February 2022

Composite resin CAD-CAM restorations for a midline diastema closure: A clinical report

• Wesley F. Vasques,
• Thamir A. Sá,
• Felipe V. Martins,
• Edgard M. Fonseca

Polyetheretherketone custom CAD-CAM splint for treatment of periodontally affected mobile anterior teeth

• Bassem Nabil Elfahl,
• Tamer Mohamed Nasr Mostafa

The digital alveolar cast: A revised approach to an old concept

• Víctor Henarejos-Domingo,
• Sara Neves Madeira,
• Miguel Roig,
• Álvaro Blasi

Additively manufactured implant abutment screw-access guide to remove a cement-retained implant crown: A technique

• Marta Revilla-León,
• Delaram Seyedeh Abaei,
• Adam Tittle,
• Amirali Zandinejad

Digital approach to fabricating a retrofitted abutment for reuse of an existing implant-supported fixed partial denture after the failure of an implant

• Ju-Hyoung Lee

An alternative technique for fabricating an implant-supported interim prosthesis by using a fully digital approach

• Jing Zhang,
• Lin Chen,
• Hongxia Tang,
• Rimei Zhang

Masticatory performance of denture wearers with the use of denture adhesives: A systematic review

• Rayanna Thayse Florêncio Costa,
• Taciana Emília Leite Vila-Nova,
• Arthur José Barbosa de França,
• Bruno Gustavo da Silva Casado,
• Rafaella de Souza Leão,
• Sandra Lúcia Dantas de Moraes

Clinical evaluation of the fit of lithium disilicate crowns fabricated with three different CAD-CAM systems

• Jong-Ju Ahn,
• Eun-Bin Bae,
• Jin-Ju Lee,
• ...
• So-Hyoun Lee,
• Kyu-Bok Lee,
• Jung-Bo Huh

Long-term results of a randomized clinical trial of 2 types of ceramic crowns in participants with extensive tooth wear

• Wedad Hammoudi,
• Mats Trulsson,
• Peter Svensson,
• Jan-Ivan Smedberg

Occlusal re-establishment and clinical complications of resin-bonded fixed partial dental prostheses cemented at an increased occlusal vertical dimension: A retrospective study

• Tong Wah Lim,
• Siti Mariam Ab Ghani,
• Melati Mahmud

Development of a United Kingdom–centric cost-effectiveness model for denture cleaning strategies

• Mike Herdman,
• Ilona Johnson,
• Stephen Mason,
• Christopher R. Vernazza,
• Roshan Varghese

Fracture resistance of additive manufactured and milled implant-supported interim crowns

• Nuria Martín-Ortega,
• Alessandro Sallorenzo,
• Javier Casajús,
• Alberto Cervera,
• Marta Revilla-León,
• Miguel Gómez-Polo

Failure load of milled, 3D-printed, and conventional chairside-dispensed interim 3-unit fixed dental prostheses

• Jeffery Y. Henderson,
• Tom V.P. Korioth,
• Daranee Tantbirojn,
• Antheunis Versluis

Effect of layer thickness setting on the adaptation of stereolithography apparatus–fabricated metal frameworks for removable partial dentures: An in vitro study

• Seung-Gyu You,
• Seung-Min You,
• Beom-Il Lee,
• Dong-Yeon Kim,
• Ji-Hwan Kim

Oriented face-centered cubic to hexagonal close-packed martensitic transition, grain morphology, and mechanical properties of Co-Cr alloy fabricated by selective laser melting

• Xiang Yan,
• Ruodan Jiang,
• Wen Li,
• Hong Lin

Design parameters of polylactic acid custom trays manufactured by fused deposition modeling for partial edentulism: Consideration of the accuracy of the definitive cast

• Hong Li,
• Kenan Ma,
• Yuchun Sun,
• Hu Chen

X-ray microtomographic evaluation of the absolute marginal fit of fixed prostheses made from soft Co-Cr and zirconia

• Elie E. Daou

Effect of ultrasonic activation of the adhesive system on dentin tubule penetration and the pushout bond strength of fiber posts

• Isabel Verdum,
• Igor Abreu de Bem,
• Pedro Henrique Marks Duarte,
• ...
• Jefferson Ricardo Pereira,
• Marcus Vinícius Reis Só,
• Ricardo Abreu da Rosa

Adhesive removable partial denture attachments made from zirconia ceramic: A finite element analysis and in vitro study

• Kamran Orujov,
• Werner Winter,
• Matthias Karl,
• Siegfried Heckmann,
• Tanja Grobecker-Karl

Effect of sealing gel on the microleakage resistance and mechanical behavior during dynamic loading of 3 implant systems

• Ping Yu,
• Zhi Li,
• Xin Tan,
• Haiyang Yu

Effect of abutment finish lines on the mechanical behavior and marginal fit of screw-retained implant crowns: An in vitro study

• Marta García-González,
• Ignacio González-González,
• Ismael García-García,
• ...
• María Jesús Lamela-Rey,
• Alfonso Fernández-Canteli,
• Ángel Álvarez-Arenal

In vitro assessment of polyetheretherketone for an attachment component for an implant-retained overdenture

• Geyson Galo da Silva,
• Marcos Vinicius Wada Shimano,
• Ana Paula Macedo,
• Mariana Lima da Costa Valente,
• Andréa Cândido dos Reis

Amphotericin B, fluconazole, and nystatin as development inhibitors of Candida albicans biofilms on a dental prosthesis reline material: Analytical models in vitro

• Rodrigo C. Bassi,
• Marcelo F.G. Boriollo

Determination of the reliability and repeatability of a quantitative occlusal analyzer by using a piezoelectric film sensor: An in vitro study

• Wonsup Lee,
• Ho-Beom Kwon,
• Myung-Joo Kim,
• Young-Jun Lim

Antagonistic effect of isolated and commercially available probiotics on the growth of Candida albicans on acrylic resin denture surfaces

• Isabela Araguê Catanoze,
• Bruno Guandalini Cunha,
• Gabriella Queiroz Costa,
• Emily Vivianne Freitas da Silva,
• Cristiane Duque,
• Aimée Maria Guiotti

The future of maxillofacial prosthodontics in North America: Part I—Journey to the present

• Johan F. Wolfaardt,
• Lawrence E. Brecht,
• Robert M. Taft

The future of maxillofacial prosthodontics in North America: Part II – A survey

• Johan F. Wolfaardt,
• Lawrence E. Brecht,
• Robert M. Taft

Digital fabrication of an adult speech aid prosthesis by using a 3-dimensionally printed polyetheretherketone framework

• Xi Chen,
• Fang Wang,
• Fangfang Sun,
• Li Zhang,
• Guofeng Wu

Effect of nano-oxides on the color stability of maxillofacial silicone elastomers

• Simindokht Zarrati,
• Mahdi Safi,
• Susan Mir Mohammad Rezaei,
• Leila Shadan

A straightforward technique to obtain a subgingival nonglazed polished zirconia area in monolithic implant-supported prostheses

• Guilherme C. Silva

A cost-effective and straightforward technique to fabricate an intraoral photographic contraster

• Ahmed M. Zaher,
• Melissa Hunt,
• Jimmy Londono

Letter to the editor about the article “Stress distribution with extra-short implants in an angled frictional system: A finite element analysis study”

• Rafael Cury Cecato,

• William de Souza Wiggers,

• Alex Miura

Author response to letter to the editor about the article “Stress distribution with extra-short implants in an angled frictional system: A finite element analysis study”

• Edelcio de Souza Rendohl,

• William Cunha Brandt