Advertisement
Journal of Prosthetic Dentistry

July 2, 2021

July 1, 2021

Evaluation of the sealing capability and morphological fit of prefabricated dowels and fiber-reinforced composite resin: An in vitro study

  • Ana I. Romo Tobías,
  • Diana M. Escobar García,
  • Norma V. Zavala Alonso,
  • ...
  • Alicia Grajales Lagunes,
  • Gabriel F. Romo Ramírez,
  • Marine Ortiz Magdaleno
Published online: July 01, 2021

Cast-free fabrication of a digital removable partial denture with a polyetheretherketone framework

  • Lucio Lo Russo,
  • Eleonora Lo Muzio,
  • Giuseppe Troiano,
  • Laura Guida
Published online: July 01, 2021

Cost and effectiveness of 3-dimensionally printed model using three different printing layer parameters and two resins

  • Caio César Dias Resende,
  • Tiago Augusto Quirino Barbosa,
  • Guilherme Faria Moura,
  • ...
  • Gustavo Mendonça,
  • Karla Zancopé,
  • Flávio Domingues das Neves
Published online: July 01, 2021

June 30, 2021

Visual inspection of implant screw access hole with an endoscope camera

  • Nirmal Kurian,
  • Kevin George Varghese,
  • Kusha Dhawan
Published online: June 30, 2021

Automated vector analysis to design implant-supported prostheses: A dental technique

  • Sangmyeong Tak,
  • Gunwoo Noh,
  • Yuwon Jeong,
  • Hyeonjong Lee
Published online: June 30, 2021

June 26, 2021

Long-term survival and success of zirconia screw-retained implant-supported prostheses for up to 12 years: A retrospective multicenter study

  • Alessandro Pozzi,
  • Lorenzo Arcuri,
  • Giacomo Fabbri,
  • Guido Singer,
  • Jimmy Londono
Published online: June 26, 2021
Open Access

June 25, 2021

June 23, 2021

Bibliometric analysis and evaluation of the Journal of Prosthetic Dentistry from 1970 to 2019

  • Mohammed Nasser Alhajj,
  • Fuad A. Al-Sanabani,
  • Abdulaziz A. Alkheraif,
  • Ahlam Smran,
  • Ali Alqerban,
  • Abdulaziz Samran
Published online: June 23, 2021

June 22, 2021

June 19, 2021

June 18, 2021

Trueness and precision of complete-arch photogrammetry implant scanning assessed with a coordinate-measuring machine

  • Marta Revilla-León,
  • Jeffrey Rubenstein,
  • Mohammed M. Methani,
  • Wenceslao Piedra-Cascón,
  • Mutlu Özcan,
  • Wael Att
Published online: June 18, 2021

June 16, 2021

Marginal adaptation of CAD-CAM and heat-pressed lithium disilicate crowns: A systematic review and meta-analysis

  • Ingrid Bandeira Sanches,
  • Thayara Coelho Metzker,
  • Roniel Kappler,
  • Michelle Villa Oliveira,
  • Adriana Oliveira Carvalho,
  • Emilena Maria Castor Xisto Lima
Published online: June 16, 2021

June 15, 2021

Artificial intelligence applications in implant dentistry: A systematic review

  • Marta Revilla-León,
  • Miguel Gómez-Polo,
  • Shantanu Vyas,
  • ...
  • German O. Galluci,
  • Wael Att,
  • Vinayak R. Krishnamurthy
Published online: June 15, 2021
Open Access

June 11, 2021

June 10, 2021

June 9, 2021

Intaglio surface trueness of milled and 3D-printed digital maxillary and mandibular dentures: A clinical study

  • Lucio Lo Russo,
  • Laura Guida,
  • Khrystyna Zhurakivska,
  • Giuseppe Troiano,
  • Konstantinos Chochlidakis,
  • Carlo Ercoli
Published online: June 09, 2021

Process parameter optimization for removable partial denture frameworks manufactured by selective laser melting

  • Seyeon Hwang,
  • Sangsup An,
  • Ubaldo Robles,
  • Raymond C. Rumpf
Published online: June 09, 2021
Open Access

Influence of base design on the manufacturing accuracy of vat-polymerized diagnostic casts: An in vitro study

  • Marta Revilla-León,
  • Wenceslao Piedra-Cascón,
  • Rocio Aragoneses,
  • ...
  • Basir A. Barmak,
  • Amirali Zandinejad,
  • Ariel J. Raigrodski
Published online: June 09, 2021

June 8, 2021

Assessment of tooth displacement during the cast-free digital processing of milled dentures

  • Lucio Lo Russo,
  • Ji-Man Park,
  • Giuseppe Troiano,
  • Angelo Salamini,
  • Eleonora Lo Muzio,
  • Laura Guida
Published online: June 08, 2021

Influence of collar height of definitive restoration and type of luting cement on the amount of residual cement in implant restorations: A clinical study

  • Pramodkumar Ayyadanveettil,
  • Vinni Thavakkara,
  • Sameera Koodakkadavath,
  • Aneesa Thavakkal
Published online: June 08, 2021

Two-piece oral facial prothesis retained with magnets for a complex maxillary facial defect: A clinical report

  • Kanchan P. Dholam,
  • Gurkaran P. Singh,
  • Neeraja Sathaye,
  • Sandeep V. Gurav,
  • Arati Shinde
Published online: June 08, 2021

June 7, 2021

Partially digital workflow for making complete-arch implant-supported fixed prostheses: A dental technique

  • Ana Larisse Carneiro Pereira,
  • Maria de Fátima Trindade Pinto Campos,
  • Rodrigo Falcão Carvalho Porto de Freitas,
  • ...
  • Jéssica Marcela de Luna Gomes,
  • Eduardo Piza Pellizzer,
  • Adriana da Fonte Porto Carreiro
Published online: June 07, 2021

May 30, 2021

May 28, 2021

Retrospective clinical evaluation of a no-prep porcelain veneer protocol

  • Francesco De Angelis,
  • Camillo D’Arcangelo,
  • Roberta Angelozzi,
  • Mirco Vadini
Published online: May 28, 2021

May 26, 2021

Knife-edged crown fabricated by 3-dimensional gel deposition and soft milling

  • Rong Li,
  • Weiwei Li,
  • Yong Wang,
  • Yuchun Sun
Published online: May 26, 2021

May 25, 2021

Silicone key device for maxilla orientation and occlusal plane recording in a digital workflow

  • Lucas Q. Caponi,
  • Yazan Taha,
  • Nicolas Gutierrez,
  • Miguel Roig C
Published online: May 25, 2021

May 24, 2021

A diagnostically and digitally driven tooth preparation protocol by using a patient monitoring tool with an intraoral scanner

  • Marco Valenti,
  • Johannes H. Schmitz,
  • Davide Cortellini,
  • Alessandro Valenti,
  • Angelo Canale
Published online: May 24, 2021

Illuminant metameric effects on interbrand and intrabrand color differences of direct composite resins

  • Ioannis Brokos,
  • Nick Polychronakis,
  • Gregory Polyzois,
  • Panagiotis Lagouvardos,
  • Ivo Krejci
Published online: May 24, 2021

May 23, 2021

Prospective cohort study to evaluate narrow diameter implants for restoration of a missing lateral incisor in patients with a cleft palate: One-year results

  • Lisa A. Knobloch,
  • Peter Larsen,
  • Edwin McGlumphy,
  • ...
  • Robin Messner,
  • Kyle J. Fogarty,
  • Matthew T. Fogarty
Published online: May 23, 2021

May 21, 2021

Mechanical properties of polymethyl methacrylate as a denture base: Conventional versus CAD-CAM resin – A systematic review and meta-analysis of in vitro studies

  • João Pedro Justino de Oliveira Limírio,
  • Jéssica Marcela de Luna Gomes,
  • Maria Cristina Rosifini Alves Rezende,
  • Cleidiel Aparecido Araújo Lemos,
  • Cleber Davi Del Rei Daltro Rosa,
  • Eduardo Piza Pellizzer
Published online: May 21, 2021

Use of an occlusal ramp for rehabilitation after a mandibulectomy and its effects on mastication

  • Rongguang Liu,
  • Mariko Hattori,
  • Manjin Zhang,
  • Yuka I. Sumita
Published online: May 21, 2021

Comparative evaluation of bacterial colonization on removable dental prostheses in patients with COVID-19: A clinical study

  • Fazel Karimzadeh,
  • Seyed Masoud Sajedi,
  • Saman Taram,
  • Fathemeh Karimzadeh
Published online: May 21, 2021

May 19, 2021

Comparative analysis of smile aesthetics between top celebrity smile and a Southern European population

  • Gema Arroyo-Cruz,
  • Ana Orozco-Varo,
  • María Vilches-Ahumada,
  • Emilio Jiménez-Castellanos
Published online: May 19, 2021

May 16, 2021

May 13, 2021

Fabrication of an implant-retained overdenture with ceramic crowns cemented on a polyetherketoneketone framework: A clinical report

  • Manrique Fonseca,
  • Pedro Molinero-Mourelle,
  • Ramona Buser,
  • Burak Yilmaz,
  • Martin Schimmel
Published online: May 13, 2021
Open Access

Disinfectant effects of Brazilian green propolis alcohol solutions on the Staphylococcus aureus biofilm of maxillofacial prosthesis polymers

  • Mariana Neves de Azevedo,
  • Nathalia Teixeira Marques,
  • Maria Fernanda Lopes Fonseca,
  • ...
  • Vagner Rodrigues Santos,
  • Ricardo Alves Mesquita,
  • Amália Moreno
Published online: May 13, 2021

May 12, 2021

Advertisement