Advertisement
Journal of Prosthetic Dentistry

Effect of silver diamine fluoride on the surface roughness of dental ceramics

Published:November 10, 2022DOI:https://doi.org/10.1016/j.prosdent.2022.10.001

      Abstract

      Statement of problem

      Application of silver diamine fluoride (SDF) can be a straightforward and efficient way to manage recurrent caries around the margins of crowns. However, its effect on ceramic surfaces is unknown.

      Purpose

      The purpose of this in vitro study was to evaluate and compare the effect of SDF, acidulated phosphate fluoride (APF), and distilled water on the surface roughness of dental ceramics.

      Material and methods

      Forty-five rectangles (10×10×2 mm) each of 5% yttria-stabilized tetragonal zirconia polycrystal (5Y-TZP) zirconia (Zir), lithium disilicate (LDS), overglazed feldspathic porcelain (FO), and polished feldspathic porcelain (FP) were fabricated. The specimens were treated with 38% SDF, 1.23% APF, and distilled water to simulate 3 years of topical applications. The surface roughness (Ra) of each rectangle was measured with a profilometer before and after treatment with the solutions, and the change in Ra (△Ra) was calculated. Scanning electron microscope images were obtained of each treatment group. Multiple comparison of the means among the ceramics and testing solutions was done using 2-way ANOVA followed by the Tukey Honestly Significant test (α=.05).

      Results

      ANOVA revealed significant differences in the 2 main factors, as well as their interaction (P<.001). The surface roughness of the treated rectangles was significantly dependent on the type of ceramic and the testing solution. The greatest surface roughness increase was seen in the interaction of LDS:APF (△Ramean=0.51 ±0.13 μm), closely followed by FO:APF (△Ramean=0.49 ±0.20 μm) and FP:APF (△Ramean=0.41 ±0.17 μm) (P<.001). SDF increased the surface roughness of LDS, FO, and FP; however, the increase was not significant (△Ramean LDS=0.25 ±0.11 μm; △Ramean FO=0.17 ±0.16 μm; △Ramean FP=.1 ±0.14 μm; P >.118). None of the solutions had any effect on zirconia (P>.977).

      Conclusions

      SDF is safe to use around zirconia restorations. Long-term and repeated application of SDF on lithium disilicate and feldspathic porcelain must be considered with caution.
      To read this article in full you will need to make a payment

      Purchase one-time access:

      Academic & Personal: 24 hour online accessCorporate R&D Professionals: 24 hour online access
      One-time access price info
      • For academic or personal research use, select 'Academic and Personal'
      • For corporate R&D use, select 'Corporate R&D Professionals'

      Subscribe:

      Subscribe to Journal of Prosthetic Dentistry
      Already a print subscriber? Claim online access
      Already an online subscriber? Sign in
      Institutional Access: Sign in to ScienceDirect

      References

        • Rošin-Grget K.
        • Peroš K.
        • Sutej I.
        • Bašić K.
        The cariostatic mechanisms of fluoride.
        Acta Med Acad. 2013; 42: 179-188
        • Lo E.C.
        • Chu C.H.
        • Lin H.C.
        A community-based caries control program for pre-school children using topical fluorides: 18-month results.
        J Dent Res. 2001; 80: 2071-2074
        • Gao S.
        • Zhao I.
        • Hiraishi N.
        • Duangthip D.
        • Mei M.
        • Lo E.
        • et al.
        Clinical Trials of Silver Diamine Fluoride in Arresting Caries among Children.
        JDR Clinical & Translational Research. 2016; 1: 201-210
        • Gold J.
        Silver diamine fluoride may prevent and arrest root caries in older adults.
        J Evid Based Dent Pract. 2019; 19: 186-188
        • Copps D.P.
        • Lacy A.M.
        • Curtis T.
        • Carman J.E.
        Effects of topical fluorides on five low-fusing dental porcelains.
        J Prosthet Dent. 1984; 52: 340-343
        • Jones D.A.
        Effects of topical fluoride preparations on glazed porcelain surfaces.
        J Prosthet Dent. 1985; 53: 483-484
        • Wunderlich R.C.
        • Yaman P.
        In vitro effect of topical fluoride on dental porcelain.
        J Prosthet Dent. 1986; 55: 385-388
        • Kula K.
        • Kula T.J.
        The effect of topical APF foam and other fluorides on veneer porcelain surfaces.
        Pediatr Dent. 1995; 17: 356-361
        • Anusavice K.J.
        Degradability of dental ceramics.
        Adv Dent Res. 1992; 6: 82-89
        • Vechiato-Filho A.J.
        • Dos Santos D.M.
        • Goiato M.C.
        • Moreno A.
        • De Medeiros R.A.
        • Kina S.
        • et al.
        Surface degradation of lithium disilicate ceramic after immersion in acid and fluoride solutions.
        Am J Dent. 2015; 28: 174-180
        • Vanderlei A.D.
        • Passos S.P.
        • Salazar-Marocho S.M.
        • Pereira S.M.
        • Vásquez V.Z.
        • Bottino M.A.
        Effect of bleaching agent on dental ceramics roughness.
        Acta Odontol Latinoam. 2010; 23: 257-264
        • Butler C.J.
        • Masri R.
        • Driscoll C.F.
        • Thompson G.A.
        • Runyan D.A.
        • Anthony von Fraunhofer J.
        Effect of fluoride and 10% carbamide peroxide on the surface roughness of low-fusing and ultra low-fusing porcelain.
        J Prosthet Dent. 2004; 92: 179-183
        • Artopoulou II,
        • Powers J.M.
        • Chambers M.S.
        In vitro staining effects of stannous fluoride and sodium fluoride on ceramic material.
        J Prosthet Dent. 2010; 103: 163-169
        • Smielak B.
        • Klimek L.
        Effect of hydrofluoric acid concentration and etching duration on select surface roughness parameters for zirconia.
        J Prosthet Dent. 2015; 113: 596-602
        • Brudevold F.
        • Savory A.
        • Gardner D.E.
        • Spinelli M.
        • Speirs R.
        A study of acidulated fluoride solutions—I.
        Arch Oral Biol. 1963; 8: 167-177
        • Palmer W.G.
        CCXVI.—The action of aqueous hydrofluoric acid on silica.
        J Chem Soc. 1930; 0: 1656-1664
        • Mei M.L.
        • Chu C.H.
        • Lo E.C.M.
        • Samaranayake L.P.
        Fluoride and silver concentrations of silver diammine fluoride solutions for dental use.
        Int J Paediatr Dent. 2013; 23: 279-285
        • Safety Data Sheet
        Elevateoralcare.com. [cited 2022 Jul 12].
        (Available at:)
        • Esquivel-Upshaw J.F.
        • Dieng F.Y.
        • Clark A.E.
        • Neal D.
        • Anusavice K.J.
        Surface degradation of dental ceramics as a function of environmental pH.
        J Dent Res. 2013; 92: 467-471
        • Miller D.B.
        A new protocol and standard of care for managing open crown margins.
        Gen Dent. 2019; 67: 19-22
        • Weyant R.J.
        • Tracy S.L.
        • Anselmo T.T.
        • Beltrán-Aguilar E.D.
        • Donly K.J.
        • Frese W.A.
        • et al.
        Topical fluoride for caries prevention: executive summary of the updated clinical recommendations and supporting systematic review.
        J Am Dent Assoc [Internet]. 2013; 144: 1279-1291
        • Crystal Y.O.
        • Niederman R.
        Silver diamine fluoride treatment considerations in children’s caries management.
        Pediatr Dent. 2016; 38: 466-471
      1. Mitutoyo Portable Surface Roughness Tester Surftest SJ-210/310 Series [Online]. 2021 Dec [cited 2022 Jul 12].
        (Available at:)
        • Kawai K.
        • Urano M.
        • Ebisu S.
        Effect of surface roughness of porcelain on adhesion of bacteria and their synthesizing glucans.
        J Prosthet Dent. 2000; 83: 0664-0667
        • Jager D.
        • Feilzer N.
        • Davidson A.J.
        The influence of surface roughness on porcelain strength.
        Dental Materials. 2000; 16: 381-388
        • Jagger D.C.
        • Harrison A.
        An in vitro investigation into the wear effects of unglazed, glazed, and polished porcelain on human enamel.
        J Prosthet Dent. 1994; 72: 320-323
        • Schestatsky R.
        • Zucuni C.P.
        • Venturini A.B.
        • de Lima Burgo T.A.
        • Bacchi A.
        • Valandro L.F.
        • et al.
        CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: Fatigue performance and ceramic surface characteristics.
        J Mech Behav Biomed Mater. 2019; 94: 144-154