-282 , May 2010

Article Tools

* Image Usage & Resolution