Advertisement
Journal of Prosthetic Dentistry

July 11, 2022

A review on the classification of mandibulectomy defects and suggested criteria for a universal description

  • Kiran Jagtiani,
  • Sandeep Gurav,
  • Gurkaranpreet Singh,
  • Kanchan Dholam
Published online: July 11, 2022

July 7, 2022

Industry support for dental implant research: A metatrend study of industry partnership in the development of new technologies

  • Marta M.A. Pereira,
  • Caroline Dini,
  • João G.S. Souza,
  • Valentim A.R. Barão,
  • Erica D. de Avila
Published online: July 07, 2022

Time of day-dependent deviations in dynamic and static occlusion: A prospective clinical study

  • Bernhard Wiechens,
  • Phillipp Brockmeyer,
  • Torsten Wassmann,
  • Matthias Rödiger,
  • Andreas Wiessner,
  • Ralf Bürgers
Published online: July 07, 2022

July 6, 2022

Digital workflow for definitive immediately loaded complete-arch CAD-CAM implant-supported prosthesis in 3 appointments without using intraoral scanning

  • Shaban Burgoa,
  • Alan Jony de Moura e Costa,
  • Dionir Ventura,
  • Otavio Henrique Pinhata-Baptista,
  • Arthur Rodriguez Gonzalez Cortes
Published online: July 06, 2022

July 2, 2022

Response to: Concerns regarding the published article “Potentially carcinogenic effects of hydrogen peroxide for tooth bleaching on the oral mucosa: A systematic review and meta-analysis” by Silveira et al

  • Felipe M. Silveira,
  • Lauren F. Schuch,
  • Tuany R. Schmidt,
  • Marina P. Lopes,
  • Vivian P. Wagner,
  • Bruna B. Só,
  • Renato M. Palo,
  • Manoela D. Martins
Published online: July 02, 2022

July 1, 2022

June 30, 2022

June 29, 2022

Use of botulinum neurotoxin Type A in the management of primary bruxism in adults: An updated systematic review

  • Luiza Abreu Sendra,
  • Lívia Azeredo Alves Antunes,
  • Eliane Porto Barboza
Published online: June 29, 2022

June 28, 2022

June 27, 2022

Accuracy of the 3-dimensional virtual patient representation obtained by using 4 different techniques: An in vitro study

  • Marta Revilla-León,
  • Jonathan M. Zeitler,
  • Abdul B. Barmak,
  • John C. Kois
Published online: June 27, 2022

CAD-CAM denture teeth made on cast metal removable partial denture frameworks

  • Chandni Muralidharan,
  • Robert L. Schneider,
  • Sandra Kotowske
Published online: June 27, 2022

June 25, 2022

Estimation of differences and reapplication effect of peel bond strength between silicone-based and water-based adhesives

  • Rangeela Rajasekaran,
  • Naveen Gopi Chander,
  • Jetty Ramesh Reddy,
  • Muthukumar Balasubramanium
Published online: June 25, 2022

June 24, 2022

Digital workflow for auricular prosthesis fabrication with a negative mold

  • Yunpeng Bi,
  • Minghao Zhou,
  • Hongbo Wei
Published online: June 24, 2022

June 23, 2022

Impact of dental restorations and removable prostheses on potentially malignant oral mucosal disorders in the general population

  • Stefan Kindler,
  • Christian Seebauer,
  • Maria Mksoud,
  • ...
  • Hans-Robert Metelmann,
  • Andrea Rau,
  • Till Ittermann
Published online: June 23, 2022

June 22, 2022

Development and validation of a risk-of-bias tool for assessing in vitro studies conducted in dentistry: The QUIN

  • Vidhi H. Sheth,
  • Naisargi P. Shah,
  • Romi Jain,
  • Nikhil Bhanushali,
  • Vishrut Bhatnagar
Published online: June 22, 2022

June 20, 2022

Assessment of the golden proportion in natural facial esthetics: A systematic review

  • Jimmy Londono,
  • Shohreh Ghasmi,
  • Ghida Lawand,
  • Fatemeh Mirzaei,
  • Fatemeh Akbari,
  • Mahmood Dashti
Published online: June 20, 2022

June 17, 2022

Is temporomandibular joint involvement more frequent in patients with epilepsy? A clinical study

  • Katalin Károlyházy,
  • Andrea Fanni Vass,
  • Anita Csillik,
  • Péter Schmidt,
  • Krisztina Márton
Published online: June 17, 2022
Open Access

June 15, 2022

Impact of different complete coverage onlay preparation designs and the intraoral scanner on the accuracy of digital scans

  • Guilherme Schmitt de Andrade,
  • Julio Nogueira Luz,
  • João Paulo Mendes Tribst,
  • ...
  • Adriano Bressane,
  • Alexandre Luiz Souto Borges,
  • Guilherme de Siqueira Ferreira Anzaloni Saavedra
Published online: June 15, 2022

June 12, 2022

Fatigue and failure analysis of restored endodontically treated maxillary incisors without a dowel or ferrule

  • Marco Aurelio de Carvalho,
  • Priscilla Cardoso Lazari-Carvalho,
  • Altair Antoninha Del Bel Cury,
  • Pascal Magne
Published online: June 12, 2022

June 10, 2022

June 4, 2022

June 3, 2022

Different implant diameters and their effect on stress distribution pattern in 2-implant mandibular overdentures: A 3D finite element analysis study

  • Pravinkumar G. Patil,
  • Liang Lin Seow,
  • Rashmi Uddanwadikar,
  • Allan Pau,
  • Piyush D. Ukey
Published online: June 03, 2022

May 31, 2022

Comparative cost-analysis for removable complete dentures fabricated with conventional, partial, and complete digital workflows

  • Lucio Lo Russo,
  • Khrystyna Zhurakivska,
  • Laura Guida,
  • Konstantinos Chochlidakis,
  • Giuseppe Troiano,
  • Carlo Ercoli
Published online: May 31, 2022

May 27, 2022

Effect of printing layer thickness on the trueness of 3-unit interim fixed partial dentures

  • Gülce Çakmak,
  • Alfonso Rodriguez Cuellar,
  • Mustafa Borga Donmez,
  • ...
  • Wei-En Lu,
  • Martin Schimmel,
  • Burak Yilmaz
Published online: May 27, 2022
Open Access

May 26, 2022

Comparison of loupes versus microscope-enhanced CAD-CAM crown preparations: A microcomputed tomography analysis of marginal gaps

  • Alan M. Atlas,
  • Sridhar Janyavula,
  • Rami Elsabee,
  • ...
  • Wael F. Isleem,
  • Michael Bergler,
  • Frank C. Setzer
Published online: May 26, 2022
Open Access

May 21, 2022

May 20, 2022

May 19, 2022

Influence of postprocessing rinsing solutions and duration on flexural strength of aged and nonaged additively manufactured interim dental material

  • Michael D. Scherer,
  • Nadin Al-Haj Husain,
  • Abdul B. Barmak,
  • John C. Kois,
  • Mutlu Özcan,
  • Marta Revilla-León
Published online: May 19, 2022

May 18, 2022

May 17, 2022

Effect of three-dimensionally printed surface patterns on the peak tensile load of a plasticized acrylic-resin resilient liner

  • Francisco X. Azpiazu-Flores,
  • Diana Leyva del Rio,
  • Scott R. Schricker,
  • William M. Johnston,
  • Damian J. Lee
Published online: May 17, 2022

May 16, 2022

May 14, 2022

Management of gag reflex with a virtual reality headset

  • Shreya Colvenkar,
  • Mohammed Mushahed Ali
Published online: May 14, 2022

May 13, 2022

May 12, 2022

Does enhancement filter application increase the diagnostic accuracy of misfit detection at the implant-prosthesis interface?

  • Sâmia Mouzinho-Machado,
  • Gustavo Bispo Borges,
  • Vanessa Pacheco-de-Oliveira-Mota,
  • Sergio Lins de-Azevedo-Vaz
Published online: May 12, 2022

May 5, 2022

Factors influencing the clinical performance of the restoration of endodontically treated teeth: An assessment of systematic reviews of clinical studies

  • Lara Dotto,
  • Luiza Paloma S. Girotto,
  • Yara Teresinha Correa Silva Sousa,
  • Gabriel Kalil Rocha Pereira,
  • Ataís Bacchi,
  • Rafael Sarkis-Onofre
Published online: May 05, 2022

Accuracy, scanning time, and number of photograms of various scanning patterns for the extraoral digitalization of complete dentures by using an intraoral scanner

  • Miguel Gómez-Polo,
  • Augusto Cimolai,
  • Rocío Ortega,
  • Abdul B. Barmak,
  • John C. Kois,
  • Marta Revilla-León
Published online: May 05, 2022
Advertisement