July 2018

Clinical reports

An alternative digital workflow for fabricating a mandibular implant-supported complete fixed dental prosthesis with limited restorative space: A clinical report
• Druthil Belur,
• William W. Nagy
Published online: March 24, 2018
p1-4

Contemporary management and full mouth rehabilitation of a patient with Sjögren syndrome
• Francois Fisselier,
• A. Alper Comut
Published online: December 16, 2017
p5-8

Fabrication of a nonmetal clasp denture supported by an intraoral scanner and CAD-CAM
• Ippei Hamanaka,
• Kota Isshi,
• Yutaka Takahashi
Published online: December 16, 2017
p9-12

Modification of clinically short Locator abutments using laser welding
• Faris Z. Jamjoom,
• Damian J. Lee
Published online: February 08, 2018
p13-16

Dental techniques

The hemi-engaging fixed dental implant prosthesis: A technique for improved stability and handling
• Todd R. Schoenbaum,
• Richard G. Stevenson,
• Eric Balinghasay
Published online: January 06, 2018
p17-19

Single-arch digital removable complete denture: A workflow that starts from the intraoral scan
• Lucio Lo Russo,
• Angelo Salamini
Published online: November 29, 2017
p20-24

Systematic review

Immediate versus early loading of single dental implants: A systematic review and meta-analysis
• Mônica Nogueira Pigozzo,
• Tiago Rebelo da Costa,
• Newton Sesma,
• Dalva Cruz Laganá
Published online: April 24, 2018
p25-34

Clinical research

Comparison between masticatory index and mixing index among complete denture wearers and associated factors: A multivariate analysis
• Hala A. Elmoula,
• Nadia Khalifa,
• Mohammed Nasser Alhajj
Published online: January 06, 2018
p35-42
Modified retention and stability criteria for complete denture wearers: A risk assessment tool for impaired masticatory ability and oral health-related quality of life
• Nareudee Limpuangthip,
• Tewarit Somkotra,
• Mansuang Arksornnukit
Published online: November 29, 2017
p43-49

Radial plane tooth position and bone wall dimensions in the anterior maxilla: A CBCT classification for immediate implant placement
• Howard Gluckman,
• Carla Cruvinel Pontes,
• Jonathan Du Toit
Published online: November 29, 2017
p50-56

Research: implant prosthodontics

Diagnostic accuracy of 4 intraoral radiographic techniques for misfit detection at the implant abutment joint
• Pollyana Darós,
• Vinícius Cavalcanti Carneiro,
• Amanda Pasolini Siqueira,
• Sergio Lins de-Azevedo-Vaz
Published online: November 15, 2017
p57-64

Marginal discrepancy of CAD-CAM complete-arch fixed implant-supported frameworks
• Burak Yilmaz,
• Ediz Kale,
• William M. Johnston
Published online: February 21, 2018
p65-70

Effect of feldspathic porcelain layering on the marginal fit of zirconia and titanium complete-arch fixed implant-supported frameworks
• Burak Yilmaz,
• Faris A. Alshahrani,
• Ediz Kale,
• William M. Johnston
Published online: February 06, 2018
p71-78

Fracture analysis of CAD-CAM high-density polymers used for interim implant-supported fixed, cantilevered prostheses
• Burak Yilmaz,
• Gülce Alp,
• Jeremy Seidt,
• William M. Johnston,
• Roger Vitter,
• Edwin A. McGlumphy
Published online: January 06, 2018
p79-84

Research: fixed prosthodontics

Effect of tooth substrate and porcelain thickness on porcelain veneer failure loads in vitro
• Chunling Ge,
• Chad C. Green,
• Dalene A. Sederstrom,
• Edward A. McLaren,
• James A. Chalfant,
• Shane N. White
Published online: December 19, 2017
p85-91

Effects of different peracetic acid formulations on post space radicular dentin
• Lauriê Garcia Belizário,
• Milton Carlos Kuga,
• Gabriela Mariana Castro-Núñez,
• Wilfredo Gustavo Escalante-Otárola,
• Marcus Vinicius Reis Só,
• Jefferson Ricardo Pereira
Published online: January 06, 2018
p92-98

Research: esthetics

Effect of ceramic material and resin cement systems on the color stability of laminate veneers after accelerated aging
• Seong-Min Lee,
• Yu-Sung Choi
Published online: January 06, 2018
p99-106

Optical behaviors of esthetic CAD-CAM restorations after different surface finishing and polishing procedures and UV aging: An in vitro study
• Hamiyet Kilinc,
• Sedanur Turgut
Published online: January 06, 2018
p107-113

Research: occlusion

Defining centric relation
• Jonathan P. Wiens,
• Gary R. Goldstein,
• Mark Andrawis,
• Mijin Choi,
• Jennifer W. Priebe
Published online: March 08, 2018
p114-122

Research: removable prosthetics

Comparison of digital surface displacements of maxillary dentures based on noninvasive anatomic landmarks
• Nicholas G. Norvell,
• Tom V. Korioth,
• David R. Cagna,
• Antheunis Versluis
Published online: February 08, 2018
p123-131

Research: ceramics

Comparison of the mechanical properties of translucent zirconia and lithium disilicate
• Sung Joon Kwon,
• Nathaniel C. Lawson,
• Edward E. McLaren,
• Amir H. Nejat,
• John O. Burgess
Published online: January 06, 2018
p132-137

Research: impression materials

Disinfection of polyvinyl siloxane impression material by gaseous ozone
• Hakki Celebi,
• Emine Begüm Büyükerkmen,
• Emrah Torlak
Published online: January 06, 2018
p138-143

Maxillofacial prosthetics

Flasking technique with alum crystals for fabricating definitive hollow bulb obturators
• Dipal P. Mawani,
• B.C. Muddugangadhar,
• Arindam Das,
• Vishal Kothari
Published online: December 16, 2017
p144-146

Tips from our readers

Using a secondary impression with a resin index to correct an RPD definitive cast
• Won-suk Oh,
• Ju-mi Park
Published online: March 15, 2018
p147-149

Sponsoring Organization Directory

Sponsoring Organizations Directory July 2018
Published in issue: July 2018
p150-154

Online only articles

Cytotoxic potential of denture base and reline acrylic resins after immersion in disinfectant solutions
• Paula Masetti,
• Maria Isabel Amaya Arbeláez,
• Ana Claudia Pavarina,
• Paula Volpato Sanitá,
• Janaina Habib Jorge
Published online: April 30, 2018
p155.e1-155.e7


Mechanical properties of cobalt-chromium 3-unit fixed dental prostheses fabricated by casting, milling, and additive manufacturing
• Marit Øilo,
• Harald Nesse,
• Odd Johan Lundberg,
• Nils Roar Gjerdet
Published online: April 25, 2018
p156.e1-156.e7

News and Notes
Published in issue: July 2018
p157-159

Frontmatter

Editorial Board
Published in issue: July 2018
A1
Sponsoring Organizations and Liaisons
Published in issue: July 2018
A2
Table of Contents
Published in issue: July 2018
A3-A5
The Essentials
Published in issue: July 2018
A6