September 2018

Clinical reports

Minimally invasive esthetic improvement in a patient with dental fluorosis by using microabrasion and bleaching: A clinical report
• Mario F. Romero,
• Courtney S. Babb,
• Jacqueline Delash,
• William W. Brackett
Published online: April 30, 2018
p323-326

Thermal cracks of implant-based zirconia four-unit restorations: A fractographic analysis of two restorations fractured during production
• Van Ramos Jr.,
• Marit Øilo
Published online: April 05, 2018
p327-330

Dental techniques

Fabrication of an interim complete removable dental prosthesis with an in-office digital light processing three-dimensional printer: A proof-of-concept technique
• Wei-Shao Lin,
• Bryan T. Harris,
• John Pellerito,
• Dean Morton
Published online: April 30, 2018
p331-334

Replicating a discolored tooth preparation: A technique for effective laboratory communication
• Jay D. Matani,
• Mohit G. Kheur,
• Tabrez A. Lakha,
• Vinay Jain
Published online: April 05, 2018
p335-337

Digital technology for performing a nasopalatine and greater palatine nerve block with a modified implant surgical guide: A technique article
• Ankur Dahiya,
• Antoanela Garbacea,
• Mathew T. Kattadiyil,
• Abdulaziz AlHelal
Published online: April 05, 2018
p338-342

Systematic reviews

Intraoral scan bodies in implant dentistry: A systematic review
• Ryan M. Mizumoto,
• Burak Yilmaz
Published online: April 05, 2018
p343-352

Understanding and communicating radiation dose and risk from cone beam computed tomography in dentistry
• Jill Weber Aanenson,
• John E. Till,
• Helen A. Grogan
Published online: April 30, 2018
p353-360

Clinical research

Effects of denture adhesive on the retention of milled and heat-activated maxillary denture bases: A clinical study
• Hamad S. AlRumaih,
• Abdulaziz AlHelal,
• Nadim Z. Baba,
• Charles J. Goodacre,
• Ali Al-Qahtani,
• Mathew T. Kattadiyil
Published online: March 15, 2018
p361-366

Research: implant prosthodontics

Positional accuracy of a prosthetic treatment plan incorporated into a cone beam computed tomography scan using surface scan registration
• Faris Z. Jamjoom,
• Do-Gyoon Kim,
• Edwin A. McGlumphy,
• Damian J. Lee,
• Burak Yilmaz
Published online: April 24, 2018
p367-374

Effect of metal opaquer on the final color of 3 ceramic crown types on 3 abutment configurations
• Rabia Arif,
• Burak Yilmaz,
• Aras Mortazavi,
• Tuncer B. Ozcelik,
• William M. Johnston
Published online: April 30, 2018
p375-381

Research: CAD-CAM

Complete-arch accuracy of intraoral scanners
• Joshua C. Treesh,
• Peter C. Liacouras,
• Robert M. Taft,
• ...
• Daniel O. Ellert,
• Gerald T. Grant,
• Ling Ye
Published online: April 30, 2018
p382-388

Accuracy and reproducibility of virtual edentulous casts created by laboratory impression scan protocols
• Lingyan Peng,
• Li Chen,
• Bryan T. Harris,
• Bikash Bhandari,
• Dean Morton,
• Wei-Shao Lin
Published online: April 24, 2018
p389-395

Marginal adaptation of CAD-CAM onlays: Influence of preparation design and impression technique
• Fernanda Ferruzzi Lima,
• Constantino Fernandes Neto,
• José H. Rubo,
• Gildo Coelho Santos Jr.,
• Maria Jacinta Moraes Coelho Santos
Published online: March 15, 2018
p396-402

Research: fixed prosthodontics

Loss of tooth structure associated with preparation for two monolithic CAD-CAM complete coverage restorations
• Ramtin Sadid-Zadeh,
• Adrian Farsaii,
• Athena Goodarzi,
• Elaine L. Davis
Published online: April 30, 2018
p403-408

Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography
• Elie E. Daou,
• Hani Ounsi,
• Mutlu Özcan,
• Nadin Al-Haj Husain,
• Ziad Salameh
Published online: April 30, 2018
p409-414

Influence of repeated firings on marginal, axial, axio-occlusal, and occlusal fit of metal-ceramic restorations fabricated with different techniques
• Özay Önöral,
• Mutahhar Ulusoy,
• Emre Seker,
• İlker Etikan
Published online: April 05, 2018
p415-420

Research: removable prosthodontics

Biomechanical behavior of 2-implant– and single-implant–retained mandibular overdentures with conventional or mini implants
• Marina Xavier Pisani,
• Anna Gabriella Camacho Presotto,
• Marcelo Ferraz Mesquita,
• Valentim Adelino Ricardo Barão,
• Daniel Takanori Kemmoku,
• Altair Antoninha Del Bel Cury
Published online: April 24, 2018
p421-430

Influence of the mechanical properties of resilient denture liners on the retention of overdenture attachments
• Keitaro Kubo,
• Takashi Koike,
• Takayuki Ueda,
• Kaoru Sakurai
Published online: March 15, 2018
p431-438

Research: ceramics

Analysis of flexural strength and contact pressure after simulated chairside adjustment of pressed lithium disilicate glass-ceramic
• Ali Ramadhan,
• Geoffrey A. Thompson,
• Georgios Maroulakos,
• David Berzins
Published online: April 30, 2018
p439-446

Effects of an etching solution on the adhesive properties and surface microhardness of zirconia dental ceramics
• Sahar Ansari,
• Nozhan Jahedmanesh,
• Domenico Cascione,
• ...
• Kumar C. Shah,
• Benjamin M. Wu,
• Alireza Moshaverinia
Published online: April 24, 2018
p447-453

Research: cements

Effect of different resin cements and surface treatments on the shear bond strength of ceramic-glass polymer materials
• Gülce Alp,
• Meryem Gülce Subaşı,
• William M. Johnston,
• Burak Yilmaz
Published online: April 30, 2018
p454-461

Effects of cyclic staining on the color, translucency, surface roughness, and substance loss of contemporary adhesive resin cements
• Hao Yu,
• Shao-long Cheng,
• Neng-wu Jiang,
• Hui Cheng
Published online: March 17, 2018
p462-469

Research: metals

Effect of chemical surface treatment of titanium on its bond with dental ceramics
• Monika Parchańska-Kowalik,
• Emilia Wołowiec-Korecka,
• Leszek Klimek
Published online: April 05, 2018
p470-475

Maxillofacial prosthetics

Color stability of nonpigmented and pigmented maxillofacial silicone elastomer exposed to 3 different environments
• Ariane Farah,
• Martyn Sherriff,
• Trevor Coward
Published online: April 05, 2018
p476-482

Tips from our readers

An impression technique for patients with fixed orthodontic appliances
• Victor E. de Souza Batista,
• Aljomar J. Vechiato-Filho,
• Fellippo R. Verri
Published online: April 30, 2018
p483-484

Online only article

The effect of colloidal silica and diamond suspensions on the surface roughness of automatically finished heat-polymerized acrylic resin
• Stanley Chibuzor Onwubu,
• Phumlane Selby Mdluli,
• Shenuka Singh
Published in issue: September 2018
p485.e1-485.e5

News and Notes
Published in issue: September 2018
p486-488

Frontmatter

Editorial Board
Published in issue: September 2018
A1
Sponsoring Organizations and Liaisons
Published in issue: September 2018
A2
Table of Contents
Published in issue: September 2018
A3-A5
The Essentials
Published in issue: September 2018
A6