« Previous
Next »
Journal of Prosthetic Dentistry
Volume 75, Issue 5
, Pages 506-511
, May 1996
Retention and failure mode after cyclic loading in two post and core systems
References
- . Immediate restoration of pulpless teeth. J Prosthet Dent. 1972;28:607–612
- . Post and core systems: Which one is best?. J Prosthet Dent. 1982;48:27–38
- . A comparative study of restorative techniques for pulpless teeth. J Prosthet Dent. 1977;38:405–412
- . The effect of post adaptation in the root canal on retention of posts cemented with various cements. Aust Dent J. 1993;38:39–45
-
.
Retention of post crowns. An assessment of the relative efficiency of posts of different shapes and sizes.
Br Dent J. 1968;124:63–69
- . Retentive properties of post and core systems. J Prosthet Dent. 1976;36:636–643
- . Factors influencing the retention of dowels. J Prosthet Dent. 1977;38:515–525
- . Retentive properties of some simplified dowelcore systems to cast gold dowel and core. J Prosthet Dent. 1983;50:203–206
- . Endodontic dowel retention with resinous cements. J Prosthet Dent. 1992;68:913–917
- . Comparison of retentive properties of dowel forms after application of intermittent torsional forces. J Prosthet Dent. 1984;52:238–242
- . Analysis of stress distribution by endodontic posts. Oral Surg Oral Med Oral Pathol. 1972;33:952–960
- . Effect of various cementation methods on the retention of prefabricated posts. J Prosthet Dent. 1987;58:309–313
-
.
Gnathodynamics. The measurement of biting forces with a new design of gnathodynamometer.
Aust Dent J. 1939;43:381–393
-
.
A textbook of occlusion.
In: Chicago: Quintessence Publ Co; 1988;p. 143–152
-
.
Restorative dental materials.
In: 4th ed.. St Louis: C V Mosby; 1971;p. 49–89
-
.
Shidaichikuzoyo kisei posuto ni kansuru kenkyu dai 1 ho te-pa-posuto ni tsuite
(A study on prefabrioated posts—Part 1: Retention of tapered posts),
Tsurumi Shigaka. (Tsurumi Univ Dent J), 1988;14:483–489
- . Retention of endodontic dowels: effects of cement, dowel length, diameter, and design. J Prosthet Dent. 1978;39:401–405
- . Effect of surface design on retention of dowels cemented with a resin. J Prosthet Dent. 1993;70:403–405
- . Clinically significant factors in dowel design. J Prosthet Dent. 1984;52:28–35
- . Retention of dowels subjected to tensile and torsional forces. J Prosthet Dent. 1976;41:159–162
- . Effects of cement type and thickness on retention of serrated pins. J Dent Res. 1975;54:227–231
- . The retention of dental posts. J Dent. 1982;10:154–165
- . Influence of types and surface treatment of dental alloy and film thickness of cements on bond strength of dental luting cements. Shika Zairyo Kikai. (J Jpn Soc Dent Mater Devices), 1990;9:786–805
- . Factors influencing the retention of cemented gold castings. J Prosthet Dent. 1961;11:487–502
-
.
Optimum film thickness for maximum shear resistance between teeth and restorations.
Bull Tokyo Med Dent Univ. 1961;8:147–164
- . The relationship between the film thickness of zinc phosphate cement and the retention of veneer crowns. Acta Odontol Scand. 1968;26:169–175
- . Relationship between retention and convergence angle in cemented veneer crowns. Acta Odontol Scand. 1955;13:35–40
- . The influence of surface roughness on the retentive ability of two dental luting cements. J Oral Rehabil. 1978;5:377–389
- . The retentive and stress distributing properties of split threaded endodontic dowels. J Prosthet Dent. 1992;68:436–442
- . Comparison of the retention of endodontic posts after preparation with EDTA. J Prosthet Dent. 1993;69:262–266
PII: S0022-3913(96)90454-0
« Previous
Next »
Journal of Prosthetic Dentistry
Volume 75, Issue 5
, Pages 506-511
, May 1996

