April 2023

Restoration of a nonideally placed anterior implant: A clinical report

• Sloan D. McLaughlin,
• Nicholas R. Miller,
• Jennifer V. Sabol

Assisted removal of metal housings from overdentures with a 445-nm diode laser: A dental technique

• Rafael A. Delgado-Ruiz,
• Georgios E. Romanos

Is Down syndrome a risk factor or contraindication for dental implants? A systematic review

• Pedro Henrique da Hora Sales,
• Ana Waleska Pessoa Barros,
• Fernando José Camello de Lima,
• Alessandra de Albuquerque Tavares Carvalho,
• Jair Carneiro Leão

Are implant-supported removable partial dentures a suitable treatment for partially edentulous patients? A systematic review and meta-analysis

• Cleidiel Aparecido Araujo Lemos,
• Rafaela Gaião Nunes,
• Joel Ferreira Santiago-Júnior,
• ...
• Cléber Davi Del Rei Daltro Rosa,
• Fellippo Ramos Verri,
• Eduardo Piza Pellizzer

Evaluation of the clinical performance of dentures manufactured by computer-aided technology and conventional techniques: A systematic review

• Ana Paula Chappuis Chocano,
• Helena Sandrini Venante,
• Rodrigo Moreira Bringel da Costa,
• Mariana Domingues Pordeus,
• Joel Ferreira Santiago Junior,
• Vinicius Carvalho Porto

Measuring tooth movement with treatment using the Dahl principle: An observational study

• Kritesh Bhai,
• Roy Judge,
• Jaafar Abduo,
• Joseph Palamara

Clinical performance of posterior monolithic zirconia implant-supported fixed dental prostheses with angulated screw channels: A 3-year prospective cohort study

• Adolfo Di Fiore,
• Stefano Granata,
• Carlo Monaco,
• Edoardo Stellini,
• Burak Yilmaz

Evaluation of the peri-implant tissues in the esthetic zone with prefabricated titanium or zirconia abutments: A randomized controlled clinical trial with a minimum follow-up of 7 years

• Thais Camargo Bittencourt,
• Neuza Maria Souza Picorelli Assis,
• Cleide Gisele Ribeiro,
• Cimara Fortes Ferreira,
• Bruno Salles Sotto-Maior

Influence of clinician gender, age, and geographic work location on the relative rankings of risk factors for biological complications with dental implant therapy

• Sreenivas Koka,
• Jonathan Bensoussan,
• Donald Curtis

Misfit simulation on implant prostheses with different combinations of engaging and nonengaging titanium bases. Part 1: Stereomicroscopic assessment of the active and passive fit

• Vygandas Rutkunas,
• Julius Dirse,
• Daniel Kules,
• Tomas Simonaitis

Three-dimensional finite element analysis of zygomatic implants for rehabilitation of patients with a severely atrophic maxilla

• Kevin George Varghese,
• Nirmal Kurian,
• Nitasha Gandhi,
• ...
• Hemiya Anna Thomas,
• Nishanth A. Sudharson,
• Samiksha Wadhwa

Effect of short fiber-reinforced composite combined with polyethylene fibers on fracture resistance of endodontically treated premolars

• Sabrina L. Soto-Cadena,
• Norma V. Zavala-Alonso,
• Bernardino I. Cerda-Cristerna,
• Marine Ortiz-Magdaleno

Fracture strength, pull-out bond strength, and volume of luting agent of tooth-colored CAD-CAM post-and-cores

• Hiromi Saisho,
• Gabriela Marcolina,
• Fabricio Perucelli,
• Rogério Goulart da Costa,
• Evelise Machado de Souza,
• Rodrigo Nunes Rached

Fracture load of 4-unit interim fixed partial dentures using 3D-printed and traditionally manufactured materials

• Andreas Greuling,
• Annika Matthies,
• Michael Eisenburger

Dimensional changes of complete dentures fabricated by milled and printed techniques: An in vitro study

• Fu-Chuan Tsai,
• Tsung-Chieh Yang,
• Tong-Mei Wang,
• Li-Deh Lin

Comparison of tensile bond strength of denture reline materials on denture bases fabricated with CAD-CAM technology

• Amireh N. Awad,
• Seok-Hwan Cho,
• Matthew J. Kesterke,
• Jenn-Hwan Chen

Evaluation of the 3D error of 2 face-scanning systems: An in vitro analysis

• Yolanda N.R. Gallardo,
• Rodrigo Salazar-Gamarra,
• Lauren Bohner,
• Juliana I. De Oliveira,
• Luciano L. Dib,
• Newton Sesma

Does partial adhesive preparation design and finish line depth influence trueness and precision of intraoral scanners?

• Andrea Baldi,
• Allegra Comba,
• Davide Rozzi,
• ...
• Luiz Felipe Valandro,
• Riccardo Michelotto Tempesta,
• Nicola Scotti

Influence of yttria content and surface treatment on the strength of translucent zirconia materials

• Edward A. McLaren,
• Anvita Maharishi,
• Shane N. White

Translucency and flexural strength of translucent zirconia ceramics

• Andrea Reale Reyes,
• Joseph B. Dennison,
• John M. Powers,
• Marianella Sierraalta,
• Peter Yaman

Effect of pattern materials and fabrication techniques on the color of a pressed lithium disilicate ceramic: An in vitro study

• Niveen Hazem Zakaria,
• Ihab A. Hammad,
• Yasser M. Aly

Effect of different fabrication methods of occlusal devices on periradicular stress distribution: A photoelastic analysis

• Luciana Paula Benício Arcas,
• Kusai Baroudi,
• Laís Regiane Silva-Concílio,
• Cristiane Aparecida de Assis Claro,
• Marina Amaral

Effects of post-treatment on metal-ceramic bond properties of selective laser melted Co-Cr dental alloy. Part 1: Annealing temperature

• Yanan Zhou,
• Xin Dong,
• Ning Li,
• Jiazhen Yan

A technique for splinting implant impression posts by using nylon sutures

• Nirmal Kurian,
• Nitasha Gandhi,
• Angleena Y. Daniel,
• Kevin George Varghese

News and Notes