Advertisement
Journal of Prosthetic Dentistry

Influence of surface sealant agents on the surface roughness and color stability of artificial teeth

      Abstract

      Statement of problem

      Although various surface sealant agents are available and recommended for chairside polishing procedures, their effect on the surface roughness and color stability of denture teeth is not clear.

      Purpose

      The purpose of this in vitro study was to evaluate the effect of sealant agents on the surface roughness and color stability of various denture tooth materials.

      Material and methods

      Eighty disk-shaped specimens were prepared for each type of denture tooth material (SR Vivodent, PMMA; Vitapan, reinforced-PMMA; SR Phonares II, composite resin). The specimens were assigned to 4 groups according to the surface treatment used (n=20): surface sealant agents (Palaseal; Heraeus Kulzer GmbH, Optiglaze; GC Corp Biscover; Bisco Inc) and a conventional laboratory polishing technique (control group). A thermal cycling procedure was applied for half of the specimens (n=10). The surface roughness (Ra) values of thermocycled and nonthermocycled specimens were measured with a profilometer. The CIELab color parameters of both thermocycled and nonthermocycled specimens were measured with a spectrophotometer at baseline and after 7-day storage in a coffee solution. The color differences were calculated from the CIEDE2000 (ΔE00) formula. Data were statistically analyzed with 3-way ANOVA and the Tukey HSD test (α=.05).

      Results

      The type of tooth material, surface treatment technique, and their interactions were significant for Ra values, and each variable and their interactions were also significant for ΔE00 values (P<.05). Thermal cycling had a significant effect only on ΔE00 values (P<.05).

      Conclusions

      Palaseal and Optiglaze sealant agents provided smoother and more color-stable denture tooth surfaces than the conventional polishing technique. The use of the Biscover agent with SR Vivodent and Phonares II teeth increased the Ra values. The color of conventionally polished SR Vivodent and Phonares II teeth changed more with thermal cycling.
      To read this article in full you will need to make a payment

      Purchase one-time access:

      Academic & Personal: 24 hour online accessCorporate R&D Professionals: 24 hour online access
      One-time access price info
      • For academic or personal research use, select 'Academic and Personal'
      • For corporate R&D use, select 'Corporate R&D Professionals'

      Subscribe:

      Subscribe to Journal of Prosthetic Dentistry
      Already a print subscriber? Claim online access
      Already an online subscriber? Sign in
      Institutional Access: Sign in to ScienceDirect

      References

        • Quirynen M.
        • van der Mei H.C.
        • Bollen C.M.
        • Schotte A.
        • Marechal M.
        • Doornbusch G.I.
        • et al.
        An in vivo study of the influence of the surface roughness of implants on the microbiology of supra- and subgingival plaque.
        J Dent Res. 1993; 72: 1304-1309
        • Borchers L.
        • Tavassol F.
        • Tschernitschek H.
        Surface quality achieved by polishing and by varnishing of temporary crown and fixed partial denture resins.
        J Prosthet Dent. 1999; 82: 550-556
        • Sen D.
        • Göller G.
        • Işsever H.
        The effect of two polishing pastes on the surface roughness of bis-acryl composite and methacrylate-based resins.
        J Prosthet Dent. 2002; 88: 527-532
        • Kuhar M.
        • Funduk N.
        Effects of polishing techniques on the surface roughness of acrylic denture base resins.
        J Prosthet Dent. 2005; 93: 76-85
        • Hahnel S.
        • Rosentritt M.
        • Bürgers R.
        • Handel G.
        Adhesion of Streptococcus mutans NCTC 10449 to artificial teeth: an in vitro study.
        J Prosthet Dent. 2008; 100: 309-315
        • Ferracane J.L.
        • Condon J.R.
        • Mitchem J.C.
        Evaluation of subsurface defects created during the finishing of composites.
        J Dent Res. 1992; 71: 1628-1632
        • Ghazal M.
        • Kern M.
        The influence of antagonistic surface roughness on the wear of human enamel and nanofilled composite resin artificial teeth.
        J Prosthet Dent. 2009; 101: 342-349
        • Bollen C.M.
        • Papaioanno W.
        • Van Eldere J.
        • Schepers E.
        • Quirynen M.
        • van Steenberghe D.
        The influence of abutment surface roughness on plaque accumulation and peri-implant mucositis.
        Clin Oral Implants Res. 1996; 7: 201-211
        • Tanaka R.
        • Kurogi T.
        • Murata H.
        Effect of melamine foam cleaning on the surface condition of composite resin artificial teeth.
        J Prosthodont. 2013; 22: 626-632
        • Assunção W.G.
        • Barão V.A.
        • Pita M.S.
        • Goiato M.C.
        Effect of polymerization methods and thermal cycling on color stability of acrylic resin denture teeth.
        J Prosthet Dent. 2009; 102: 385-392
        • Mutlu-Sagesen L.
        • Ergün G.
        • Ozkan Y.
        • Bek B.
        Color stability of different denture teeth materials: an in vitro study.
        J Oral Sci. 2001; 43: 193-205
        • Koksal T.
        • Dikbas I.
        Color stability of different denture teeth materials against various staining agents.
        Dent Mater J. 2008; 27: 139-144
        • Imamura S.
        • Takahashi H.
        • Hayakawa I.
        • Loyaga-Rendon P.G.
        • Minakuchi S.
        Effect of filler type and polishing on the discoloration of composite resin artificial teeth.
        Dent Mater J. 2008; 27: 802-808
        • O'Donnell E.F.
        • Radford D.R.
        • Sinclair G.F.
        • Clark R.K.
        Chairside polishing of heat-cured acrylic resin: an SEM and EDA study.
        Int J Prosthodont. 2003; 16: 233-238
        • Sarac D.
        • Sarac Y.S.
        • Kulunk S.
        • Ural C.
        • Kulunk T.
        The effect of polishing techniques on the surface roughness and color change of composite resins.
        J Prosthet Dent. 2006; 96: 33-40
        • Güler A.U.
        • Güler E.
        • Yücel A.C.
        • Ertaş E.
        Effects of polishing procedures on color stability of composite resins.
        J Appl Oral Sci. 2009; 17: 108-112
        • Gönülol N.
        • Yilmaz F.
        The effects of finishing and polishing techniques on surface roughness and color stability of nano composites.
        J Dent. 2012; 40: 64-70
        • Manabe A.
        • Kato Y.
        • Finger W.J.
        • Kanehira M.
        • Komatsu M.
        Discoloration of coating resins exposed to staining solutions in vitro.
        Dent Mater J. 2009; 28: 338-343
        • Bertrand M.F.
        • Leforestier E.
        • Muller M.
        • Lupi-Pégurier L.
        • Bolla M.
        Effect of surface penetrating sealant on surface texture and microhardness of composite resins.
        J Biomed Mater Res. 2000; 53: 658-663
        • Dickinson G.L.
        • Leinfelder K.F.
        Assessing the long-term effect of a surface penetrating sealant.
        J Am Dent Assoc. 1993; 124: 68-72
        • Doray P.G.
        • Eldiwany M.S.
        • Powers J.M.
        Effect of resin surface sealers on improvement of stain resistance for a composite provisional material.
        J Esthet Restor Dent. 2003; 15: 244-250
        • Paravina R.D.
        • Powers J.M.
        Esthetic color training in dentistry.
        1st ed. Mosby, St Louis2004: p.3-p.47
        • Rosenstiel S.F.
        • Land M.F.
        • Fujimoto J.
        Color science, esthetic and shade selection.
        in: Contemporary fixed prosthodontics. 4th ed. Mosby, St. Louis2006: p.594-p.596
      1. CIE Technical Report: Colorimetry. CIE pub no. 15.3. CIE Central Bureau, Vienna, Austria2004
        • Ghinea R.
        • Pérez M.M.
        • Herrera L.J.
        • Rivas M.J.
        • Yebra A.
        • Paravina R.D.
        Color difference thresholds in dental ceramics.
        J Dent. 2010; 38: 57-64
        • Kürklü D.
        • Azer S.S.
        • Yilmaz B.
        • Johnston W.M.
        Porcelain thickness and cement shade effects on the colour and translucency of porcelain veneering materials.
        J Dent. 2013; 41: 1043-1050
        • Lee Y.K.
        Comparison of CIELAB DeltaE (*) and CIEDE2000 color-differences after polymerization and thermocycling of resin composites.
        Dent Mater. 2005; 21: 678-682