Advertisement
Journal of Prosthetic Dentistry

March 21, 2023

A notable contribution to the dental scientific community

  • Steven J. Sadowsky
Published online: March 21, 2023

Application of 3D-printed guide for locating screw access channels in cement-retained complete arch implant-supported zirconia restorations

  • Asmaa Bukhari,
  • Samantha Dahshan,
  • Elli Kotina,
  • ...
  • Saad Almujel,
  • German O. Gallucci,
  • Adam Hamilton
Published online: March 21, 2023

March 17, 2023

March 15, 2023

Shear bond strength of porcelain to milled and stereolithography additively manufactured zirconia with and without surface treatment: An in vitro study

  • Amirali Zandinejad,
  • Leila Nasiry Khanlar,
  • Abdul Basir Barmak,
  • Masaomi Ikeda,
  • Junji Tagami,
  • Radi Masri
Published online: March 15, 2023

March 13, 2023

March 10, 2023

Does partial adhesive preparation design and finish line depth influence trueness and precision of intraoral scanners?

  • Andrea Baldi,
  • Allegra Comba,
  • Davide Rozzi,
  • ...
  • Luiz Felipe Valandro,
  • Riccardo Michelotto Tempesta,
  • Nicola Scotti
Published online: March 10, 2023

March 9, 2023

Influence of print orientation on the accuracy (trueness and precision) of diagnostic casts manufactured with a daylight polymer printer

  • Jesús Maneiro Lojo,
  • Jorge Alonso Pérez-Barquero,
  • Fernando García-Sala Bonmatí,
  • Rubén Agustín-Panadero,
  • Burak Yilmaz,
  • Marta Revilla-León
Published online: March 09, 2023

March 8, 2023

Evaluation of bond strength of glass and resin-ceramics with laser phototherapy: A systematic review and meta-analysis of in vitro studies

  • Victor Alves Nascimento,
  • Victor Augusto Alves Bento,
  • Kevin Henrique Cruz,
  • Cleber Davi Del Rei Daltro Rosa,
  • Aldiéris Alves Pesqueira,
  • Eduardo Piza Pellizzer
Published online: March 08, 2023

March 6, 2023

Effect of spatial arrangement and clinical service lifetime simulation on the retention of magnetic units used in implant-anchored orbital prostheses

  • Ioli Ioanna Artopoulou,
  • Spiros Zinelis,
  • James C. Lemon,
  • Gregory Polyzois,
  • Mark S. Chambers
Published online: March 06, 2023

Comparison between digital superimposition and microcomputed tomography methods of fit assessment of removable partial denture frameworks

  • Pedro Conceição,
  • Jaime Portugal,
  • Margarida Franco,
  • Nuno M. Alves,
  • Duarte Marques,
  • Cristina B. Neves
Published online: March 06, 2023
Open Access

Number of consecutive procedures after endodontic treatment to extraction: A 28-year retrospective study

  • Paz Kles,
  • Hilit Bar-On,
  • Asher Zabrovsky,
  • Keren Kles,
  • Sharon Eldad,
  • Gilad Ben-Gal
Published online: March 06, 2023

March 3, 2023

Mechanical properties and accuracy of removable partial denture frameworks fabricated by digital and conventional techniques: A systematic review

  • Míria Rafaelli Souza Curinga,
  • Anne Kaline Claudino Ribeiro,
  • Sandra Lúcia Dantas de Moraes,
  • Belmiro Cavalcanti do Egito Vasconcelos,
  • Adriana da Fonte Porto Carreiro,
  • Eduardo Piza Pellizzer
Published online: March 03, 2023

Scanning accuracy and scanning area discrepancies of intraoral digital scans acquired at varying scanning distances and angulations among 4 different intraoral scanners

  • Heather Button,
  • John C. Kois,
  • Abdul B. Barmak,
  • Jonathan M. Zeitler,
  • Vygandas Rutkunas,
  • Marta Revilla-León
Published online: March 03, 2023

A comparison of digital and conventional fabrication techniques for an esthetic maxillofacial prosthesis for the cheek and lip

  • Santiago Costa-Palau,
  • Anna Clua-Palau,
  • Francisco Real-Voltas,
  • Magí Brufau-de Barberà,
  • Josep Cabratosa-Termes
Published online: March 03, 2023

March 2, 2023

Scan accuracy and time efficiency of different implant-supported fixed partial denture situations depending on the intraoral scanner and scanned area: An in vitro study

  • Mustafa Borga Donmez,
  • Ayse Mathey,
  • Fabio Gäumann,
  • Amber Mathey,
  • Burak Yilmaz,
  • Samir Abou-Ayash
Published online: March 02, 2023
Open Access

February 28, 2023

February 24, 2023

February 23, 2023

Impact of intraoral scanner, scanning strategy, and scanned arch on the scan accuracy of edentulous arches: An in vitro study

  • Faris Z. Jamjoom,
  • Adhwaa Aldghim,
  • Omar Aldibasi,
  • Burak Yilmaz
Published online: February 23, 2023
Open Access

Clinical performance of short and extrashort dental implants with wide diameter: A systematic review with meta-analysis

  • Vanessa Felipe Vargas-Moreno,
  • Michele Costa de Oliveira Ribeiro,
  • Rafael Soares Gomes,
  • Fernanda Faot,
  • Altair Antoninha Del Bel Cury,
  • Raissa Micaella Marcello-Machado
Published online: February 23, 2023

February 22, 2023

Effect of supramucosal height of a scan body and implant angulation on the accuracy of intraoral scanning: An in vitro study

  • Elena Sicilia,
  • Gabriela Lagreca,
  • Panos Papaspyridakos,
  • ...
  • Juan Cobo,
  • Wael Att,
  • Marta Revilla-León
Published online: February 22, 2023
Open Access

February 20, 2023

February 18, 2023

A smartphone application with a gray card for clinical shade selection: A technique

  • George Abraham,
  • Nirmal Kurian,
  • Samiksha Wadhwa,
  • Kevin George Varghese
Published online: February 18, 2023

Dental implant and bone augmentation treatment in bone-compromised patients: Oral health-related quality of life outcomes

  • Jonathan F. Leonard,
  • Pamela Taxel,
  • Chia-Ling Kuo,
  • Lucas Da Cunha Godoy,
  • Martin Freilich
Published online: February 18, 2023

February 17, 2023

Exploring digital technologies used in the design and manufacture of craniofacial implant surgical guides: A scoping review

  • Doaa Salem,
  • Peter Reher,
  • Jane L. Evans,
  • Mohammed H. Mansour
Published online: February 17, 2023
Open Access

February 16, 2023

Fracture load of 4-unit interim fixed partial dentures using 3D-printed and traditionally manufactured materials

  • Andreas Greuling,
  • Annika Matthies,
  • Michael Eisenburger
Published online: February 16, 2023

Endocrown fixed partial denture: Is it possible?

  • João Paulo M. Tribst,
  • Amanda Maria de O. Dal Piva,
  • Joris Muris,
  • Cornelis J. Kleverlaan,
  • Albert J. Feilzer
Published online: February 16, 2023
Open Access

February 14, 2023

Clinician evaluation of removable complete denture quality: A systematic review of the criteria and their measurement properties

  • Nareudee Limpuangthip,
  • Metavi Phuckdeedindan,
  • Siraphob Techapiroontong
Published online: February 14, 2023

February 11, 2023

February 10, 2023

Three-dimensional finite element analysis of zygomatic implants for rehabilitation of patients with a severely atrophic maxilla

  • Kevin George Varghese,
  • Nirmal Kurian,
  • Nitasha Gandhi,
  • ...
  • Hemiya Anna Thomas,
  • Nishanth A. Sudharson,
  • Samiksha Wadhwa
Published online: February 10, 2023

February 7, 2023

January 21, 2023

Error analysis of stages involved in CBCT-guided implant placement with surgical guides when different printing technologies are used

  • Brandon Yeager,
  • Gülce Çakmak,
  • Fengyun Zheng,
  • William Michael Johnston,
  • Burak Yilmaz
Published online: January 21, 2023

January 20, 2023

Differences in maxillomandibular relationship recorded at centric relation when using a conventional method, four intraoral scanners, and a jaw tracking system: A clinical study

  • Marta Revilla-León,
  • Rubén Agustín-Panadero,
  • Jonathan M. Zeitler,
  • ...
  • Burak Yilmaz,
  • John C. Kois,
  • Jorge Alonso Pérez-Barquero
Published online: January 20, 2023
Advertisement