Journal of Prosthetic Dentistry
Volume 104, Issue 2 , Pages 105-113 , August 2010

Two-body wear of different ceramic materials opposed to zirconia ceramic

  • Zakereyya S.M. Albashaireh, BDS, MSc, PhD

      Affiliations

    • Professor, Department of Conservative Dentistry, Jordan University of Science and Technology, Irbid, Jordan
    • Corresponding Author InformationCorresponding author: Dr Zakereyya Albashaireh, Department of Conservative Dentistry, Faculty of Dentistry, Jordan University of Science and Technology, PO Box 3030, Irbid 22110, JORDAN, Fax: +962-2-7279235
  • ,
  • Muhamad Ghazal, DDS

      Affiliations

    • Visiting Assistant Professor, Department of Prosthodontics, Propaedeutics and Dental Materials, School of Dentistry, Christian-Albrechts University at Kiel, Kiel, Germany
  • ,
  • Matthias Kern, Dr med dent, PhD

      Affiliations

    • Professor and Chairman, Department of Prosthodontics, Propaedeutics and Dental Materials, School of Dentistry, Christian-Albrechts University at Kiel, Kiel, Germany

References 

  1. McLean JW . Evolution of dental ceramics in the twentieth century . J Prosthet Dent . 2001;85:61–66
  2. Conrad HJ , Seong WJ , Pesun IJ . Current ceramic materials and systems with clinical recommendations: a systematic review . J Prosthet Dent . 2007;98:389–404
  3. Krejci I , Lutz F , Reimer M . Wear of CAD/CAM ceramic inlays: restorations, opposing cusps, and luting cements . Quintessence Int . 1994;25:199–207
  4. al-Hiyasat AS , Saunders WP , Smith GM . Three-body wear associated with three ceramics and enamel . J Prosthet Dent . 1999;82:476–481
  5. Dong JK , Luthy H , Wohlwend A , Schärer P . Heat-pressed ceramics: technology and strength . Int J Prosthodont . 1992;5:9–16
  6. Cattell MJ , Knowles JC , Clarke RL , Lynch E . The biaxial flexural strength of two pressable ceramic systems . J Dent . 1999;27:183–196
  7. Sorensen JA , Kang SK , Torres TJ , Knode H . In-Ceram fixed partial dentures: three-year clinical trial results . J Calif Dent Assoc . 1998;26:207–214
  8. Sorensen JA , Choi C , Fanuscu MI , Mito WT . IPS Empress crown system: three-year clinical trial results . J Calif Dent Assoc . 1998;26:130–136
  9. Albakry M , Guazzato M , Swain MV . Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials . J Prosthet Dent . 2003;89:374–380
  10. Denry I , Kelly JR . State of the art of zirconia for dental applications . Dent Mater . 2008;24:299–307
  11. Raigrodski AJ . Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature . J Prosthet Dent . 2004;92:557–562
  12. White SN , Miklus VG , McLaren EA , Lang LA , Caputo AA . Flexural strength of a layered zirconia and porcelain dental all-ceramic system . J Prosthet Dent . 2005;94:125–131
  13. Guess PC , Kulis A , Witkowski S , Wolkewitz M , Zhang Y , Strub JR . Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling . Dent Mater . 2008;24:1556–1567
  14. DeLong R , Douglas WH , Sakaguchi RL , Pintado MR . The wear of dental porcelain in an artificial mouth . Dent Mater . 1986;2:214–219
  15. Esquivel-Upshaw JF , Young H , Jones J , Yang M , Anusavice KJ . In vivo wear of enamel by a lithia disilicate-based core ceramic used for posterior fixed partial dentures: first-year results . Int J Prosthodont . 2006;19:391–396
  16. Suputtamongkol K , Anusavice KJ , Suchatlampong C , Sithiamnuai P , Tulapornchai C . Clinical performance and wear characteristics of veneered lithia-disilicate-based ceramic crowns . Dent Mater . 2008;24:667–673
  17. Oh WS , Delong R , Anusavice KJ . Factors affecting enamel and ceramic wear: a literature review . J Prosthet Dent . 2002;87:451–459
  18. Mair LH , Stolarski TA , Vowles RW , Lloyd CH . Wear: mechanisms, manifestations and measurement. Report of a workshop . J Dent . 1996;24:141–148
  19. Lambrechts P , Braem M , Vuylsteke-Wauters M , Vanherle G . Quantitative in vivo wear of human enamel . J Dent Res . 1989;68:1752–1754
  20. Suzuki S , Suzuki SH , Cox CF . Evaluating the antagonistic wear of restorative materials when placed against human enamel . J Am Dent Assoc . 1996;127:74–80
  21. Kern M . Clinical long-term survival of two-retainer and single-retainer all-ceramic resin-bonded fixed partial dentures . Quintessence Int . 2005;36:141–147
  22. Ghazal M , Kern M . The influence of antagonistic surface roughness on the wear of human enamel and nanofilled composite resin artificial teeth . J Prosthet Dent . 2009;101:342–349
  23. Mahalick JA , Knap FJ , Weiter EJ . Occusal wear in prosthodontics . J Am Dent Assoc . 1971;82:154–159
  24. Baran G , Boberick K , McCool J . Fatigue of restorative materials . Crit Rev Oral Biol Med . 2001;12:350–360
  25. Kunzelmann KH , Jelen B , Mehl A , Hickel R . Wear evaluation of MZ100 compared to ceramic CAD/CAM materials . Int J Comput Dent . 2001;4:171–184
  26. Ramp MH , Suzuki S , Cox CF , Lacefield WR , Koth DL . Evaluation of wear: enamel opposing three ceramic materials and a gold alloy . J Prosthet Dent . 1997;77:523–530
  27. Yip KH , Smales RJ , Kaidonis JA . Differential wear of teeth and restorative materials: clinical implications . Int J Prosthodont . 2004;17:350–356
  28. Ghazal M , Yang B , Ludwig K , Kern M . Two-body wear of resin and ceramic denture teeth in comparison to human enamel . Dent Mater . 2008;24:502–507
  29. Heintze SD , Cavalleri A , Forjanic M , Zellweger G , Rousson V . Wear of ceramic and antagonist–a systematic evaluation of influencing factors in vitro . Dent Mater . 2008;24:433–449
  30. Heintze SD , Zappini G , Rousson V . Wear of ten dental restorative materials in five wear simulators–results of a round robin test . Dent Mater . 2005;21:304–317
  31. Heintze SD . How to qualify and validate wear simulation devices and methods . Dent Mater . 2006;22:712–734
  32. Yap AU , Wee KE , Teoh SH , Chew CL . Influence of thermal cycling on OCA wear of composite restoratives . Oper Dent . 2001;26:349–356
  33. Wassell RW , McCabe JF , Walls AW . A two-body frictional wear test . J Dent Res . 1994;73:1546–1553
  34. Heintze SD , Zellweger G , Cavalleri A , Ferracane J . Influence of the antagonist material on the wear of different composites using two different wear simulation methods . Dent Mater . 2006;22:166–175
  35. Wassell RW , McCabe JF , Walls AW . Wear characteristics in a two-body wear test . Dent Mater . 1994;10:269–274
  36. Stober T , Lutz T , Gilde H , Rammelsberg P . Wear of resin denture teeth by two-body contact . Dent Mater . 2006;22:243–249
  37. O'Kray HP , O'Brien WJ . In vitro human enamel wear by a hydrated high-alkali porcelain . Quintessence Int . 2005;36:617–622
  38. Ghazal M , Albashaireh ZS , Kern M . Wear resistance of nanofilled composite resin and feldspathic ceramic artificial teeth . J Prosthet Dent . 2008;100:441–448
  39. Ghazal M , Kern M . Wear of human enamel and nano-filled composite resin denture teeth under different loading forces . J Oral Rehabil . 2009;36:58–64
  40. DeLong R , Douglas WH , Sakaguchi RL , Pintado MR . The wear of dental porcelain in an artificial mouth . Dent Mater . 1986;2:214–219
  41. Scurria MS , Powers JM . Surface roughness of two polished ceramic materials . J Prosthet Dent . 1994;71:174–177
  42. Sarac D , Sarac YS , Yuzbasioglu E , Bal S . The effects of porcelain polishing systems on the color and surface texture of feldspathic porcelain . J Prosthet Dent . 2006;96:122–128
  43. Kern M , Strub JR , Lü XY . Wear of composite resin veneering materials in a dual-axis chewing simulator . J Oral Rehabil . 1999;26:372–378
  44. DeLong R . Intra-oral restorative materials wear: rethinking the current approaches: how to measure wear . Dent Mater . 2006;22:702–711
  45. Gibbs CH , Mahan PE , Lundeen HC , Brehnan K , Walsh EK , Holbrook WB . Occlusal forces during chewing and swallowing as measured by sound transmission . J Prosthet Dent . 1981;46:443–449

PII: S0022-3913(10)60102-3

doi: 10.1016/S0022-3913(10)60102-3

Journal of Prosthetic Dentistry
Volume 104, Issue 2 , Pages 105-113 , August 2010