Advertisement
Journal of Prosthetic Dentistry

Use of an optical jaw-tracking system to record mandibular motion for treatment planning and designing interim and definitive prostheses: A dental technique

Published:December 11, 2022DOI:https://doi.org/10.1016/j.prosdent.2022.08.036

      Abstract

      Optical jaw-tracking systems can record mandibular motion during the various treatment phases. Also, computer-aided design programs facilitate the integration of a patient’s digital information, including recorded mandibular motion, into the design of interim and definitive prostheses. A technique to fabricate a complete mouth implant-supported rehabilitation by using mandibular motion captured with an optical jaw-tracking system is described. The mandibular motion recordings obtained before the treatment are combined with the interim restorations to perform a diagnostic waxing, design the computer-guided implant plan, and fabricate maxillary and mandibular screw-retained implant-supported interim and definitive prostheses. The process allows occlusal adjustments by using the patient’s mandibular motion and facilitates the prosthetic design process, minimizing chair time at delivery.
      To read this article in full you will need to make a payment

      Purchase one-time access:

      Academic & Personal: 24 hour online accessCorporate R&D Professionals: 24 hour online access
      One-time access price info
      • For academic or personal research use, select 'Academic and Personal'
      • For corporate R&D use, select 'Corporate R&D Professionals'

      Subscribe:

      Subscribe to Journal of Prosthetic Dentistry
      Already a print subscriber? Claim online access
      Already an online subscriber? Sign in
      Institutional Access: Sign in to ScienceDirect

      References

        • Goldstein R.E.
        Esthetics in Dentistry.
        in: Principles, communication, treatment methods. ed 2. vol 1. BC Decker, Ontario1998: 3-51
        • Chiche G.J.
        • Pinault A.
        Esthetics of anterior fixed prosthodontics.
        Quintessence, Chicago1996: 33-50
        • Rufenacht C.R.
        Fundamentals of esthetics.
        Quintessence, Chicago1990: 205-241
        • Spear F.M.
        • Kokich V.G.
        A multidisciplinary approach to esthetic dentistry.
        Dent Clin North Am. 2007; 51: 487-505
      1. The glossary of prosthodontic terms: 9th Edition.
        J Prosthet Dent. 2017; 117: e1-e105
        • Shillingburg Jr., H.T.
        • Sather D.A.
        • Wilson E.L.
        • Cain J.E.
        • Mitchell D.L.
        • Blanco L.J.
        • et al.
        Fundamentals of fixed prosthodontics.
        Quintessence, Chicago1996: 33-47
        • Rosenstiel S.F.
        • Land M.F.
        • Fujimoto J.
        Contemporary fixed prosthodontics.
        5th ed. Mosby/Elsevier, St. Louis2015: 22-56
        • Piedra-Cascón W.
        • Fountain J.
        • Att W.
        • Revilla-León M.
        2D and 3D patient's representation of simulated restorative esthetic outcomes using different computer-aided design software programs.
        J Esthet Restor Dent. 2021; 33: 143-151
        • Mangano C.
        • Luongo F.
        • Migliario M.
        • Mortellaro C.
        • Mangano F.G.
        Combining intraoral scans, cone beam computed tomography and face scans: The virtual patient.
        J Craniofac Surg. 2018; 29: 2241-2246
        • Hassan B.
        • Gimenez Gonzalez B.
        • Tahmaseb A.
        • Greven M.
        • Wismeijer D.
        A digital approach integrating facial scanning in a CAD-CAM workflow for complete-mouth implant-supported rehabilitation of patients with edentulism: A pilot clinical study.
        J Prosthet Dent. 2017; 117: 486-492
        • Cascón W.P.
        • de Gopegui J.R.
        • Revilla-León M.
        Facially generated and additively manufactured baseplate and occlusion rim for treatment planning a complete-arch rehabilitation: A dental technique.
        J Prosthet Dent. 2019; 121: 741-745
        • Revilla-León M.
        • Zandinejad A.
        • Nair M.K.
        • Barmak B.A.
        • Feilzer A.J.
        • Özcan M.
        Accuracy of a patient 3-dimensional virtual representation obtained from the superimposition of facial and intraoral scans guided by extraoral and intraoral scan body systems.
        J Prosthet Dent. 2021;
        • Pérez-Giugovaz M.G.
        • Meykadeh Z.
        • Revilla-León M.
        Additively manufactured scan bodies for virtual patient integration: different designs, manufacturing procedures, and clinical protocols.
        J Prosthodont. 2022; 31: 23-29
        • Röhrle O.
        • Waddell J.N.
        • Foster K.D.
        • Saini H.
        • Pullan A.J.
        Using a motion-capture system to record dynamic articulation for application in CAD/CAM software.
        J Prosthodont. 2009; 18: 703-710
        • Kwon J.H.
        • Im S.
        • Chang M.
        • Kim J.E.
        • Shim J.S.
        A digital approach to dynamic jaw tracking using a target tracking system and a structured-light three-dimensional scanner.
        J Prosthodont Res. 2019; 63: 115-119
        • Bapelle M.
        • Dubromez J.
        • Savoldelli C.
        • Tillier Y.
        • Ehrmann E.
        Modjaw® device: Analysis of mandibular kinematics recorded for a group of asymptomatic subjects.
        Cranio. 2021; 1–7
        • Li W.
        • Li L.
        • Wang Y.
        • Sun Y.
        • Xie Q.
        Accuracy of recording edentulous jaw relations by using an optical jaw tracking system: An in vitro study.
        Int J Prosthodont. 2022; 35: 302-310
        • Li Q.
        • Bi M.
        • Yang K.
        • Liu W.
        The creation of a virtual dental patient with dynamic occlusion and its application in esthetic dentistry.
        J Prosthet Dent. 2021; 126: 14-18
        • Wang J.
        • Jin C.
        • Dong B.
        • Yue L.
        • Gao S.
        Fully digital workflow for replicating treatment dentures: A technique for jaw relation transfer and dynamic occlusal adjustment.
        J Prosthet Dent. 2021;
        • Li L.
        • Chen H.
        • Li W.
        • Wang Y.
        • Sun Y.
        Design of wear facets of mandibular first molar crowns by using patient-specific motion with an intraoral scanner: A clinical study.
        J Prosthet Dent. 2021;
        • Revilla-León M.
        • Jiang P.
        • Sadeghpour M.
        • Piedra-Cascón W.
        • Zandinejad A.
        • Özcan M.
        • et al.
        Intraoral digital scans-Part 1: Influence of ambient scanning light conditions on the accuracy (trueness and precision) of different intraoral scanners.
        J Prosthet Dent. 2020; 124: 372-378
        • Revilla-León M.
        • Subramanian S.G.
        • Att W.
        • Krishnamurthy V.R.
        Analysis of different illuminance of the room lighting condition on the accuracy (trueness and precision) of an intraoral scanner.
        J Prosthodont. 2021; 30: 157-162
        • Revilla-León M.
        • Subramanian S.G.
        • Özcan M.
        • Krishnamurthy V.R.
        Clinical study of the influence of ambient light scanning conditions on the accuracy (trueness and precision) of an intraoral scanner.
        J Prosthodont. 2020; 29: 107-113
        • Revilla-León M.
        • Gohil A.
        • Barmak A.B.
        • Gómez-Polo M.
        • Pérez-Barquero J.A.
        • Att W.
        • et al.
        Influence of ambient temperature changes on intraoral scanning accuracy.
        J Prosthet Dent. 2022;
        • Long J.H.
        Locating centric relation with a leaf gauge.
        J Prosthet Dent. 1973; 29: 608-610
        • Nakamura K.
        • Minami I.
        • Wada J.
        • Ikawa Y.
        • Wakabayashi N.
        Head position affects the direction of occlusal force during tapping movement.
        J Oral Rehabil. 2018; 45: 363-370
        • Coelho M.F.
        • Cavalcanti Bd
        • Claro Neves A.C.
        • Jóias R.P.
        • Rode Sde M.
        Influence of dental chair backrest inclination on the registration of the mandibular position.
        J Prosthet Dent. 2015; 114: 693-695
        • van't Spijker A.
        • Creugers N.H.
        • Bronkhorst E.M.
        • Kreulen C.M.
        Body position and occlusal contacts in lateral excursions: a pilot study.
        Int J Prosthodont. 2011; 24: 133-136
        • Kois J.C.
        • Phillips K.M.
        Occlusal vertical dimension: alteration concerns.
        Compend Contin Educ Dent. 1997; 18: 1169-1180
        • García-Sala Bonmati F.
        • Pérez-Barquero J.A.
        • Ilzarbe Ripoll L.M.
        • Labaig Rueda C.
        • Fernandez-Estevan L.
        • Revilla-León M.
        An additively manufactured, magnetically retained, and stackable implant surgical guide: A dental technique.
        J Prosthet Dent. 2022;
        • Jemt T.
        • Johansson J.
        Implant treatment in the edentulous maxillae: a 15-year follow-up study on 76 consecutive patients provided with fixed prostheses.
        Clin Implant Dent Relat. 2006; 8: 61-69
        • Papaspyridakos P.
        • Chen C.J.
        • Chuang S.K.
        • Weber H.P.
        • Gallucci G.O.
        A systematic review of biologic and technical complications with fixed implant rehabilitations for edentulous patients.
        Int J Oral Maxillofac Implants. 2012; 27: 102-110
        • Nie Q.
        • Kanno Z.
        • Xu T.
        • Lin J.
        • Soma K.
        Clinical study of frontal chewing patterns in various crossbite malocclusions.
        Am J Orthod Dentofacial Orthop. 2010; 138: 323-329
        • Ekfeldt A.
        • Karlsson S.
        Changes of masticatory movement characteristics after prosthodontic rehabilitation of individuals with extensive tooth wear.
        Int J Prosthodont. 1996; 9: 539-546
        • Satokawa Y.
        • Minami I.
        • Wakabayashi N.
        Short-term changes in chewing efficiency and subjective evaluation in normal dentate subjects after insertion of oral appliances with an occlusal flat table.
        J Oral Rehabil. 2018; 45: 116-125
        • Khoury-Ribas L.
        • Ayuso-Montero R.
        • Willaert E.
        • Peraire M.
        • Martinez-Gomis J.
        Changes in masticatory laterality 3 months after treatment with unilateral implant-supported fixed partial prosthesis.
        J Oral Rehabil. 2020; 47: 78-85
        • Revilla-León M.
        • Zeitler J.M.
        • Gómez-Polo M.
        • Kois J.C.
        Utilizing additively manufactured custom devices to record mandibular motion by using optical jaw tracking systems: A dental technique.
        J Prosthet Dent. 2022;