Advertisement
Journal of Prosthetic Dentistry

June 28, 2022

June 27, 2022

Accuracy of the 3-dimensional virtual patient representation obtained by using 4 different techniques: An in vitro study

  • Marta Revilla-León,
  • Jonathan M. Zeitler,
  • Abdul B. Barmak,
  • John C. Kois
Published online: June 27, 2022

CAD-CAM denture teeth made on cast metal removable partial denture frameworks

  • Chandni Muralidharan,
  • Robert L. Schneider,
  • Sandra Kotowske
Published online: June 27, 2022

June 25, 2022

Estimation of differences and reapplication effect of peel bond strength between silicone-based and water-based adhesives

  • Rangeela Rajasekaran,
  • Naveen Gopi Chander,
  • Jetty Ramesh Reddy,
  • Muthukumar Balasubramanium
Published online: June 25, 2022

June 24, 2022

Digital workflow for auricular prosthesis fabrication with a negative mold

  • Yunpeng Bi,
  • Minghao Zhou,
  • Hongbo Wei
Published online: June 24, 2022

June 22, 2022

Development and validation of a risk-of-bias tool for assessing in vitro studies conducted in dentistry: The QUIN

  • Vidhi H. Sheth,
  • Naisargi P. Shah,
  • Romi Jain,
  • Nikhil Bhanushali,
  • Vishrut Bhatnagar
Published online: June 22, 2022

June 20, 2022

Assessment of the golden proportion in natural facial esthetics: A systematic review

  • Jimmy Londono,
  • Shohreh Ghasmi,
  • Ghida Lawand,
  • Fatemeh Mirzaei,
  • Fatemeh Akbari,
  • Mahmood Dashti
Published online: June 20, 2022

June 17, 2022

Is temporomandibular joint involvement more frequent in patients with epilepsy? A clinical study

  • Katalin Károlyházy,
  • Andrea Fanni Vass,
  • Anita Csillik,
  • Péter Schmidt,
  • Krisztina Márton
Published online: June 17, 2022
Open Access

June 15, 2022

Impact of different complete coverage onlay preparation designs and the intraoral scanner on the accuracy of digital scans

  • Guilherme Schmitt de Andrade,
  • Julio Nogueira Luz,
  • João Paulo Mendes Tribst,
  • ...
  • Adriano Bressane,
  • Alexandre Luiz Souto Borges,
  • Guilherme de Siqueira Ferreira Anzaloni Saavedra
Published online: June 15, 2022

June 12, 2022

Fatigue and failure analysis of restored endodontically treated maxillary incisors without a dowel or ferrule

  • Marco Aurelio de Carvalho,
  • Priscilla Cardoso Lazari-Carvalho,
  • Altair Antoninha Del Bel Cury,
  • Pascal Magne
Published online: June 12, 2022

June 10, 2022

June 4, 2022

June 3, 2022

Different implant diameters and their effect on stress distribution pattern in 2-implant mandibular overdentures: A 3D finite element analysis study

  • Pravinkumar G. Patil,
  • Liang Lin Seow,
  • Rashmi Uddanwadikar,
  • Allan Pau,
  • Piyush D. Ukey
Published online: June 03, 2022

May 31, 2022

Comparative cost-analysis for removable complete dentures fabricated with conventional, partial, and complete digital workflows

  • Lucio Lo Russo,
  • Khrystyna Zhurakivska,
  • Laura Guida,
  • Konstantinos Chochlidakis,
  • Giuseppe Troiano,
  • Carlo Ercoli
Published online: May 31, 2022

May 27, 2022

Effect of printing layer thickness on the trueness of 3-unit interim fixed partial dentures

  • Gülce Çakmak,
  • Alfonso Rodriguez Cuellar,
  • Mustafa Borga Donmez,
  • ...
  • Wei-En Lu,
  • Martin Schimmel,
  • Burak Yilmaz
Published online: May 27, 2022
Open Access

May 26, 2022

Comparison of loupes versus microscope-enhanced CAD-CAM crown preparations: A microcomputed tomography analysis of marginal gaps

  • Alan M. Atlas,
  • Sridhar Janyavula,
  • Rami Elsabee,
  • ...
  • Wael F. Isleem,
  • Michael Bergler,
  • Frank C. Setzer
Published online: May 26, 2022
Open Access

May 21, 2022

May 20, 2022

May 19, 2022

Influence of postprocessing rinsing solutions and duration on flexural strength of aged and nonaged additively manufactured interim dental material

  • Michael D. Scherer,
  • Nadin Al-Haj Husain,
  • Abdul B. Barmak,
  • John C. Kois,
  • Mutlu Özcan,
  • Marta Revilla-León
Published online: May 19, 2022

May 18, 2022

May 17, 2022

Effect of three-dimensionally printed surface patterns on the peak tensile load of a plasticized acrylic-resin resilient liner

  • Francisco X. Azpiazu-Flores,
  • Diana Leyva del Rio,
  • Scott R. Schricker,
  • William M. Johnston,
  • Damian J. Lee
Published online: May 17, 2022

May 16, 2022

May 14, 2022

Management of gag reflex with a virtual reality headset

  • Shreya Colvenkar,
  • Mohammed Mushahed Ali
Published online: May 14, 2022

May 13, 2022

May 12, 2022

Does enhancement filter application increase the diagnostic accuracy of misfit detection at the implant-prosthesis interface?

  • Sâmia Mouzinho-Machado,
  • Gustavo Bispo Borges,
  • Vanessa Pacheco-de-Oliveira-Mota,
  • Sergio Lins de-Azevedo-Vaz
Published online: May 12, 2022

May 5, 2022

Factors influencing the clinical performance of the restoration of endodontically treated teeth: An assessment of systematic reviews of clinical studies

  • Lara Dotto,
  • Luiza Paloma S. Girotto,
  • Yara Teresinha Correa Silva Sousa,
  • Gabriel Kalil Rocha Pereira,
  • Ataís Bacchi,
  • Rafael Sarkis-Onofre
Published online: May 05, 2022

Accuracy, scanning time, and number of photograms of various scanning patterns for the extraoral digitalization of complete dentures by using an intraoral scanner

  • Miguel Gómez-Polo,
  • Augusto Cimolai,
  • Rocío Ortega,
  • Abdul B. Barmak,
  • John C. Kois,
  • Marta Revilla-León
Published online: May 05, 2022

May 4, 2022

May 2, 2022

Preprinted anterior tooth guides used to assist complete denture tooth arrangement

  • Florin-Octavian Froimovici,
  • Lucian Toma Ciocan
Published online: May 02, 2022

Repairability of aged dimethacrylate-free ORMOCER-based dental composite resins with different surface roughening methods and intermediate materials

  • Maryam Pirmoradian,
  • Bahaa Abdulrazzaq Jerri Al-Bakhakh,
  • Marjan Behroozibakhsh,
  • Parham Pedram
Published online: May 02, 2022

Effect of adhesive system, resin cement, heat-pressing technique, and thermomechanical aging on the adhesion between titanium base and a high-performance polymer

  • Burak Yilmaz,
  • Diogo Gouveia,
  • Martin Schimmel,
  • Wei-En Lu,
  • Mutlu Özcan,
  • Samir Abou-Ayash
Published online: May 02, 2022
Open Access

Effect of surface pretreatment and artificial aging on the retention of lithium disilicate crowns cemented to zirconia implant abutments

  • Juston A. Reary,
  • Anastasia Katsavochristou,
  • John M. Powers,
  • Sudarat Kiat-amnuay
Published online: May 02, 2022

Quality and haptic feedback of three-dimensionally printed models for simulating dental implant surgery

  • Xiaotong Wang,
  • Sohaib Shujaat,
  • Eman Shaheen,
  • Reinhilde Jacobs
Published online: May 02, 2022
Open Access

April 30, 2022

Using digital photographs as a tool to assess the clinical color stability of lithium disilicate veneers: A clinical trial

  • Idiane B.L. Soares-Rusu,
  • Carlos A. Villavicencio-Espinoza,
  • Naiara A. de Oliveira,
  • ...
  • Heitor M. Honório,
  • José H. Rubo,
  • Ana F.S. Borges
Published online: April 30, 2022

A custom nasal obturator for velopharyngeal dysfunction: A dental technique

  • Caroline A. Reed,
  • Alison Birch,
  • Trevor Coward
Published online: April 30, 2022

April 29, 2022

Patient-reported outcome measures and prosthetic events in implant-supported mandibular overdenture patients after immediate versus delayed loading: A systematic review and meta-analysis

  • Anne Kaline Claudino Ribeiro,
  • Rayanna Thayse Florêncio Costa,
  • Belmiro Cavalcanti do Egito Vasconcelos,
  • Sandra Lúcia Dantas de Moraes,
  • Adriana da Fonte Porto Carreiro,
  • Eduardo Piza Pellizzer
Published online: April 29, 2022

April 28, 2022

Comparison of different illumination intensities of mobile units for tooth color differentiation: An in vitro study

  • Siegfried Bratner,
  • Wolfgang Hannak,
  • Klaus Boening,
  • Thomas Klinke
Published online: April 28, 2022
Advertisement