Journal of Prosthetic Dentistry
Volume 76, Issue 3 , Pages 246-249 , September 1996

Tensile bond strength of a resinous cement to a nickel-chromium alloy modified with five surface treatments

  • Claudia Mendonsa Pinto Coelho, DDS (Resident)

      Affiliations

    • Hospital of Rehabilitation, Faculty of Odontology-Bauru, University of Sao Paulo, Sao Paulo, Brazil.
    • ,
  • Jose Henrique Rubo, DDS (Assistant Professor)

      Affiliations

    • Corresponding Author InformationReprint requests to: Dr. Jose Henrique Rubo Al. Otavio P. Brisola, 9-75 17043-101 — Bauru Sao Paulo, Brazil
    • Department of Prosthodontics, Dental School. Faculty of Odontology-Bauru, University of Sao Paulo, Sao Paulo, Brazil.
    • ,
  • Luiz Fernando Pegoraro, DDS (Associate Professor)

      Affiliations

    • Department of Prosthodontics, Dental School. Faculty of Odontology-Bauru, University of Sao Paulo, Sao Paulo, Brazil.

References 

  1. Omura J, Yamauchi J, Harada I, Wada T. Adhesive and mechanical properties of a new dental adhesive [Abstract]. J Dent Res. 1984;63:233
  2. Pegoraro LF, Barrack G. A comparison of bond strengths of adhesive cast restorations using different designs, bonding agents, and luting resins. J Prosthet Dent. 1987;57:133–138
  3. Tanaka T, Fujiyama E, Shimizu H, Takaki A, Atsuta M. Surface treatment of nonprecious alloys for adhesion-fixed partial dentures. J Prosthet Dent. 1986;55:456–462
  4. Wiltshire WA. Tensile bond strengths of various alloy surface treatments for resin bonded bridges. Quintessence Dent Tech. 1986;10:227–232
  5. Kohli S, Levine WA, Grisius RJ, Fenster RK. The effect of three different surface treatments on the tensile strength of the resin bond to nickel-chromium-beryllium alloy. J Prosthet Dent. 1990;63:4–8
  6. Caeg C, Leinfelder KF, Lacefield WR, Bell W. Effectiveness of a method used in bonding resins to metal. J Prosthet Dent. 1990;64:37–41
  7. Lin TH, Chang HJ, Chung KH. Interfacial strengths of various alloy surface treatments for resin-bonded fixed partial dentures. J Prosthet Dent. 1990;64:158–162
  8. Turner CH, Sinclair L. Sprayed opaque porcelain as a retentive surface for resin-bonded restorations. Int J Prosthodont. 1990;3:384–390
  9. Kolodney H, Puckett AD, Breazeale MS, Patterson KL, Lentz DL. Shear bond strengths of prosthodontic adhesive systems to a nickelchromium-beryllium alloy. Quintessence Int. 1992;23:65–69
  10. Barrack G. Recents advances in etched cast restorations. J Prosthet Dent. 1984;52:619–626
  11. Re GJ, Kaiser DA, Malone WF, Garcia-Godoy F. Shear bond strengths and scanning electron microscope evaluation of three different retentive methods for resin-bonded retainers. J Prosthet Dent. 1988;59:568–573
  12. Hill GL, Zidan O, Gomez-Marin O. Bond strengths of etched base metals: effects of errors in surface area estimation. J Prosthet Dent. 1986;56:41–46
  13. Rubo JH, Pegoraro LF. Tensile bond strength of a composite resin cement for bonded prosthesis to various dental alloys. J Prosthet Dent. 1995;74:230–234
  14. Neter J, Wasserman W, Kutner MH. Applied linear statistic model. In: 2nd ed.. Homewood, Ill: Irwin; 1985;p. 574

PII: S0022-3913(96)90166-3

Journal of Prosthetic Dentistry
Volume 76, Issue 3 , Pages 246-249 , September 1996

Article Tools